JBL PRX915 vs RCF ART 935-A

Last updated: September 7, 2026

Short answer: choose between the JBL PRX915 and RCF ART 935-A for the deployment, not from the automatic ranking alone. Their driver format, power requirements, coverage, bass reach, output capability, and control features determine which is the more practical PA for a particular room or system.

The case for the JBL PRX915. High-quality vendor data shows a 4.02 ideal-subwoofer preference score with 51Hz measured extension, backed by JBL’s extensive service network and 12-band parametric EQ with dbx DriveRack feedback suppression carried over from the PRX912.

The case for the RCF ART 935-A. The bigger-voice-coil compression driver, 133dB claimed peak and broad 100° x 60° coverage mirror the well-regarded ART 932-A’s design in a 15-inch cabinet. At 24.2kg it stays manageable for a box this size.

Important trade-offs. Its measured preference trails the 12-inch PRX912, and at 24.1kg it is meaningfully heavier to carry to a gig than the smaller model. The low-quality vendor measurement is truncated and cannot generate a preference score, so its tonal position relies on published engineering and its 12-inch sibling’s reputation rather than a confirmed result.

Buy the JBL PRX915 when its stated format, coverage, and system features fit the job better.

Buy the RCF ART 935-A when its stated output, control, and deployment strengths better match the system.

JBL PRX915 vs RCF ART 935-A

Specifications Side By Side

JBL PRX915 RCF ART 935-A
Price$1,099.00$1,499.00
Ranked#8 of 29 in 15-Inch Two-Way Powered PA Speakers#10 of 29 in 15-Inch Two-Way Powered PA Speakers
ConfigurationActive 2-way bass-reflex PA speakerActive 2-way bass-reflex PA speaker
Drivers15" woofer, 1.5" compression driver15" woofer, 1.4" exit/3" diaphragm compression driver
Frequency Response48Hz - 19kHz (-10dB, manufacturer specified)45Hz - 20kHz (manufacturer specified)
Dimensions28.2"H x 18.3"W x 15.1"D (717 x 465 x 383 mm)28.2"H x 16.3"W x 16.1"D (717 x 415 x 410 mm)
Maximum SPL133dB peak (manufacturer specified)133dB peak (manufacturer specified)
Inputs2 x XLR/TRS combo, 3.5mm aux; 2 x XLR thru and XLR mix outputsXLR and 1/4-inch jack input; XLR output
Amplifier Power2000W peak / 1000W RMS2100W peak (1400W LF + 700W HF)
Crossover Frequency1920Hz800Hz
Cabinet MaterialPolypropylene/talc compositePP composite
Rigging6 x M10 suspension points; dual 36mm pole socketsM10 inserts; 35mm pole mount
Coverage90° x 50°100° x 60°
Bass Extension (-3dB)58Hz (measured, vendor Spinorama data)54.5Hz (measured, vendor Spinorama data)
DSPYes, 12-band parametric EQ and dbx DriveRackYes, FiRPHASE and Bass Motion Control
BluetoothYes, control via JBL Pro Connect appNo
Weight53.1 lbs / 24.1 kg54.2 lbs / 24.6 kg

A few more comparisons worth a look in the same class:

Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

JBL PRX915: $1,099.00 Amazon B&H Photo Video Guitar Center eBay

JBL PRX915 ranking card

Pros: High-quality vendor data shows a 4.02 ideal-subwoofer preference score with 51Hz measured extension, backed by JBL’s extensive service network and 12-band parametric EQ with dbx DriveRack feedback suppression carried over from the PRX912.

Cons: Its measured preference trails the 12-inch PRX912, and at 24.1kg it is meaningfully heavier to carry to a gig than the smaller model.

Amplifier Power2000W peak / 1000W RMS
Bass Extension (-3dB)58Hz (measured, vendor Spinorama data)
BluetoothYes, control via JBL Pro Connect app
Cabinet MaterialPolypropylene/talc composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage90° x 50°
Crossover Frequency1920Hz
DSPYes, 12-band parametric EQ and dbx DriveRack
Dimensions28.2"H x 18.3"W x 15.1"D (717 x 465 x 383 mm)
Drivers15" woofer, 1.5" compression driver
Frequency Response48Hz - 19kHz (-10dB, manufacturer specified)
Inputs2 x XLR/TRS combo, 3.5mm aux; 2 x XLR thru and XLR mix outputs
Maximum SPL133dB peak (manufacturer specified)
Rigging6 x M10 suspension points; dual 36mm pole sockets
Weight53.1 lbs / 24.1 kg

RCF ART 935-A: $1,499.00 Amazon B&H Photo Video Guitar Center eBay

RCF ART 935-A ranking card

Pros: The bigger-voice-coil compression driver, 133dB claimed peak and broad 100° x 60° coverage mirror the well-regarded ART 932-A’s design in a 15-inch cabinet. At 24.2kg it stays manageable for a box this size.

Cons: The low-quality vendor measurement is truncated and cannot generate a preference score, so its tonal position relies on published engineering and its 12-inch sibling’s reputation rather than a confirmed result.

Amplifier Power2100W peak (1400W LF + 700W HF)
Bass Extension (-3dB)54.5Hz (measured, vendor Spinorama data)
BluetoothNo
Cabinet MaterialPP composite
ConfigurationActive 2-way bass-reflex PA speaker
Coverage100° x 60°
Crossover Frequency800Hz
DSPYes, FiRPHASE and Bass Motion Control
Dimensions28.2"H x 16.3"W x 16.1"D (717 x 415 x 410 mm)
Drivers15" woofer, 1.4" exit/3" diaphragm compression driver
Frequency Response45Hz - 20kHz (manufacturer specified)
InputsXLR and 1/4-inch jack input; XLR output
Maximum SPL133dB peak (manufacturer specified)
RiggingM10 inserts; 35mm pole mount
Weight54.2 lbs / 24.6 kg