Short answer: the KEF LSX II LT. It ranks #27 of 58 powered bookshelf speakers by sound quality at $600; the Audioengine HD6 ranks #41 and costs $817.44, so there is not much of a tradeoff to weigh.
What the KEF LSX II LT offers: Coaxial (Uni-Q-style) driver keeps the tweeter centered in the midrange, giving wide and consistent dispersion both horizontally and vertically (about ±60° each) - a wide sweet spot for multiple seats or positions. The KEF Connect app provides genuinely useful DSP control: desk/wall boundary compensation, adjustable bass contour (standard/less/extra), treble trim, and subwoofer integration, letting you tune the sound to wherever it’s placed. Distortion at a moderate 86dB looks good for the speaker’s compact size. Tonal profile stays consistent from 0° to 30° off-axis, so side-seat listeners hear essentially the same balance as someone centered. Extensive connectivity for its size: HDMI, USB, optical, sub output, plus Wi-Fi/Bluetooth. Clearly outperformed the reviewer’s soundbars, including ones bundled with their own subwoofers, as a TV audio replacement. Watch for: Small drivers mean it’s SPL-limited: bass compression kicks in around 88-92dB/1m per speaker, and multitone distortion crosses the reviewer’s 3% threshold around 96dB - not intended for loud or large-room duty. F3 of 55Hz and F10 of 46Hz mean it loses much of its bass by around 50Hz; a subwoofer (controllable through the same app) is needed for real low end. Diffraction dips appear around 4-5kHz and again near 8kHz, likely tied to the tweeter housing or surround, giving a mild reduction in treble attack and sibilance. A possible port or enclosure resonance shows up around 800Hz in the rear-radiation measurements, though the reviewer wasn’t certain of the exact cause or whether it’s audible. No analog input on this LT variant, so a turntable can’t be connected directly - only the pricier standard LSX II model includes one.
What the Audioengine HD6 offers: Watch for: A bit of an accentuated treble and bass. Slight dip in the midrange.
Buy the KEF LSX II LT. It ranks higher for sound quality than the Audioengine HD6 and costs less, so there is no real case for the other one.
Specifications Side By Side
| KEF LSX II LT | Audioengine HD6 | |
|---|---|---|
| Price | $600.00 | $817.44 |
| Ranked | #27 of 58 in Medium Size Powered Bookshelf Speakers | #41 of 58 in Medium Size Powered Bookshelf Speakers |
| Dimensions | 9.5"H x 6.1"W x 7.1"D (241.3 x 154.9 x 180.3 mm) | 11.7"H x 7.2"W x 10"D (298.4 x 184.1 x 254 mm) |
| Inputs | Wifi, USB-C, HDMI, Optical, Bluetooth | Bluetooth, Aux, RCA Input, Digital Optical |
| Outputs | RCA Subwoofer | RCA Output |
| Drivers | 115mm (4.5in.) magnesium/aluminium alloy cone woofer, 19mm (0.75in.) aluminium dome tweeter | 5.5" (140mm) woofer |
| Weight | 15 lbs / 6.8 kg | 17.4 lbs / 7.9 kg |
| App | No | No |
| Bluetooth | No | No |
| EQ | No | No |
| Output Power | 100w RMS Per Speaker | 50w RMS Per Speaker |
| Bass Extension (-3dB) | 55Hz (measured, Erin’s Audio Corner) | - |
| Bass Extension (-10dB) | 46Hz (measured, Erin’s Audio Corner) | - |
| Sensitivity | 84dB (measured at 0.3V/1m, Erin’s Audio Corner) | - |
| Frequency Response | - | 45Hz-40KHz (-3dB) (Manufacturer specified) |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Vanatoo Transparent One Encore Plus vs Klipsch The Fives
- Klipsch The Fives vs Kali Audio IN-UNF
- IK Multimedia iLoud MTM MKII vs Klipsch The Fives
- Neumann KH80 DSP vs Audioengine HD6
- Edifier S2000MKIII vs Audioengine HD6
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
KEF LSX II LT: $600.00 Amazon eBay
Pros: Coaxial (Uni-Q-style) driver keeps the tweeter centered in the midrange, giving wide and consistent dispersion both horizontally and vertically (about ±60° each) - a wide sweet spot for multiple seats or positions. The KEF Connect app provides genuinely useful DSP control: desk/wall boundary compensation, adjustable bass contour (standard/less/extra), treble trim, and subwoofer integration, letting you tune the sound to wherever it’s placed. Distortion at a moderate 86dB looks good for the speaker’s compact size. Tonal profile stays consistent from 0° to 30° off-axis, so side-seat listeners hear essentially the same balance as someone centered. Extensive connectivity for its size: HDMI, USB, optical, sub output, plus Wi-Fi/Bluetooth. Clearly outperformed the reviewer’s soundbars, including ones bundled with their own subwoofers, as a TV audio replacement.
Cons: Small drivers mean it’s SPL-limited: bass compression kicks in around 88-92dB/1m per speaker, and multitone distortion crosses the reviewer’s 3% threshold around 96dB - not intended for loud or large-room duty. F3 of 55Hz and F10 of 46Hz mean it loses much of its bass by around 50Hz; a subwoofer (controllable through the same app) is needed for real low end. Diffraction dips appear around 4-5kHz and again near 8kHz, likely tied to the tweeter housing or surround, giving a mild reduction in treble attack and sibilance. A possible port or enclosure resonance shows up around 800Hz in the rear-radiation measurements, though the reviewer wasn’t certain of the exact cause or whether it’s audible. No analog input on this LT variant, so a turntable can’t be connected directly - only the pricier standard LSX II model includes one.
Full KEF LSX II LT review and specifications →
| App | No |
|---|---|
| Bass Extension (-10dB) | 46Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 55Hz (measured, Erin's Audio Corner) |
| Bluetooth | No |
| Dimensions | 9.5"H x 6.1"W x 7.1"D (241.3 x 154.9 x 180.3 mm) |
| Drivers | 115mm (4.5in.) magnesium/aluminium alloy cone woofer, 19mm (0.75in.) aluminium dome tweeter |
| EQ | No |
| Inputs | Wifi, USB-C, HDMI, Optical, Bluetooth |
| Output Power | 100w RMS Per Speaker |
| Outputs | RCA Subwoofer |
| Sensitivity | 84dB (measured at 0.3V/1m, Erin's Audio Corner) |
| Weight | 15 lbs / 6.8 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- KEF LSX II LT vs Dayton Audio M4
- KEF LSX II LT vs Edifier S2000MKIII
- KEF LSX II LT vs KRK Classic 5
- KEF LSX II LT vs Edifier MR4
- KEF LSX II LT vs JBL 705P
- KEF LSX II LT vs Vanatoo Transparent One Encore Plus
- KEF LSX II LT vs IK Multimedia iLoud MTM
- KEF LSX II LT vs Topping MA4
- See all 39 comparisons
Audioengine HD6: $817.44 Amazon eBay
Cons: A bit of an accentuated treble and bass. Slight dip in the midrange.
Full Audioengine HD6 review and specifications →
| App | No |
|---|---|
| Bluetooth | No |
| Dimensions | 11.7"H x 7.2"W x 10"D (298.4 x 184.1 x 254 mm) |
| Drivers | 5.5" (140mm) woofer |
| EQ | No |
| Frequency Response | 45Hz-40KHz (-3dB) (Manufacturer specified) |
| Inputs | Bluetooth, Aux, RCA Input, Digital Optical |
| Output Power | 50w RMS Per Speaker |
| Outputs | RCA Output |
| Weight | 17.4 lbs / 7.9 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Audioengine HD6 vs Klipsch The Fives
- Audioengine HD6 vs Pioneer DJ VM-50
- Audioengine HD6 vs Vanatoo Transparent One Encore Plus
- Audioengine HD6 vs Kali Audio IN-UNF
- Audioengine HD6 vs KRK Classic 5
- Audioengine HD6 vs Edifier S2000MKIII
- Audioengine HD6 vs Dayton Audio M4
- Audioengine HD6 vs IK Multimedia iLoud MTM MKII
- See all 13 comparisons