Short answer: the MoFi SourcePoint 10 on measured sound quality, the Perlisten A3m on price. The MoFi SourcePoint 10 ranks #26 of 130 bookshelf speakers at $3795. The Perlisten A3m ranks #43 at $3000, $795 cheaper.
What the Perlisten A3m offers: Manufacturer data shows a narrow 1.8dB reference band, 0.305dB on-axis average absolute deviation, 0.457 listening-window smoothness, and a rated 111.4dB peak at 1m. Its preference score rises from 3.39 to 6.42 with a subwoofer. A sealed cabinet, two 8-inch carbon-fiber woofers, and a controlled tweeter waveguide make this a high-output monitor. Watch for: The low-quality vendor Spinorama data measures only 85.8Hz at -3dB, 74.1Hz at -6dB, and 55.7Hz at -12dB, conflicting with Perlisten’s much deeper in-room extension claim. A 3.70 sound-power directivity-index standard deviation and 0.295 predicted-in-room smoothness are merely average. It is large, heavy, 4-ohm nominal, and expensive at $3,000/pair.
What the MoFi SourcePoint 10 offers: Andrew Jones-designed concentric/coincident driver delivers best-in-class sound power and early-reflections directivity in the reviewer’s testing - a genuine “point source” design. Vertical and horizontal radiation patterns closely match each other (about ±50° horizontal, ±30-40° vertical), a hallmark benefit of a well-executed concentric driver. Distortion stays low - under 1% above 100Hz at 86dB, and under 3% up to 100Hz even at 96dB, better than the reviewer expected from a low-excursion waveguide-loaded woofer. Surprisingly strong dynamic capability with little audible compression at both low and high volume. Widely spaced (about 11 feet apart) with roughly 15° of toe-out produced a huge, expansive soundstage without significant loss of imaging precision. Solidly built cabinet (about 40 lbs, heavily braced) minimizes cabinet resonance. Watch for: Like virtually all coincident designs, sounds notably bright pointed directly on-axis due to a deliberate treble lift (meant to compensate for the 28mm tweeter’s earlier beaming versus a typical 25mm/1” tweeter) combined with a diffraction dip/peak from the waveguide edge; needs about 15° of toe-out to sound neutral, and even then benefits from an extra 1-2dB of treble EQ. Toeing out further (to 30°) flattens the treble further but introduces a dip in the midrange-to-tweeter crossover region - there’s no single toe-out angle that fixes everything at once. F3 of 56Hz and F10 of 38Hz (about 40Hz in-room) mean genuine deep bass is limited; the reviewer would pair it with a sealed 10” or 12” subwoofer for regular daily listening. Bass extension and cabinet placement trade off against midrange cleanliness: placing it close to a wall for more bass risks a wall-bounce suckout in the midrange (roughly 200-500Hz depending on distance). Not perfectly time-aligned between tweeter and woofer (about 0.4ms delta), an inherent limitation of passive coincident drivers versus actively time-corrected designs. Some resonances appear in measurements, likely port-related. Minimum impedance around 6.4 ohms with EPDR near 3 ohms, so the reviewer recommends sticking with a 4-ohm-rated amplifier to be safe.
Buy the Perlisten A3m when the price outweighs sound quality for you, and the MoFi SourcePoint 10 when sound quality outweighs the price instead.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| Perlisten A3m | MoFi SourcePoint 10 | |
|---|---|---|
| Price | $3,000 per pair | $3795 per pair |
| Ranked | #43 of 130 in Large Size Bookshelf Speakers | #26 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-3dB) | 85.8Hz (measured, spinorama.org) | 56Hz (measured, Erin's Audio Corner) |
| Bass Extension (-10dB) | approximately 61Hz (measured, spinorama.org) | 38Hz (measured, Erin's Audio Corner) |
| Enclosure | Sealed | - |
| Drivers | Two 8-inch carbon-fiber woofers; 35mm Teteron dome tweeter | 10" Paper-pulp Cone woofer, 1.25-inch soft-dome tweeter |
| Sensitivity | 87.4dB at 2.83V/1m | 88.2dB (measured, Erin's Audio Corner) |
| Impedance | 4 ohms nominal; 3 ohms minimum | 8 ohms nominal, 6.4 ohms minimum (measured, Erin's Audio Corner) |
| Dimensions | 26.6 x 11.0 x 13.8 in each | 22.5"H x 14.5"W x 16.6"D (571.5 x 368.3 x 421.6 mm) |
| Maximum SPL | 111.4dB peak at 1m (manufacturer specified) | - |
| Spinorama Preference Score | 3.39 | 3.25 |
| Spinorama Preference Score with Perfect Sub | 6.42 | 5.27 |
| Weight | - | 46.3 lbs (21.0 kg) each |
| Woofer Cabinet | - | ported, rear |
Related Speaker Comparisons
More worthwhile head-to-heads for MoFi SourcePoint 10:
- MoFi SourcePoint 10 vs Perlisten S4b
- KEF Reference 1 Meta vs MoFi SourcePoint 10
- GR-Research NX-Studio vs MoFi SourcePoint 10
- AsciLab C6B vs MoFi SourcePoint 10
- Audio First Cadentia 3 vs MoFi SourcePoint 10
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Perlisten A3m: $3,000 per pair Perlisten Dealer Network eBay
Pros: Manufacturer data shows a narrow 1.8dB reference band, 0.305dB on-axis average absolute deviation, 0.457 listening-window smoothness, and a rated 111.4dB peak at 1m. Its preference score rises from 3.39 to 6.42 with a subwoofer. A sealed cabinet, two 8-inch carbon-fiber woofers, and a controlled tweeter waveguide make this a high-output monitor. Measured bass extension of 85.8Hz (-3dB).
Cons: The low-quality vendor Spinorama data measures only 85.8Hz at -3dB, 74.1Hz at -6dB, and 55.7Hz at -12dB, conflicting with Perlisten’s much deeper in-room extension claim. A 3.70 sound-power directivity-index standard deviation and 0.295 predicted-in-room smoothness are merely average. It is large, heavy, 4-ohm nominal, and expensive at $3,000/pair.
Full Perlisten A3m review and specifications →
| Bass Extension (-10dB) | approximately 61Hz (measured, spinorama.org) |
|---|---|
| Bass Extension (-3dB) | 85.8Hz (measured, spinorama.org) |
| Dimensions | 26.6 x 11.0 x 13.8 in each |
| Drivers | Two 8-inch carbon-fiber woofers; 35mm Teteron dome tweeter |
| Enclosure | Sealed |
| Impedance | 4 ohms nominal; 3 ohms minimum |
| Maximum SPL | 111.4dB peak at 1m (manufacturer specified) |
| Sensitivity | 87.4dB at 2.83V/1m |
| Spinorama Preference Score | 3.39 |
| Spinorama Preference Score with Perfect Sub | 6.42 |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Perlisten A3m vs ELAC Debut 3.0 DB63
- Perlisten A3m vs Aalto Speakers Aalto 3 Passive
- Perlisten A3m vs Emotiva Airmotiv XB2
- Perlisten A3m vs Ascend Acoustics Sierra-2EX V2
- Perlisten A3m vs Philharmonic BMR (v1)
- Perlisten A3m vs Ascend Acoustics Sierra-LX
- Perlisten A3m vs Wharfedale Linton 85
- Perlisten A3m vs ELAC DBR62
- See all 44 comparisons
MoFi SourcePoint 10: $3795 per pair Crutchfield eBay
Pros: Andrew Jones-designed concentric/coincident driver delivers best-in-class sound power and early-reflections directivity in the reviewer’s testing - a genuine “point source” design. Vertical and horizontal radiation patterns closely match each other (about ±50° horizontal, ±30-40° vertical), a hallmark benefit of a well-executed concentric driver. Distortion stays low - under 1% above 100Hz at 86dB, and under 3% up to 100Hz even at 96dB, better than the reviewer expected from a low-excursion waveguide-loaded woofer. Surprisingly strong dynamic capability with little audible compression at both low and high volume. Widely spaced (about 11 feet apart) with roughly 15° of toe-out produced a huge, expansive soundstage without significant loss of imaging precision. Solidly built cabinet (about 40 lbs, heavily braced) minimizes cabinet resonance. Measured bass extension of 56Hz (-3dB), with a measured sensitivity of 88.2dB.
Cons: Like virtually all coincident designs, sounds notably bright pointed directly on-axis due to a deliberate treble lift (meant to compensate for the 28mm tweeter’s earlier beaming versus a typical 25mm/1” tweeter) combined with a diffraction dip/peak from the waveguide edge; needs about 15° of toe-out to sound neutral, and even then benefits from an extra 1-2dB of treble EQ. Toeing out further (to 30°) flattens the treble further but introduces a dip in the midrange-to-tweeter crossover region - there’s no single toe-out angle that fixes everything at once. F3 of 56Hz and F10 of 38Hz (about 40Hz in-room) mean genuine deep bass is limited; the reviewer would pair it with a sealed 10” or 12” subwoofer for regular daily listening. Bass extension and cabinet placement trade off against midrange cleanliness: placing it close to a wall for more bass risks a wall-bounce suckout in the midrange (roughly 200-500Hz depending on distance). Not perfectly time-aligned between tweeter and woofer (about 0.4ms delta), an inherent limitation of passive coincident drivers versus actively time-corrected designs. Some resonances appear in measurements, likely port-related. Minimum impedance around 6.4 ohms with EPDR near 3 ohms, so the reviewer recommends sticking with a 4-ohm-rated amplifier to be safe.
Full MoFi SourcePoint 10 review and specifications →
| Bass Extension (-10dB) | 38Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 56Hz (measured, Erin's Audio Corner) |
| Dimensions | 22.5"H x 14.5"W x 16.6"D (571.5 x 368.3 x 421.6 mm) |
| Drivers | 10" Paper-pulp Cone woofer, 1.25-inch soft-dome tweeter |
| Impedance | 8 ohms nominal, 6.4 ohms minimum (measured, Erin's Audio Corner) |
| Sensitivity | 88.2dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 3.25 |
| Spinorama Preference Score with Perfect Sub | 5.27 |
| Weight | 46.3 lbs (21.0 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- MoFi SourcePoint 10 vs Radiant Acoustics Clarity 6.2
- MoFi SourcePoint 10 vs Wharfedale Super Linton
- MoFi SourcePoint 10 vs Dynaudio Heritage Special
- MoFi SourcePoint 10 vs Ascend Acoustics CMT-340 SE2
- MoFi SourcePoint 10 vs Arendal 1528 Monitor 8
- MoFi SourcePoint 10 vs Wharfedale Linton 85
- MoFi SourcePoint 10 vs AsciLab F6Bs
- MoFi SourcePoint 10 vs Ascend Acoustics Sierra-LX
- See all 48 comparisons