RCF ART 735-A MK5 vs JBL PRX915

Last updated: September 29, 2026

Short answer: the JBL PRX915 has been measured and ranked among 15-inch pa speakers; the RCF ART 735-A MK5 has not been independently measured yet, so until it is, this comes down to features and price.

RCF ART 735-A MK5 vs JBL PRX915

What the RCF ART 735-A MK5 offers: A 15” woofer and a 1.4” exit titanium compression driver with a 3” voice coil, powered by 1,400W peak (1,000W LF, 400W HF) with DSP crossover at 800Hz.

What the JBL PRX915 brings: High-quality vendor data shows a 4.77 ideal-subwoofer preference score with 51Hz measured extension, backed by JBL’s extensive service network and 12-band parametric EQ with dbx DriveRack feedback suppression carried over from the JBL PRX912.

On paper: The RCF ART 735-A MK5 is rated down to 45Hz against 48Hz, though makers quote these at different tolerances.

Price: the RCF ART 735-A MK5 lists at $999 and the JBL PRX915 at $1,099.

Buy the JBL PRX915 if you want a speaker whose sound quality has been measured and ranked. It also has Bluetooth.

Buy the RCF ART 735-A MK5 if you want deeper rated bass and a microphone input, and you can wait for measurements to confirm how it sounds.

Still deciding? The full PA & Live Sound rankings cover every ranked option.

Specifications Side By Side

RCF ART 735-A MK5 JBL PRX915
Price$999.00$1,099.00
Ranked-#10 of 38 in 15-Inch PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers15” woofer, 1.4” compression driver with 3” titanium voice coil15” woofer, 1.5” compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)48Hz - 19kHz (-10dB, manufacturer specified)
Amplifier Power1,400W peak (1,000W LF + 400W HF, manufacturer specified)2000W peak / 1000W RMS
Crossover Frequency800Hz (manufacturer specified)1920Hz
Maximum SPL132dB peak (manufacturer specified)133dB peak (manufacturer specified)
Coverage90° x 60°90° x 50°
DSPYes, FiRPHASE, XBOOST, limiting and protectionYes, 12-band parametric EQ and dbx DriveRack
Cabinet MaterialPolypropylene compositePolypropylene/talc composite
RiggingPole mount6 x M10 suspension points; dual 36mm pole sockets
Dimensions708H x 437W x 389D mm28.2”H x 18.3”W x 15.1”D (717 x 465 x 383 mm)
Weight21.4 kg53.1 lbs (24.1 kg)
XLR InputYesYes
TRS InputYesYes
Microphone InputYesNo
BluetoothNoYes, control via JBL Pro Connect app
Inputs-2 x XLR/TRS combo, 3.5mm aux; 2 x XLR thru and XLR mix outputs
Bass Extension (-3dB)-58Hz (measured, vendor Spinorama data)
Spinorama Preference Score-2.40
Spinorama Preference Score with Perfect Sub-4.77
RCA Input-No
Optical Input-No
Coaxial Input-No
USB Input-No
HDMI Input-No
AES Input-No
Aux Input-Yes
Guitar Input-No

Prices on this page were last checked September 29, 2026 at 3:43 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

RCF ART 735-A MK5: $999.00 Amazon B&H Photo Video eBay

RCF ART 735-A MK5 ranking card

Older model: the RCF ART 735-A MK4 (rated 3.2/5).

Pros: A 15” woofer and a 1.4” exit titanium compression driver with a 3” voice coil, powered by 1,400W peak (1,000W LF, 400W HF) with DSP crossover at 800Hz. RCF rates it at 45Hz to 20kHz and 132dB maximum output over 90° x 60° coverage. FiRPHASE phase alignment and XBOOST bass modes can be set from the rear panel or the LiveRemote app, and the mic/line input feeds an XLR link output.

Cons: No independent measurements yet, so its tonal balance and directivity can’t be compared with ranked speakers. At 21.4 kg it is heavy for one person to lift onto a pole, and it needs a subwoofer for deep bass at event levels.

Amplifier Power1,400W peak (1,000W LF + 400W HF, manufacturer specified)
BluetoothNo
Cabinet MaterialPolypropylene composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 60°
Crossover Frequency800Hz (manufacturer specified)
DSPYes, FiRPHASE, XBOOST, limiting and protection
Dimensions708H x 437W x 389D mm
Drivers15” woofer, 1.4” compression driver with 3” titanium voice coil
Frequency Response45Hz - 20kHz (manufacturer specified)
Maximum SPL132dB peak (manufacturer specified)
Microphone InputYes
RiggingPole mount
TRS InputYes
Weight21.4 kg
XLR InputYes

JBL PRX915: $1,099.00 Amazon B&H Photo Video Guitar Center eBay

JBL PRX915 ranking card

Pros: High-quality vendor data shows a 4.77 ideal-subwoofer preference score with 51Hz measured extension, backed by JBL’s extensive service network and 12-band parametric EQ with dbx DriveRack feedback suppression carried over from the JBL PRX912. Measured bass extension of 58Hz (-3dB).

Cons: Its measured preference trails the 12-inch JBL PRX912, and at 24.1kg it is meaningfully heavier to carry to a gig than the smaller model.

AES InputNo
Amplifier Power2000W peak / 1000W RMS
Aux InputYes
Bass Extension (-3dB)58Hz (measured, vendor Spinorama data)
BluetoothYes, control via JBL Pro Connect app
Cabinet MaterialPolypropylene/talc composite
Coaxial InputNo
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 50°
Crossover Frequency1920Hz
DSPYes, 12-band parametric EQ and dbx DriveRack
Dimensions28.2”H x 18.3”W x 15.1”D (717 x 465 x 383 mm)
Drivers15” woofer, 1.5” compression driver
Frequency Response48Hz - 19kHz (-10dB, manufacturer specified)
Guitar InputNo
HDMI InputNo
Inputs2 x XLR/TRS combo, 3.5mm aux; 2 x XLR thru and XLR mix outputs
Maximum SPL133dB peak (manufacturer specified)
Microphone InputNo
Optical InputNo
RCA InputNo
Rigging6 x M10 suspension points; dual 36mm pole sockets
Spinorama Preference Score2.40
Spinorama Preference Score with Perfect Sub4.77
TRS InputYes
USB InputNo
Weight53.1 lbs (24.1 kg)
XLR InputYes