Short answer: the MoFi SourcePoint 8. It ranks #17 of 130 bookshelf speakers by sound quality at $2594; the Perlisten A3m ranks #43 and costs $3000, so there is not much of a tradeoff to weigh.
What the MoFi SourcePoint 8 offers: 8” twin-drive concentric driver paired with a 1.25” soft dome tweeter, in a diffraction-reducing baffle design; rated 47Hz-30kHz. Notably more neutral and true-to-source than its sibling SourcePoint 10, which the reviewer found a bit too bright in the treble by comparison - measured about 4-5dB less high-frequency output. Excellent imaging: passed multiple stereo-panning and depth tests, including smooth continuous left-to-right pans without wobble and correct front-to-back layering of vocals versus percussion. Wide horizontal dispersion of about ±60°, broader than the reviewer expected from a coaxial design, and forgiving enough in placement that about 10° of toe-out variance and moving above or below the tweeter axis both still sound good. Excellent dynamic range and compression linearity - about 26dB of headroom up to 102dB/1m equivalent, with issues only appearing below about 60Hz. 8-ohm nominal impedance made it easy to drive on everything from a budget Denon AVR to a high-end Macintosh amplifier. No significant evidence of woofer-cone modulation distortion affecting the tweeter, even at 96dB/1m. Watch for: Like other coincident designs, produces diffraction dips around 4kHz and 7kHz when pointed directly on-axis; needs about 10-15° of toe-out to smooth those out. The rear-ported cabinet (two ports) means it can’t be placed too close to a wall without the bass becoming overblown - the reviewer settled on about 2 feet of clearance. F3 of 52Hz and F10 of 43Hz mean genuine deep bass tops out in the mid-40s Hz in-room - a subwoofer is still needed for true low-end extension. Harmonic distortion crosses the reviewer’s 3% threshold at 96dB (though it’s second-order and less audibly significant), and multitone distortion becomes noticeably more audible at that same output level. Vertical response doesn’t perfectly mirror horizontal, since the cabinet is a rectangle rather than a perfect square around the driver.
What the Perlisten A3m offers: Manufacturer data shows a narrow 1.8dB reference band, 0.305dB on-axis average absolute deviation, 0.457 listening-window smoothness, and a rated 111.4dB peak at 1m. Its preference score rises from 3.39 to 6.42 with a subwoofer. A sealed cabinet, two 8-inch carbon-fiber woofers, and a controlled tweeter waveguide make this a high-output monitor. Watch for: The low-quality vendor Spinorama data measures only 85.8Hz at -3dB, 74.1Hz at -6dB, and 55.7Hz at -12dB, conflicting with Perlisten’s much deeper in-room extension claim. A 3.70 sound-power directivity-index standard deviation and 0.295 predicted-in-room smoothness are merely average. It is large, heavy, 4-ohm nominal, and expensive at $3,000/pair.
Buy the MoFi SourcePoint 8. It ranks higher for sound quality than the Perlisten A3m and costs less, so the other one has nothing left to offer.
Still deciding? The full Passive Home rankings cover every ranked option.
Specifications Side By Side
| MoFi SourcePoint 8 | Perlisten A3m | |
|---|---|---|
| Price | $2594 per pair | $3,000 per pair |
| Ranked | #17 of 130 in Large Size Bookshelf Speakers | #43 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 43Hz (measured, Erin's Audio Corner) | approximately 61Hz (measured, spinorama.org) |
| Bass Extension (-3dB) | 52Hz (measured, Erin's Audio Corner) | 85.8Hz (measured, spinorama.org) |
| Dimensions | 18"H x 11.4"W x 13.2"D (457.2 x 289.6 x 335.3 mm) | 26.6 x 11.0 x 13.8 in each |
| Impedance | 8 ohms nominal (8 ohms minimum above 80Hz, measured, Erin's Audio Corner) | 4 ohms nominal; 3 ohms minimum |
| Sensitivity | 86.3dB (measured, Erin's Audio Corner) | 87.4dB at 2.83V/1m |
| Drivers | 8" woofer, 1.25-inch soft-dome tweeter | Two 8-inch carbon-fiber woofers; 35mm Teteron dome tweeter |
| Weight | 28 lbs (12.7 kg) each | - |
| Woofer Cabinet | ported, rear | - |
| Spinorama Preference Score | 4.39 | 3.39 |
| Spinorama Preference Score with Perfect Sub | 6.53 | 6.42 |
| Enclosure | - | Sealed |
| Maximum SPL | - | 111.4dB peak at 1m (manufacturer specified) |
Related Speaker Comparisons
How MoFi SourcePoint 8 compares with other leading options:
- MoFi SourcePoint 8 vs Perlisten S4b
- MoFi SourcePoint 8 vs KEF Reference 1 Meta
- MoFi SourcePoint 8 vs GR-Research NX-Studio
- MoFi SourcePoint 8 vs March Audio Sointuva AWG
- MoFi SourcePoint 8 vs AsciLab C6B
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
MoFi SourcePoint 8: $2594 per pair Crutchfield eBay
Pros: 8” twin-drive concentric driver paired with a 1.25” soft dome tweeter, in a diffraction-reducing baffle design; rated 47Hz-30kHz. Notably more neutral and true-to-source than its sibling SourcePoint 10, which the reviewer found a bit too bright in the treble by comparison - measured about 4-5dB less high-frequency output. Excellent imaging: passed multiple stereo-panning and depth tests, including smooth continuous left-to-right pans without wobble and correct front-to-back layering of vocals versus percussion. Wide horizontal dispersion of about ±60°, broader than the reviewer expected from a coaxial design, and forgiving enough in placement that about 10° of toe-out variance and moving above or below the tweeter axis both still sound good. Excellent dynamic range and compression linearity - about 26dB of headroom up to 102dB/1m equivalent, with issues only appearing below about 60Hz. 8-ohm nominal impedance made it easy to drive on everything from a budget Denon AVR to a high-end Macintosh amplifier. No significant evidence of woofer-cone modulation distortion affecting the tweeter, even at 96dB/1m. Measured bass extension of 52Hz (-3dB), with a measured sensitivity of 86.3dB.
Cons: Like other coincident designs, produces diffraction dips around 4kHz and 7kHz when pointed directly on-axis; needs about 10-15° of toe-out to smooth those out. The rear-ported cabinet (two ports) means it can’t be placed too close to a wall without the bass becoming overblown - the reviewer settled on about 2 feet of clearance. F3 of 52Hz and F10 of 43Hz mean genuine deep bass tops out in the mid-40s Hz in-room - a subwoofer is still needed for true low-end extension. Harmonic distortion crosses the reviewer’s 3% threshold at 96dB (though it’s second-order and less audibly significant), and multitone distortion becomes noticeably more audible at that same output level. Vertical response doesn’t perfectly mirror horizontal, since the cabinet is a rectangle rather than a perfect square around the driver.
Full MoFi SourcePoint 8 review and specifications →
| Bass Extension (-10dB) | 43Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 52Hz (measured, Erin's Audio Corner) |
| Dimensions | 18"H x 11.4"W x 13.2"D (457.2 x 289.6 x 335.3 mm) |
| Drivers | 8" woofer, 1.25-inch soft-dome tweeter |
| Impedance | 8 ohms nominal (8 ohms minimum above 80Hz, measured, Erin's Audio Corner) |
| Sensitivity | 86.3dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 4.39 |
| Spinorama Preference Score with Perfect Sub | 6.53 |
| Weight | 28 lbs (12.7 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: Why Do People Love the MoFi SourcePoint 8? More from Erin’s Audio Corner →
- Erin’s Audio Corner Website MoFi SourcePoint 8
- Erin’s Audio Corner: Upgrade Your Sound with These 6 Surprisingly Affordable Speakers!
- Erin’s Audio Corner: My Personal Favorite Speakers Under $2500
- Erin’s Audio Corner: My Top Picks of 2023: Must-Haves Under $3000
- GR-Research: Danny Tackles Andrews Jones: The Source Point 8! Spoiler Alert (It’s Really Good) More from GR-Research →
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- MoFi SourcePoint 8 vs Buchardt Audio E50
- MoFi SourcePoint 8 vs KEF R3
- MoFi SourcePoint 8 vs Epos ES14N
- MoFi SourcePoint 8 vs AsciLab F6Bs
- MoFi SourcePoint 8 vs Wharfedale Aura 2
- MoFi SourcePoint 8 vs Arendal 1528 Monitor 8
- MoFi SourcePoint 8 vs KEF Q Concerto Meta
- MoFi SourcePoint 8 vs Ascend Acoustics CMT-340 SE2
- See all 57 comparisons
Perlisten A3m: $3,000 per pair Perlisten Dealer Network eBay
Pros: Manufacturer data shows a narrow 1.8dB reference band, 0.305dB on-axis average absolute deviation, 0.457 listening-window smoothness, and a rated 111.4dB peak at 1m. Its preference score rises from 3.39 to 6.42 with a subwoofer. A sealed cabinet, two 8-inch carbon-fiber woofers, and a controlled tweeter waveguide make this a high-output monitor. Measured bass extension of 85.8Hz (-3dB).
Cons: The low-quality vendor Spinorama data measures only 85.8Hz at -3dB, 74.1Hz at -6dB, and 55.7Hz at -12dB, conflicting with Perlisten’s much deeper in-room extension claim. A 3.70 sound-power directivity-index standard deviation and 0.295 predicted-in-room smoothness are merely average. It is large, heavy, 4-ohm nominal, and expensive at $3,000/pair.
Full Perlisten A3m review and specifications →
| Bass Extension (-10dB) | approximately 61Hz (measured, spinorama.org) |
|---|---|
| Bass Extension (-3dB) | 85.8Hz (measured, spinorama.org) |
| Dimensions | 26.6 x 11.0 x 13.8 in each |
| Drivers | Two 8-inch carbon-fiber woofers; 35mm Teteron dome tweeter |
| Enclosure | Sealed |
| Impedance | 4 ohms nominal; 3 ohms minimum |
| Maximum SPL | 111.4dB peak at 1m (manufacturer specified) |
| Sensitivity | 87.4dB at 2.83V/1m |
| Spinorama Preference Score | 3.39 |
| Spinorama Preference Score with Perfect Sub | 6.42 |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Perlisten A3m vs ELAC Debut 3.0 DB63
- Perlisten A3m vs Aalto Speakers Aalto 3 Passive
- Perlisten A3m vs Emotiva Airmotiv XB2
- Perlisten A3m vs Ascend Acoustics Sierra-2EX V2
- Perlisten A3m vs Philharmonic BMR (v1)
- Perlisten A3m vs Ascend Acoustics Sierra-LX
- Perlisten A3m vs Wharfedale Linton 85
- Perlisten A3m vs ELAC DBR62
- See all 44 comparisons