Short answer: the Genelec 8331A for better sound quality, the KEF LSX II LT for the lower price. The Genelec 8331A ranks #1 of 60 powered bookshelf speakers at $5750. The KEF LSX II LT ranks #27 at $600, $5150 cheaper.
What the KEF LSX II LT offers: Coaxial (Uni-Q-style) driver keeps the tweeter centered in the midrange, giving wide and consistent dispersion both horizontally and vertically (about ±60° each) - a wide sweet spot for multiple seats or positions. The KEF Connect app provides genuinely useful DSP control: desk/wall boundary compensation, adjustable bass contour (standard/less/extra), treble trim, and subwoofer integration, letting you tune the sound to wherever it’s placed. Distortion at a moderate 86dB looks good for the speaker’s compact size. Tonal profile stays consistent from 0° to 30° off-axis, so side-seat listeners hear essentially the same balance as someone centered. Extensive connectivity for its size: HDMI, USB, optical, sub output, plus Wi-Fi/Bluetooth. Clearly outperformed the reviewer’s soundbars, including ones bundled with their own subwoofers, as a TV audio replacement. Watch for: Small drivers mean it’s SPL-limited: bass compression kicks in around 88-92dB/1m per speaker, and multitone distortion crosses the reviewer’s 3% threshold around 96dB - not intended for loud or large-room duty. F3 of 55Hz and F10 of 46Hz mean it loses much of its bass by around 50Hz; a subwoofer (controllable through the same app) is needed for real low end. Diffraction dips appear around 4-5kHz and again near 8kHz, likely tied to the tweeter housing or surround, giving a mild reduction in treble attack and sibilance. A possible port or enclosure resonance shows up around 800Hz in the rear-radiation measurements, though the reviewer wasn’t certain of the exact cause or whether it’s audible. No analog input on this LT variant, so a turntable can’t be connected directly - only the pricier standard LSX II model includes one.
What the Genelec 8331A offers: A true compact point source: the coaxial mid/tweeter and acoustically concealed opposed woofers produce exceptionally uniform directivity, superb nearfield summation and pinpoint imaging. Erin measured F3 at 49Hz and F10 at 39Hz, heard useful 40Hz in-room extension, and reached 100dB at 3m before protection activated. Response is highly neutral, distortion is low, and GLM provides calibrated level, delay and room-response correction. The die-cast aluminum waveguide/enclosure is both structurally inert and nearly diffraction-free. Watch for: At $4,500/pair it is expensive for a monitor whose protection circuit mutes near its limit rather than allowing short-term overload; larger rooms and bass-heavy playback still benefit from a subwoofer. GLM calibration requires separate network hardware, and connectivity is studio-centric—analog/AES XLR with no consumer streaming. The compact dual racetrack woofers cannot match larger Genelec Ones for deep-bass headroom, and passive sensitivity is not applicable because all filtering and amplification are internal.
Buy the KEF LSX II LT if the price matters more than sound quality. Buy the Genelec 8331A if sound quality matters more than the price.
Specifications Side By Side
| KEF LSX II LT | Genelec 8331A | |
|---|---|---|
| Price | $600.00 | $5750 |
| Ranked | #27 of 60 in Medium Size Powered Bookshelf Speakers | #1 of 60 in Medium Size Powered Bookshelf Speakers |
| Dimensions | 9.5"H x 6.1"W x 7.1"D (241.3 x 154.9 x 180.3 mm) | 12"H x 7.4"W x 8.3"D (305 x 189 x 212 mm) |
| Inputs | Wifi, USB-C, HDMI, Optical, Bluetooth | - |
| Outputs | RCA Subwoofer | - |
| Drivers | 115mm (4.5in.) magnesium/aluminium alloy cone woofer, 19mm (0.75in.) aluminium dome tweeter | Dual 130x65mm woofers; 90mm coaxial mid; 19mm tweeter |
| Weight | 15 lbs / 6.8 kg | 14.8 lbs / 6.7kg each |
| App | No | - |
| Bluetooth | No | - |
| EQ | No | - |
| Output Power | 100w RMS Per Speaker | - |
| Bass Extension (-3dB) | 55Hz (measured, Erin’s Audio Corner) | 49Hz (measured, Erin’s Audio Corner) |
| Bass Extension (-10dB) | 46Hz (measured, Erin’s Audio Corner) | 39Hz (measured, Erin’s Audio Corner) |
| Sensitivity | 84dB (measured at 0.3V/1m, Erin’s Audio Corner) | Not applicable (active DSP loudspeaker) |
| Maximum Output | - | 100dB at 3m before protection (measured, Erin’s Audio Corner) |
| Amplification | - | 72W LF + 36W MF + 36W HF |
Related Speaker Comparisons
More useful head-to-heads from the same speaker class:
- Yamaha HS5 vs Reflector Audio Square Two
- Neumann KH120 MKII vs Kali Audio SM-5
- Neumann KH120 MKII vs Genelec 8330A
- Edifier S1000W vs Genelec 8331A
- Genelec 8331A vs Neumann KH80 DSP
Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
KEF LSX II LT: $600.00 Amazon eBay
Pros: Coaxial (Uni-Q-style) driver keeps the tweeter centered in the midrange, giving wide and consistent dispersion both horizontally and vertically (about ±60° each) - a wide sweet spot for multiple seats or positions. The KEF Connect app provides genuinely useful DSP control: desk/wall boundary compensation, adjustable bass contour (standard/less/extra), treble trim, and subwoofer integration, letting you tune the sound to wherever it’s placed. Distortion at a moderate 86dB looks good for the speaker’s compact size. Tonal profile stays consistent from 0° to 30° off-axis, so side-seat listeners hear essentially the same balance as someone centered. Extensive connectivity for its size: HDMI, USB, optical, sub output, plus Wi-Fi/Bluetooth. Clearly outperformed the reviewer’s soundbars, including ones bundled with their own subwoofers, as a TV audio replacement.
Cons: Small drivers mean it’s SPL-limited: bass compression kicks in around 88-92dB/1m per speaker, and multitone distortion crosses the reviewer’s 3% threshold around 96dB - not intended for loud or large-room duty. F3 of 55Hz and F10 of 46Hz mean it loses much of its bass by around 50Hz; a subwoofer (controllable through the same app) is needed for real low end. Diffraction dips appear around 4-5kHz and again near 8kHz, likely tied to the tweeter housing or surround, giving a mild reduction in treble attack and sibilance. A possible port or enclosure resonance shows up around 800Hz in the rear-radiation measurements, though the reviewer wasn’t certain of the exact cause or whether it’s audible. No analog input on this LT variant, so a turntable can’t be connected directly - only the pricier standard LSX II model includes one.
Full KEF LSX II LT review and specifications →
| App | No |
|---|---|
| Bass Extension (-10dB) | 46Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 55Hz (measured, Erin's Audio Corner) |
| Bluetooth | No |
| Dimensions | 9.5"H x 6.1"W x 7.1"D (241.3 x 154.9 x 180.3 mm) |
| Drivers | 115mm (4.5in.) magnesium/aluminium alloy cone woofer, 19mm (0.75in.) aluminium dome tweeter |
| EQ | No |
| Inputs | Wifi, USB-C, HDMI, Optical, Bluetooth |
| Output Power | 100w RMS Per Speaker |
| Outputs | RCA Subwoofer |
| Sensitivity | 84dB (measured at 0.3V/1m, Erin's Audio Corner) |
| Weight | 15 lbs / 6.8 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- KEF LSX II LT vs Dayton Audio M4
- KEF LSX II LT vs Edifier S2000MKIII
- KEF LSX II LT vs KRK Classic 5
- KEF LSX II LT vs Edifier MR4
- KEF LSX II LT vs JBL 705P
- KEF LSX II LT vs Vanatoo Transparent One Encore Plus
- KEF LSX II LT vs IK Multimedia iLoud MTM
- KEF LSX II LT vs Topping MA4
- See all 47 comparisons
Genelec 8331A: $5750 Bhphotovideo eBay
Pros: A true compact point source: the coaxial mid/tweeter and acoustically concealed opposed woofers produce exceptionally uniform directivity, superb nearfield summation and pinpoint imaging. Erin measured F3 at 49Hz and F10 at 39Hz, heard useful 40Hz in-room extension, and reached 100dB at 3m before protection activated. Response is highly neutral, distortion is low, and GLM provides calibrated level, delay and room-response correction. The die-cast aluminum waveguide/enclosure is both structurally inert and nearly diffraction-free.
Cons: At $4,500/pair it is expensive for a monitor whose protection circuit mutes near its limit rather than allowing short-term overload; larger rooms and bass-heavy playback still benefit from a subwoofer. GLM calibration requires separate network hardware, and connectivity is studio-centric—analog/AES XLR with no consumer streaming. The compact dual racetrack woofers cannot match larger Genelec Ones for deep-bass headroom, and passive sensitivity is not applicable because all filtering and amplification are internal.
Full Genelec 8331A review and specifications →
| Amplification | 72W LF + 36W MF + 36W HF |
|---|---|
| Bass Extension (-10dB) | 39Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 49Hz (measured, Erin's Audio Corner) |
| Dimensions | 12"H x 7.4"W x 8.3"D (305 x 189 x 212 mm) |
| Drivers | Dual 130x65mm woofers; 90mm coaxial mid; 19mm tweeter |
| Maximum Output | 100dB at 3m before protection (measured, Erin's Audio Corner) |
| Sensitivity | Not applicable (active DSP loudspeaker) |
| Weight | 14.8 lbs / 6.7kg each |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons