RCF ART 732-A MK5 vs Yamaha DBR12

Last updated: September 7, 2026

Short answer: choose between the RCF ART 732-A MK5 and Yamaha DBR12 for the requirements of the venue and system, not from rank alone. In this size class, coverage, bass extension, output capability, DSP, cabinet construction, and service support often decide the better fit.

Why choose the RCF ART 732-A MK5. Its large 3-inch high-frequency voice coil is a meaningful advantage for vocal headroom and a lower crossover region, while 131dB claimed output and 90° x 60° coverage fit common portable-main work.

Why choose the Yamaha DBR12. A lightweight, widely supported entry point with a useful two-channel mixer, FIR-X crossover processing and straightforward main/monitor presets. The 58Hz measured extension is adequate for speech and modest music playback without a subwoofer.

What to weigh before buying. The local low-quality vendor data does not provide a computed preference score, so its tonal ranking is provisional. Controls are basic, with no app, display or Bluetooth audio. Medium-quality vendor data produces a below-average 4.23 ideal-subwoofer preference score, indicating substantial tonal/directivity compromises. Its 131dB output claim and controls also sit below Yamaha’s DXR and DZR tiers.

Buy the RCF ART 732-A MK5 when its stated coverage, output, processing, and deployment format best match the job.

Buy the Yamaha DBR12 when its stated strengths are the better match for the room and the rest of the PA.

RCF ART 732-A MK5 vs Yamaha DBR12

Specifications Side By Side

RCF ART 732-A MK5 Yamaha DBR12
Price$899.00$390.99
Ranked#18 of 37 in 12-Inch Two-Way Powered PA Speakers#24 of 37 in 12-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers12" woofer, 1.4" compression driver with 3" voice coil12" woofer, 1.4" compression driver
Frequency Response50Hz - 20kHz (manufacturer specified)52Hz - 20kHz (manufacturer specified)
Dimensions25.1"H x 15.2"W x 14.3"D (637 x 387 x 363 mm)23.7"H x 14.8"W x 13.7"D (601 x 376 x 348 mm)
Coverage90° x 60°90° x 60°
Maximum SPL131dB peak (manufacturer specified)131dB peak (manufacturer specified)
InputsXLR/TRS combo2 x XLR/TRS combo, stereo RCA
Amplifier Power1400W peak (1000W LF + 400W HF)1000W dynamic / 465W continuous (800W LF + 200W HF dynamic)
Crossover Frequency700Hz-
Cabinet MaterialPP compositePlastic
Rigging2 x M10 inserts; 35mm pole mount3 x M8 points; 35mm pole mount
DSPYesYes
BluetoothNoNo
Weight39.2 lbs / 17.8 kg34.8 lbs / 15.8 kg
Bass Extension (-3dB)-58Hz (measured, vendor Spinorama data)

A few more comparisons worth a look in the same class:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

RCF ART 732-A MK5: $899.00 Amazon B&H Photo Video Guitar Center eBay

RCF ART 732-A MK5 ranking card

Pros: Its large 3-inch high-frequency voice coil is a meaningful advantage for vocal headroom and a lower crossover region, while 131dB claimed output and 90° x 60° coverage fit common portable-main work. It offers much of RCF’s high-frequency hardware at a lower price than the ART 932-A.

Cons: The local low-quality vendor data does not provide a computed preference score, so its tonal ranking is provisional. Controls are basic, with no app, display or Bluetooth audio.

Amplifier Power1400W peak (1000W LF + 400W HF)
BluetoothNo
Cabinet MaterialPP composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 60°
Crossover Frequency700Hz
DSPYes
Dimensions25.1"H x 15.2"W x 14.3"D (637 x 387 x 363 mm)
Drivers12" woofer, 1.4" compression driver with 3" voice coil
Frequency Response50Hz - 20kHz (manufacturer specified)
InputsXLR/TRS combo
Maximum SPL131dB peak (manufacturer specified)
Rigging2 x M10 inserts; 35mm pole mount
Weight39.2 lbs / 17.8 kg

Yamaha DBR12: $390.99 Amazon B&H Photo Video Guitar Center eBay

Yamaha DBR12 ranking card

Pros: A lightweight, widely supported entry point with a useful two-channel mixer, FIR-X crossover processing and straightforward main/monitor presets. The 58Hz measured extension is adequate for speech and modest music playback without a subwoofer.

Cons: Medium-quality vendor data produces a below-average 4.23 ideal-subwoofer preference score, indicating substantial tonal/directivity compromises. Its 131dB output claim and controls also sit below Yamaha’s DXR and DZR tiers.

Amplifier Power1000W dynamic / 465W continuous (800W LF + 200W HF dynamic)
Bass Extension (-3dB)58Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPlastic
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 60°
DSPYes
Dimensions23.7"H x 14.8"W x 13.7"D (601 x 376 x 348 mm)
Drivers12" woofer, 1.4" compression driver
Frequency Response52Hz - 20kHz (manufacturer specified)
Inputs2 x XLR/TRS combo, stereo RCA
Maximum SPL131dB peak (manufacturer specified)
Rigging3 x M8 points; 35mm pole mount
Weight34.8 lbs / 15.8 kg