Short answer: the Klipsch RP-8000F II. It ranks #138 of 228 floorstanding speakers by sound quality, rated 3.9/5, at $1,099; the KEF Q7 Meta ranks #177, rated 3.5/5, and costs $1,999.98, which makes this an easy call rather than a real tradeoff.
What the KEF Q7 Meta does well: A three-way tower with a coaxial driver array, twin woofers and low distortion down to deep bass. The tradeoff: 4 ohm nominal impedance with a 3.2 ohm minimum dip means it draws significant amplifier current, and the rear bass-reflex port requires at least 30-50cm of wall clearance.
The Klipsch RP-8000F II is the better-sounding option. A very easy to drive tower with twin 8 inch woofers that stays clean and composed at high home theater volumes. Watch for: Mid-bass sounds lean despite the dual 8-inch woofers, and bass extension disappointed for its size: expected to reach 50Hz, didn’t get there in-room.
Buy the Klipsch RP-8000F II. It is rated higher for sound quality than the KEF Q7 Meta and costs less, so it is the default pick unless a specific strength of the other one matters more to you.
About the ratings: the KEF Q7 Meta’s rating is estimated from measured siblings and predecessors rather than its own measurements, with a likely range of 3.3 to 3.7, so this verdict could change once it is measured.
Want more options? Browse the full Passive Home rankings.
A three-way tower with a coaxial driver array, twin woofers and low distortion down to deep bass.
A very easy to drive tower with twin 8 inch woofers that stays clean and composed at high home theater volumes.
Prices on this page were last checked November 5, 2026 at 10:30 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
Specifications Side By Side
| KEF Q7 Meta | Klipsch RP-8000F II | |
|---|---|---|
| Price | $1,999.98 per pair | $1,099.00 per pair |
| Ranked | #177 of 228 in Large Size Floorstanding Speakers Estimated | #138 of 228 in Large Size Floorstanding Speakers |
| Bass Extension (-3dB) | 46Hz (manufacturer specified) | 67Hz (measured, Erin’s Audio Corner) |
| Enclosure | ported, rear | - |
| Drivers | 0.75” vented aluminum dome with MAT tweeter, 4” aluminum midrange, dual 6.5” hybrid aluminum woofers | 1” titanium tweeter with 90x90 Tractrix horn, dual 8” cerametallic woofers |
| Frequency Response | 46Hz - 20kHz (±3dB) (manufacturer specified) | 35Hz - 25kHz (+-3dB, Manufacturer specified) |
| Sensitivity | 87dB (2.83V/1m, manufacturer specified) | 92dB (2.83V/1m, measured by Erin’s Audio Corner) |
| Impedance | 4 ohms nominal (3.2 ohms minimum, manufacturer specified) | 8 ohms nominal (3.7 ohms minimum above 80Hz, measured by Erin’s Audio Corner) |
| Dimensions | 39.4”H x 12.5”W x 12.4”D (1001 x 317 x 315 mm) | 43.1” x 10.8” x 18.3” (1095 x 275 x 464 mm) |
| Weight | 40.6 lbs (18.4 kg) each | 61.3 lbs (27.8 kg) |
| Cabinet Color | Satin Black, Satin White, Walnut | - |
| Country | United Kingdom | - |
| Bass Extension (-10dB) | - | 33Hz (measured, Erin’s Audio Corner) |
| Crossover Frequency | - | 1630Hz |
| Power Handling | - | 150W continuous, 600W peak |
| Woofer Cabinet | - | ported, rear |
| Spinorama Preference Score | - | 5.39 |
| Spinorama Preference Score with Perfect Sub | - | 7.12 |
| DIY Kit | - | No |
Related Speaker Comparisons
How Klipsch RP-8000F II compares with other leading options: