Short answer: the PSB Alpha T20. Both are rated 3.9/5 for sound quality (#142 and #138 of 226 floorstanding speakers), and the PSB Alpha T20 costs $1,099 against $1,159.98 for the Klipsch RP-8000F II, and with sound quality even, the cheaper one is the better buy.
What the Klipsch RP-8000F II does well: Highest sensitivity of the RP II floorstander line (~92dB measured) and the best dynamics/compression behavior of the three under load: the cleanest at high output. The tradeoff: Mid-bass sounds lean despite the dual 8-inch woofers, and bass extension disappointed for its size: expected to reach 50Hz, didn’t get there in-room.
The PSB Alpha T20 is the deeper-bass option. Dual 5.25-inch floorstanding loudspeaker voiced by Paul Barton featuring textured polypropylene woofers and a 0.75-inch black anodized aluminum dome tweeter with front waveguide. Its bass reaches about 28Hz before falling 10dB, against 33Hz for the Klipsch RP-8000F II. The tradeoff: Rating estimated based on Alpha series sibling testing.
Buy the PSB Alpha T20. Both are rated the same for sound quality, and it costs $60.98 less than the Klipsch RP-8000F II.
About the ratings: the PSB Alpha T20’s rating is estimated from measured siblings and predecessors rather than its own measurements, with a likely range of 3.7 to 4.1, so this verdict could change once it is measured.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Klipsch RP-8000F II | PSB Alpha T20 | |
|---|---|---|
| Price | $1,159.98 per pair | $1,099.00 per pair |
| Ranked | #138 of 226 in Large Size Floorstanding Speakers | #142 of 226 in Large Size Floorstanding Speakers Estimated |
| Bass Extension (-10dB) | 33Hz (measured, Erin’s Audio Corner) | 28Hz (manufacturer specified) |
| Bass Extension (-3dB) | 67Hz (measured, Erin’s Audio Corner) | 36Hz (manufacturer specified) |
| Sensitivity | 92dB (2.83V/1m, measured by Erin’s Audio Corner) | 90dB (2.83V/1m, manufacturer specified) |
| Drivers | 1” titanium tweeter with 90x90 Tractrix horn, dual 8” cerametallic woofers | 0.75” (19mm) aluminum dome tweeter, 2 x 5.25” (133mm) textured polypropylene woofers |
| Weight | 61.3 lbs (27.8 kg) | 26.2 lbs (11.9 kg) each |
| Impedance | 8 ohms nominal (3.7 ohms minimum above 80Hz, measured by Erin’s Audio Corner) | 8 ohms nominal, 4 ohms minimum (manufacturer specified) |
| Frequency Response | 35Hz - 25kHz (+-3dB, Manufacturer specified) | 36Hz - 21kHz (±3dB, manufacturer specified) |
| Crossover Frequency | 1630Hz | - |
| Power Handling | 150W continuous, 600W peak | - |
| Dimensions | 43.1” x 10.8” x 18.3” (1095 x 275 x 464 mm) | 32.5”H x 6.7”W x 9.6”D (825 x 170 x 243 mm) |
| Woofer Cabinet | ported, rear | - |
| Spinorama Preference Score | 5.39 | - |
| Spinorama Preference Score with Perfect Sub | 7.12 | - |
| DIY Kit | No | No |
Related Speaker Comparisons
How Klipsch RP-8000F II compares with other leading options:
- Klipsch RP-8000F II vs KEF Blade Two Meta
- Klipsch RP-8000F II vs MoFi SourcePoint V10 Master Edition
- Klipsch RP-8000F II vs MoFi SourcePoint 888
- Klipsch RP-8000F II vs Revel F328Be
- Klipsch RP-8000F II vs Radiant Acoustics Clarity 66
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Klipsch RP-8000F II: $1,159.98 per pair Amazon eBay
Same family: the Klipsch RP-500M II (smaller bookshelf, rated 4/5), the Klipsch RP-600M II (larger bookshelf, rated 3.7/5), the Klipsch RP-5000F II (smaller floorstanding, ranked higher, rated 4/5), the Klipsch RP-6000F II (smaller floorstanding, ranked lower, rated 3.9/5), the Klipsch RP-8060FA II (larger floorstanding, ranked lower, estimated 3.8/5), the Klipsch RP-404C II (smallest center, rated 3.7/5), the Klipsch RP-500C II (center, rated 3.9/5), the Klipsch RP-504C II (largest center, rated 3.8/5), the Klipsch Reference Premiere RP-500SA II (smaller surround, estimated 3.5/5) and the Klipsch Reference Premiere RP-502S II (larger surround, estimated 3.5/5). See every Klipsch Reference Premiere generation.
Pros: Highest sensitivity of the RP II floorstander line (~92dB measured) and the best dynamics/compression behavior of the three under load: the cleanest at high output. Dual 8-inch woofers and the highest power handling in the line. Measured bass extension of 67Hz (-3dB), with a measured sensitivity of 92dB.
Cons: Mid-bass sounds lean despite the dual 8-inch woofers, and bass extension disappointed for its size: expected to reach 50Hz, didn’t get there in-room. Has its own edgy upper-mid bump (2-6kHz) that’s harder to EQ out than the other two models’ issues, since it stems from the vertical horn/woofer offset rather than simple tonal balance. The most placement-critical of the three, with the narrowest horizontal (~40-50 degrees) and vertical (+5/-10 degrees) dispersion.
Full Klipsch RP-8000F II review and specifications →
| Released | Jun 2022 (4 years ago) |
|---|---|
| Bass Extension (-10dB) | 33Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-3dB) | 67Hz (measured, Erin’s Audio Corner) |
| Crossover Frequency | 1630Hz |
| DIY Kit | No |
| Dimensions | 43.1” x 10.8” x 18.3” (1095 x 275 x 464 mm) |
| Drivers | 1” titanium tweeter with 90x90 Tractrix horn, dual 8” cerametallic woofers |
| Frequency Response | 35Hz - 25kHz (+-3dB, Manufacturer specified) |
| Impedance | 8 ohms nominal (3.7 ohms minimum above 80Hz, measured by Erin’s Audio Corner) |
| Power Handling | 150W continuous, 600W peak |
| Sensitivity | 92dB (2.83V/1m, measured by Erin’s Audio Corner) |
| Spinorama Preference Score | 5.39 |
| Spinorama Preference Score with Perfect Sub | 7.12 |
| Weight | 61.3 lbs (27.8 kg) |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Klipsch RP-8000F II vs Dynaudio Emit 30
- Klipsch RP-8000F II vs Klipsch RP-6000F II
- Klipsch RP-8000F II vs Klipsch RP-5000F II
- Klipsch RP-8000F II vs Definitive Technology BP-9020
- Klipsch RP-8000F II vs KLH Model Five
- Klipsch RP-8000F II vs SVS Ultra Evolution Pinnacle
- Klipsch RP-8000F II vs KEF Q11 Meta
- Klipsch RP-8000F II vs Polk T50
- See all 45 comparisons
PSB Alpha T20: $1,099.00 per pair Estimated Amazon eBay
Same family: the PSB Alpha P3 (smaller bookshelf, rated 3.3/5), the PSB Alpha P5 (larger bookshelf, rated 3.6/5) and the PSB Alpha C10 (center, estimated 3.4/5).
Pros: Dual 5.25-inch floorstanding loudspeaker voiced by Paul Barton featuring textured polypropylene woofers and a 0.75-inch black anodized aluminum dome tweeter with front waveguide. Yields clean listening-window balance, smooth directivity, and bass reach down to 36Hz in an accessible form factor.
Cons: Rating estimated based on Alpha series sibling testing. Lightweight cabinet construction displays slight resonance at high volume levels compared to heavier high-end towers.
Full PSB Alpha T20 review and specifications →
| Released | 2019 (7 years ago) |
|---|---|
| Bass Extension (-10dB) | 28Hz (manufacturer specified) |
| Bass Extension (-3dB) | 36Hz (manufacturer specified) |
| DIY Kit | No |
| Dimensions | 32.5”H x 6.7”W x 9.6”D (825 x 170 x 243 mm) |
| Drivers | 0.75” (19mm) aluminum dome tweeter, 2 x 5.25” (133mm) textured polypropylene woofers |
| Frequency Response | 36Hz - 21kHz (±3dB, manufacturer specified) |
| Impedance | 8 ohms nominal, 4 ohms minimum (manufacturer specified) |
| Sensitivity | 90dB (2.83V/1m, manufacturer specified) |
| Weight | 26.2 lbs (11.9 kg) each |
- Links
- Reviews, Comparisons and Sound Samples
- No independent measurement review is linked for this model; it is ranked from hands-on listening and comparison against similarly priced speakers.
- Head-to-Head Comparisons