RCF NX 932-A vs RCF ART 732-A MK5

Last updated: September 7, 2026

Short answer: these RCF NX 932-A and RCF ART 732-A MK5 alternatives share a brand and size class, but their coverage, driver architecture, cabinet format, processing, and output priorities can make them fit very different jobs.

Why choose the RCF NX 932-A. A 3-inch titanium compression-driver diaphragm, 100° x 70° coverage and plywood cabinet make it especially capable for clear vocals over wide areas. The 2100W amplifier, advanced RCF processing and 132dB peak claim support serious main-speaker use.

Why choose the RCF ART 732-A MK5. Its large 3-inch high-frequency voice coil is a meaningful advantage for vocal headroom and a lower crossover region, while 131dB claimed output and 90° x 60° coverage fit common portable-main work.

What to weigh before buying. The medium-quality Spinorama measurement is truncated and cannot generate a preference score, so its high position relies partly on response/directivity curves and published engineering. At 22.9kg it is significantly heavier than the ART 932-A. The local low-quality vendor data does not provide a computed preference score, so its tonal ranking is provisional. Controls are basic, with no app, display or Bluetooth audio.

Buy the RCF NX 932-A when its stated coverage, output, processing, and deployment format best match the job.

Buy the RCF ART 732-A MK5 when its stated strengths are the better match for the room and the rest of the PA.

RCF NX 932-A vs RCF ART 732-A MK5

Specifications Side By Side

RCF NX 932-A RCF ART 732-A MK5
Price$1,999.00$899.00
Ranked#8 of 37 in 12-Inch Two-Way Powered PA Speakers#18 of 37 in 12-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers12" woofer, 1.4" exit/3" diaphragm compression driver12" woofer, 1.4" compression driver with 3" voice coil
Frequency Response45Hz - 20kHz (manufacturer specified)50Hz - 20kHz (manufacturer specified)
Dimensions24.4"H x 14.3"W x 15.9"D (620 x 362 x 405 mm)25.1"H x 15.2"W x 14.3"D (637 x 387 x 363 mm)
Bass Extension (-3dB)61.5Hz (measured, vendor Spinorama data)-
Coverage100° x 70°90° x 60°
Maximum SPL132dB peak (manufacturer specified)131dB peak (manufacturer specified)
InputsXLR/TRS combo input and XLR outputXLR/TRS combo
Amplifier Power2100W peak (1400W LF + 700W HF)1400W peak (1000W LF + 400W HF)
Crossover Frequency700Hz700Hz
Cabinet MaterialPlywoodPP composite
Rigging6 x M10 inserts, 4 quick-lock points; 35mm pole mount2 x M10 inserts; 35mm pole mount
DSPYes, FiRPHASE and Bass Motion ControlYes
BluetoothNoNo
Weight50.5 lbs / 22.9 kg39.2 lbs / 17.8 kg

More useful head-to-heads from the same speaker class:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

RCF NX 932-A: $1,999.00 Amazon B&H Photo Video Guitar Center eBay

RCF NX 932-A ranking card

Pros: A 3-inch titanium compression-driver diaphragm, 100° x 70° coverage and plywood cabinet make it especially capable for clear vocals over wide areas. The 2100W amplifier, advanced RCF processing and 132dB peak claim support serious main-speaker use.

Cons: The medium-quality Spinorama measurement is truncated and cannot generate a preference score, so its high position relies partly on response/directivity curves and published engineering. At 22.9kg it is significantly heavier than the ART 932-A.

Amplifier Power2100W peak (1400W LF + 700W HF)
Bass Extension (-3dB)61.5Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPlywood
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 70°
Crossover Frequency700Hz
DSPYes, FiRPHASE and Bass Motion Control
Dimensions24.4"H x 14.3"W x 15.9"D (620 x 362 x 405 mm)
Drivers12" woofer, 1.4" exit/3" diaphragm compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR/TRS combo input and XLR output
Maximum SPL132dB peak (manufacturer specified)
Rigging6 x M10 inserts, 4 quick-lock points; 35mm pole mount
Weight50.5 lbs / 22.9 kg

RCF ART 732-A MK5: $899.00 Amazon B&H Photo Video Guitar Center eBay

RCF ART 732-A MK5 ranking card

Pros: Its large 3-inch high-frequency voice coil is a meaningful advantage for vocal headroom and a lower crossover region, while 131dB claimed output and 90° x 60° coverage fit common portable-main work. It offers much of RCF’s high-frequency hardware at a lower price than the ART 932-A.

Cons: The local low-quality vendor data does not provide a computed preference score, so its tonal ranking is provisional. Controls are basic, with no app, display or Bluetooth audio.

Amplifier Power1400W peak (1000W LF + 400W HF)
BluetoothNo
Cabinet MaterialPP composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 60°
Crossover Frequency700Hz
DSPYes
Dimensions25.1"H x 15.2"W x 14.3"D (637 x 387 x 363 mm)
Drivers12" woofer, 1.4" compression driver with 3" voice coil
Frequency Response50Hz - 20kHz (manufacturer specified)
InputsXLR/TRS combo
Maximum SPL131dB peak (manufacturer specified)
Rigging2 x M10 inserts; 35mm pole mount
Weight39.2 lbs / 17.8 kg