Short answer: the Polk Monitor XT20. It ranks #86 of 122 bookshelf speakers by sound quality at $279; the Klipsch RP-600M ranks #100 and costs $343.22, so there is not much of a tradeoff to weigh.
What the Polk Monitor XT20 offers: Two-way bookshelf design with a 1” tweeter and 6.5” woofer, part of Polk’s budget-friendly XT lineup (spanning roughly $200-700 across the series). Measures more linear and has fewer/smaller cabinet resonances than its smaller sibling, the XT15, making it - by the reviewer’s own assessment - probably the better of the two based on data alone. Reasonably good bass output for the price and size, with an F3 of 63Hz. Horizontal radiation of about ±50° gives a respectable, enjoyable soundstage width. Takes well to EQ correction - the early-reflections directivity trend is decently linear, meaning tonal adjustments can meaningfully improve the sound. Provides usable, respectable volume when paired with a subwoofer crossover, even though it isn’t intended to play extremely loud on its own. Watch for: Notably bright treble, elevated roughly 1-5dB above the midrange depending on frequency - a characteristic shared across the whole Polk XT lineup, requiring either EQ or toe-out to tame. Small resonances appear around 300Hz and 800Hz, with some of that energy leaking from the port area. Vertical listening window is narrow - best kept close to the tweeter axis, with only a couple of degrees of tolerance above or below before the sound changes. Still needs a subwoofer for real low-end extension despite the decent F3. Overall linearity isn’t state-of-the-art flat, and while the reviewer found it pleasant, some artificial brightness remains even after basic EQ correction in the crossover region.
What the Klipsch RP-600M offers: More linear horizontal dispersion than the updated RP-600M II - as you move side-to-side, the tonal character changes less, a genuine advantage for off-axis listening consistency. Takes exceptionally well to EQ correction (miniDSP or similar), letting a knowledgeable owner fix its tonal shortcomings without needing to upgrade. Standard 6.5” woofer/horn-tweeter two-way design with reasonably gradual bass rolloff (F3 ~70Hz, F10 ~40Hz) rather than a steep vented-enclosure cutoff. Watch for: A strong, annoying resonance in the lower vocal range around 300Hz stands out clearly (though it can be EQ’d out). Overall tonal balance is notably less neutral than the newer RP-600M II, with a roughly 3-4dB suckout in the estimated in-room response. The waveguide doesn’t extend flush to the baffle edge, increasing diffraction compared to the redesigned version. Klipsch’s marketed sensitivity spec (about 96dB) is a half-space, in-room-style rating roughly 9dB above the true anechoic figure (closer to 85-86dB), which can mislead buyers comparing spec sheets. Elevated treble on-axis, similar to its successor, benefits from toe-out or careful placement. Vertical listening tolerance is limited to about ±10° from the tweeter axis. Still needs a subwoofer for real bass weight; a boost around 120Hz gives kick drums their “tambour” without the underlying “meat.”
Buy the Polk Monitor XT20. It ranks higher for sound quality than the Klipsch RP-600M and costs less, so there is no real case for the other one.
If sound quality matters at all to you, skip the Klipsch RP-600M. It ranks near the bottom of the 122 bookshelf speakers, so look higher up the list instead.
Specifications Side By Side
| Polk Monitor XT20 | Klipsch RP-600M | |
|---|---|---|
| Price | $279.00 | $343.22 Discontinued |
| Ranked | #86 of 122 in Large Size Bookshelf Speakers | #100 of 122 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 50Hz (measured, Erin’s Audio Corner) | 40Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 75Hz (measured, Erin’s Audio Corner) | 73Hz (measured, Erin’s Audio Corner) |
| Dimensions | 13"H x 7.5"W x 11"D (330.2 x 190.5 x 279.4 mm) | 15.7"H x 8"W x 11.9"D (398.8 x 203.2 x 302.3 mm) |
| Impedance | 8 ohms nominal (measured, Erin’s Audio Corner) | 8 ohms nominal, 3.5 ohms minimum (measured, Erin’s Audio Corner) |
| Sensitivity | 86dB (measured by Erin’s Audio Corner; 87dB manufacturer specified) | 85.2dB (measured, Erin’s Audio Corner) |
| Drivers | 6.5" bilaminate paper cone woofer, 1" Terylene dome tweeter | 6.5" Cerametallic cone woofer, 1" titanium LTS vented tweeter with Tractrix horn |
| Weight | 11.9 lbs / 5.4 kg each | 16.1 lbs / 7.3 kg each |
| Woofer Cabinet | ported | ported |
| Discontinued | - | Yes |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Wharfedale Diamond 9.1 vs Triangle Borea BR03
- Emotiva Airmotiv B2+ vs Wharfedale Diamond 9.1
- Infinity IL10 vs KEF Q3 Meta
- HiVi Swans 3.1A Sehlin Sound Solutions mod vs Polk Monitor XT20
- ELAC Debut 2.0 B6.2 vs Polk Monitor XT20
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Polk Monitor XT20: $279.00 Amazon Crutchfield eBay
Pros: Two-way bookshelf design with a 1” tweeter and 6.5” woofer, part of Polk’s budget-friendly XT lineup (spanning roughly $200-700 across the series). Measures more linear and has fewer/smaller cabinet resonances than its smaller sibling, the XT15, making it - by the reviewer’s own assessment - probably the better of the two based on data alone. Reasonably good bass output for the price and size, with an F3 of 63Hz. Horizontal radiation of about ±50° gives a respectable, enjoyable soundstage width. Takes well to EQ correction - the early-reflections directivity trend is decently linear, meaning tonal adjustments can meaningfully improve the sound. Provides usable, respectable volume when paired with a subwoofer crossover, even though it isn’t intended to play extremely loud on its own.
Cons: Notably bright treble, elevated roughly 1-5dB above the midrange depending on frequency - a characteristic shared across the whole Polk XT lineup, requiring either EQ or toe-out to tame. Small resonances appear around 300Hz and 800Hz, with some of that energy leaking from the port area. Vertical listening window is narrow - best kept close to the tweeter axis, with only a couple of degrees of tolerance above or below before the sound changes. Still needs a subwoofer for real low-end extension despite the decent F3. Overall linearity isn’t state-of-the-art flat, and while the reviewer found it pleasant, some artificial brightness remains even after basic EQ correction in the crossover region.
Full Polk Monitor XT20 review and specifications →
| Bass Extension (-10dB) | 50Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 75Hz (measured, Erin's Audio Corner) |
| Dimensions | 13"H x 7.5"W x 11"D (330.2 x 190.5 x 279.4 mm) |
| Drivers | 6.5" bilaminate paper cone woofer, 1" Terylene dome tweeter |
| Impedance | 8 ohms nominal (measured, Erin's Audio Corner) |
| Sensitivity | 86dB (measured by Erin's Audio Corner; 87dB manufacturer specified) |
| Weight | 11.9 lbs / 5.4 kg each |
| Woofer Cabinet | ported |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: Polk’s new budget XT Speakers. Reviewed! More from Erin’s Audio Corner →
- Erin’s Audio Corner Website Polk Monitor XT20
- Erin’s Audio Corner: 10 Great (and Terrible) Speakers Under $300!
- Erin’s Audio Corner: Budget Stereo Systems You Will Love
- Erin’s Audio Corner Measurements (spinorama.org)
- Reddit Search for Polk Monitor XT20 Review
- Head-to-Head Comparisons
- Polk Monitor XT20 vs KEF Q3 Meta
- Polk Monitor XT20 vs Sonus Faber Lumina II
- Polk Monitor XT20 vs SVS Prime Bookshelf
- Polk Monitor XT20 vs Focal Aria 906
- Polk Monitor XT20 vs ELAC Debut 2.0 B6.2
- Polk Monitor XT20 vs Revel Performa M22
- Polk Monitor XT20 vs Dynaudio Special Forty
- Polk Monitor XT20 vs Polk R200
- See all 28 comparisons
Klipsch RP-600M: $343.22 Discontinued Amazon eBay
Pros: More linear horizontal dispersion than the updated RP-600M II - as you move side-to-side, the tonal character changes less, a genuine advantage for off-axis listening consistency. Takes exceptionally well to EQ correction (miniDSP or similar), letting a knowledgeable owner fix its tonal shortcomings without needing to upgrade. Standard 6.5” woofer/horn-tweeter two-way design with reasonably gradual bass rolloff (F3 ~70Hz, F10 ~40Hz) rather than a steep vented-enclosure cutoff.
Cons: A strong, annoying resonance in the lower vocal range around 300Hz stands out clearly (though it can be EQ’d out). Overall tonal balance is notably less neutral than the newer RP-600M II, with a roughly 3-4dB suckout in the estimated in-room response. The waveguide doesn’t extend flush to the baffle edge, increasing diffraction compared to the redesigned version. Klipsch’s marketed sensitivity spec (about 96dB) is a half-space, in-room-style rating roughly 9dB above the true anechoic figure (closer to 85-86dB), which can mislead buyers comparing spec sheets. Elevated treble on-axis, similar to its successor, benefits from toe-out or careful placement. Vertical listening tolerance is limited to about ±10° from the tweeter axis. Still needs a subwoofer for real bass weight; a boost around 120Hz gives kick drums their “tambour” without the underlying “meat.”. Discontinued.
Full Klipsch RP-600M review and specifications →
| Bass Extension (-10dB) | 40Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 73Hz (measured, Erin's Audio Corner) |
| Dimensions | 15.7"H x 8"W x 11.9"D (398.8 x 203.2 x 302.3 mm) |
| Discontinued | Yes |
| Drivers | 6.5" Cerametallic cone woofer, 1" titanium LTS vented tweeter with Tractrix horn |
| Impedance | 8 ohms nominal, 3.5 ohms minimum (measured, Erin's Audio Corner) |
| Sensitivity | 85.2dB (measured, Erin's Audio Corner) |
| Weight | 16.1 lbs / 7.3 kg each |
| Woofer Cabinet | ported |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: The Truth about Klipsch’s “NEW” Sound. RP-600M Update. More from Erin’s Audio Corner →
- Erin’s Audio Corner Website Klipsch RP-600M
- GR-Research: We Bought The “NEW” RP-600M II Is KLIPSCH Listening?! More from GR-Research →
- Audio Science Review Measurements More from Audio Science Review →
- Audio Science Review Measurements (spinorama.org)
- Reddit Search for Klipsch RP-600M Review
- Head-to-Head Comparisons
- Klipsch RP-600M vs Sonus Faber Lumina II Amator
- Klipsch RP-600M vs Wharfedale Diamond 9.1
- Klipsch RP-600M vs Triangle Borea BR03
- Klipsch RP-600M vs KEF Q350
- Klipsch RP-600M vs B&W 805S
- Klipsch RP-600M vs Sonus Faber Sonetto II G2
- Klipsch RP-600M vs Aperion Audio Verus V8B
- Klipsch RP-600M vs Emotiva Airmotiv B2+
- See all 19 comparisons