Short answer: the FiiO FH3. It ranks #47 of 68 in-ear headphones by sound quality (rated 3.3/5) at $119.99 and is still sold new; the Jabra Elite Active 65t ranks #60 (rated 2.7/5) and is discontinued, so it is only an option used.
The FiiO FH3 is the better-sounding option. Bass and sub-bass sit within about 1 dB above the Harman target, giving kick drums and bass guitar a full, warm foundation without bloat. The tradeoff: The 3 to 6 kHz presence region sits about 5.7 dB below target, with a dip of 7.4 dB near 6.5 kHz, so vocals and cymbals lose bite and detail.
What the Jabra Elite Active 65t does well: A true wireless design with an IP56 rating gives dust and sweat resistance suited to workouts. Watch for: Only the SBC codec is supported, so there is no higher quality Bluetooth option.
Buy the FiiO FH3. It is rated higher for sound quality and still sold new, while the Jabra Elite Active 65t is discontinued.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| FiiO FH3 | Jabra Elite Active 65t | |
|---|---|---|
| Price | $119.99 | $156.45 Discontinued |
| Ranked | #47 of 68 in In-Ear Headphones | #60 of 68 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Harman Preference Score | 65 (measured by HypetheSonics, via AutoEQ) | 58 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 2.59 dB standard deviation | 3.41 dB standard deviation |
| Tonal Tilt | -0.86 (negative is warmer, positive brighter) | -0.49 (negative is warmer, positive brighter) |
| Connection | Wired | True wireless |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) | - |
| Drivers | 1 x 10mm dynamic + 2 x balanced armature | 1 x 6mm |
| Impedance | 24 ohms | - |
| Sensitivity | 114 dB/mW | - |
| Weight | 0 lbs (7.3 g) per earbud | 0 lbs (6.5 g) per earbud |
| Frequency Response | 10Hz - 40kHz (Manufacturer specified) | - |
| Back | Closed | Closed |
| Active Noise Cancelling | - | No |
| Battery Life | - | 5 hours (15 with case, Manufacturer specified) |
| Bluetooth Version | - | 5.0 |
| Bluetooth Codecs | - | SBC |
| Built-in Microphone | - | Yes |
| IP Rating | - | IP56 |
Related Headphone Comparisons
How FiiO FH3 compares with other leading options:
- Sennheiser Momentum True Wireless 3 vs FiiO FH3
- Jabra Elite Active 65t vs 1MORE Quad Driver
- Shure SE215 vs Jabra Elite Active 65t
- Jabra Elite Active 65t vs Sennheiser Momentum True Wireless 2
- iBasso IT01S vs Sennheiser Momentum True Wireless 3
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
FiiO FH3: $119.99 Amazon eBay
Pros: Bass and sub-bass sit within about 1 dB above the Harman target, giving kick drums and bass guitar a full, warm foundation without bloat. The hybrid design pairs a 10mm dynamic driver with two balanced armatures, and 114 dB/mW sensitivity at 24 ohms means a phone runs it easily. A preference score of 65 suits listeners who like a warm, bassy tilt.
Cons: The 3 to 6 kHz presence region sits about 5.7 dB below target, with a dip of 7.4 dB near 6.5 kHz, so vocals and cymbals lose bite and detail. Treble from 6 to 10 kHz is also about 2.2 dB low, which makes the sound dark and a little veiled. The KZ PR1 has a higher rating.
Full FiiO FH3 review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.59 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x 10mm dynamic + 2 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 65 (measured by HypetheSonics, via AutoEQ) |
| Impedance | 24 ohms |
| Sensitivity | 114 dB/mW |
| Tonal Tilt | -0.86 (negative is warmer, positive brighter) |
| Weight | 0 lbs (7.3 g) per earbud |
EQ preset to match the Harman target
Set a preamp of -4.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -4.0 dB | 0.70 |
| Peak | 4,061 Hz | +4.3 dB | 1.02 |
| Peak | 178 Hz | -2.5 dB | 1.19 |
| Peak | 1,183 Hz | -3.9 dB | 2.64 |
| Peak | 60 Hz | +2.7 dB | 0.83 |
| High shelf | 10,000 Hz | -0.6 dB | 0.70 |
| Peak | 545 Hz | +1.1 dB | 2.57 |
| Peak | 2,365 Hz | -2.4 dB | 4.99 |
| Peak | 6,488 Hz | +2.3 dB | 6.00 |
| Peak | 2,972 Hz | +1.8 dB | 5.25 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Jabra Elite Active 65t: $156.45 Discontinued Amazon eBay
Pros: A true wireless design with an IP56 rating gives dust and sweat resistance suited to workouts. Battery life is 5 hours per charge and 15 hours with the case, and the earbuds weigh only 6.5 g each. Bluetooth 5.0 and a built-in microphone cover calls and everyday listening.
Cons: Only the SBC codec is supported, so there is no higher quality Bluetooth option. There is no active noise cancelling, and Crinacle’s measurement gives a preference score of 58 with a 3.41 dB deviation from target, so the tuning is uneven. The Shure SE215 and FiiO FH3 are rated higher and cheaper, though both are wired. Discontinued.
Full Jabra Elite Active 65t review and specifications →
| Released | Jul 2018 (8 years ago) |
|---|---|
| Active Noise Cancelling | No |
| Back | Closed |
| Battery Life | 5 hours (15 with case, Manufacturer specified) |
| Bluetooth Codecs | SBC |
| Bluetooth Version | 5.0 |
| Built-in Microphone | Yes |
| Connection | True wireless |
| Deviation From Target | 3.41 dB standard deviation |
| Drivers | 1 x 6mm |
| Form Factor | In-ear |
| Harman Preference Score | 58 (measured by crinacle, via AutoEQ) |
| IP Rating | IP56 |
| Tonal Tilt | -0.49 (negative is warmer, positive brighter) |
| Weight | 0 lbs (6.5 g) per earbud |
EQ preset to match the Harman target
Set a preamp of -6.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +16.6 dB | 0.70 |
| Peak | 49 Hz | -16.0 dB | 0.34 |
| Peak | 5,403 Hz | +4.1 dB | 0.56 |
| Peak | 839 Hz | +2.4 dB | 1.86 |
| Peak | 8,608 Hz | -3.4 dB | 3.08 |
| High shelf | 10,000 Hz | +6.9 dB | 0.70 |
| Peak | 10,000 Hz | -3.1 dB | 1.06 |
| Peak | 5,115 Hz | -1.1 dB | 5.14 |
| Peak | 3,623 Hz | +1.0 dB | 3.53 |
| Peak | 6,391 Hz | +2.1 dB | 6.00 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons