Yamaha DXR10mkIII vs RCF NX 910-A

Short answer: choose between the Yamaha DXR10mkIII and RCF NX 910-A for the requirements of the venue and system, not from rank alone. In this size class, coverage, bass extension, output capability, DSP, cabinet construction, and service support often decide the better fit.

Why choose the Yamaha DXR10mkIII. The third-generation DXR10 raises claimed output to 132dB with refined porting and Yamaha’s newest onboard DSP, while staying light at 14.5kg with a familiar 90° x 60° pattern.

Why choose the RCF NX 910-A. The plywood enclosure and FiRPHASE/Bass Motion Control processing make it a sturdier systems alternative to the ART 710-A MK5, with a wide 100° x 60° pattern and 130dB claimed peak.

What to weigh before buying. The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR10mkII is unconfirmed. The truncated vendor measurement does not yield a preference score, preventing a confident tonal comparison with the scored leaders. At 16.4kg it is heavier than the ART-series alternative.

Buy the Yamaha DXR10mkIII when its stated coverage, output, processing, and deployment format best match the job.

Buy the RCF NX 910-A when its stated strengths are the better match for the room and the rest of the PA.

Specifications Side By Side

Related Speaker Comparisons

A few more comparisons worth a look in the same class:

• Yamaha DXR10mkII vs RCF NX 912-A
• Yamaha DXR10mkII vs RCF ART 935-A
• Yamaha DXR10mkII vs RCF ART 745-A MK5
• RCF NX 910-A vs QSC K12.2
• RCF NX 910-A vs Yamaha DXR15mkII

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Yamaha DXR10mkIII: $899.99 Amazon B&H Photo Video Guitar Center eBay

Pros: The third-generation DXR10 raises claimed output to 132dB with refined porting and Yamaha’s newest onboard DSP, while staying light at 14.5kg with a familiar 90° x 60° pattern.

Cons: The low-quality local data is truncated and cannot produce a preference score, so its tonal advantage over the proven DXR10mkII is unconfirmed.

Full Yamaha DXR10mkIII review and specifications →

Amplifier Power	2000W peak / 1000W RMS (1700W LF + 300W HF peak)
Bass Extension (-3dB)	61.5Hz (measured, vendor Spinorama data)
Bluetooth	Bluetooth 5.0 audio streaming and D-Remote control
Cabinet Material	PP plastic
Configuration	Active 2-way bass-reflex PA speaker
Coverage	90° x 60°
Crossover Frequency	1800Hz (FIR-X)
DSP	Yes, FIR-X tuning, Drive Motion Calibration and D-Remote
Dimensions	19.8"H x 12.2"W x 12.2"D (502 x 310 x 310 mm)
Drivers	10" woofer, 1" throat/1.75" diaphragm compression driver
Frequency Response	53Hz - 20kHz (-10dB, manufacturer specified)
Inputs	2 x XLR/TRS combo; XLR thru and DSP outputs
Maximum SPL	132dB peak (manufacturer specified)
Rigging	3 x M8 points plus U-bracket points; 35mm dual-angle pole mount
Weight	32 lbs / 14.5 kg

• Links
  • Yamaha DXR10mkIII Product Information
• Reviews, Comparisons and Sound Samples
  • Spinorama Measurements
• Head-to-Head Comparisons
  • Yamaha DXR10mkIII vs RCF KX 10-A
  • Yamaha DXR10mkIII vs Yamaha DXR10mkII
  • Yamaha DXR10mkIII vs Turbosound NuQ102
  • Yamaha DXR10mkIII vs Vue Audiotechnik A-10
  • Yamaha DXR10mkIII vs RCF ART 710-A MK5
  • Yamaha DXR10mkIII vs Yamaha DBR10
  • Yamaha DXR10mkIII vs QSC K10.2
  • Yamaha DXR10mkIII vs Yamaha DZR10
  • See all 14 comparisons

RCF NX 910-A: $1,349.00 Amazon B&H Photo Video Guitar Center eBay

Pros: The plywood enclosure and FiRPHASE/Bass Motion Control processing make it a sturdier systems alternative to the ART 710-A MK5, with a wide 100° x 60° pattern and 130dB claimed peak.

Cons: The truncated vendor measurement does not yield a preference score, preventing a confident tonal comparison with the scored leaders. At 16.4kg it is heavier than the ART-series alternative.

Full RCF NX 910-A review and specifications →

Amplifier Power	2100W peak (1400W LF + 700W HF)
Bass Extension (-3dB)	69Hz (measured, vendor Spinorama data)
Bluetooth	No
Cabinet Material	Polyurea-coated plywood
Configuration	Active 2-way bass-reflex PA speaker
Coverage	100° x 60°
Crossover Frequency	1600Hz
DSP	Yes, FiRPHASE and Bass Motion Control
Dimensions	20.1"H x 11.6"W x 13.1"D (510 x 294.2 x 332.3 mm)
Drivers	10" woofer, compression driver
Frequency Response	50Hz - 20kHz (manufacturer specified)
Inputs	XLR/TRS combo input and XLR output
Maximum SPL	130dB peak (manufacturer specified)
Rigging	5 x M10 inserts
Weight	36.2 lbs / 16.4 kg

• Links
  • RCF NX 910-A Product Information
• Reviews, Comparisons and Sound Samples
  • Spinorama Measurements
• Head-to-Head Comparisons
  • RCF NX 910-A vs RCF ART 710-A MK5
  • RCF NX 910-A vs Yamaha DBR10
  • RCF NX 910-A vs KV2 Audio EX10
  • RCF NX 910-A vs Yamaha DZR10
  • RCF NX 910-A vs RCF HD 10-A MK5
  • RCF NX 910-A vs Yamaha DXR10mkII
  • RCF NX 910-A vs RCF KX 10-A
  • RCF NX 910-A vs QSC K10.2
  • See all 11 comparisons