Short answer: the FiiO FH3, if you are buying new. The Sennheiser Momentum True Wireless 3 ranks higher than it (#44 vs #47 of 68 in-ear headphones, 3.4/5 vs 3.3/5) but is discontinued, so only consider it used; the FiiO FH3 is still sold new at $119.99. The Sennheiser Momentum True Wireless 3’s replacement, the Sennheiser MOMENTUM True Wireless 4, is rated 3.3/5 at $249.95.
What the Sennheiser Momentum True Wireless 3 does well: Active noise cancelling, Bluetooth 5.2 and aptX Adaptive support (alongside SBC, AAC and aptX) add real convenience, and battery life is 7 hours per charge with up to 28 hours using the case. The catch: Presence between 3 and 6 kHz is 6.9 dB under target with a 7.6 dB dip near 4.4 kHz, so vocals, snare and guitar edges sound distant and veiled.
The case for the FiiO FH3: Bass and sub-bass sit within about 1 dB above the Harman target, giving kick drums and bass guitar a full, warm foundation without bloat. The tradeoff: The 3 to 6 kHz presence region sits about 5.7 dB below target, with a dip of 7.4 dB near 6.5 kHz, so vocals and cymbals lose bite and detail.
Buy the FiiO FH3 new; the Sennheiser Momentum True Wireless 3 is no longer sold new, so it only makes sense as a used find.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| Sennheiser Momentum True Wireless 3 | FiiO FH3 | |
|---|---|---|
| Price | $111.99 Discontinued | $119.99 |
| Ranked | #44 of 68 in In-Ear Headphones | #47 of 68 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Harman Preference Score | 66 (measured by oratory1990, via AutoEQ) | 65 (measured by HypetheSonics, via AutoEQ) |
| Deviation From Target | 2.59 dB standard deviation | 2.59 dB standard deviation |
| Tonal Tilt | -0.85 (negative is warmer, positive brighter) | -0.86 (negative is warmer, positive brighter) |
| Connection | True wireless | Wired |
| Driver Type | Dynamic | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x 7mm dynamic | 1 x 10mm dynamic + 2 x balanced armature |
| Sensitivity | 107 dB SPL (1 kHz / 1 mW) | 114 dB/mW |
| Weight | 0 lbs (5.8 g) per earbud | 0 lbs (7.3 g) per earbud |
| Frequency Response | 5Hz - 21kHz (Manufacturer specified) | 10Hz - 40kHz (Manufacturer specified) |
| Active Noise Cancelling | Yes | - |
| Battery Life | 7 hours (28 with case, Manufacturer specified) | - |
| Bluetooth Version | 5.2 | - |
| Bluetooth Codecs | SBC, AAC, aptX, aptX Adaptive | - |
| Built-in Microphone | Yes | - |
| IP Rating | IPX4 | - |
| Back | Closed | Closed |
| Impedance | - | 24 ohms |
Related Headphone Comparisons
More top alternatives to Sennheiser Momentum True Wireless 3:
- iBasso IT01S vs Sennheiser Momentum True Wireless 3
- Sennheiser Momentum True Wireless 3 vs Sennheiser Momentum True Wireless 2
- FiiO FH3 vs Jabra Elite Active 65t
- Sennheiser MOMENTUM True Wireless 4 vs Etymotic ER4XR
- Sennheiser MOMENTUM True Wireless 4 vs FiiO FH7S
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Sennheiser Momentum True Wireless 3: $111.99 Discontinued Amazon eBay
Newer model: the Sennheiser MOMENTUM True Wireless 4, ranked lower, rated 3.3/5, released Feb 2024. It adds LC3. See every Sennheiser Momentum True Wireless generation.
Pros: Active noise cancelling, Bluetooth 5.2 and aptX Adaptive support (alongside SBC, AAC and aptX) add real convenience, and battery life is 7 hours per charge with up to 28 hours using the case. At 5.8 g per earbud with an IPX4 rating, it handles workouts and light rain. Oratory1990’s measurement shows bass and sub-bass within 1 dB of target, giving a clean, warm foundation that suits warm and bassy tastes.
Cons: Presence between 3 and 6 kHz is 6.9 dB under target with a 7.6 dB dip near 4.4 kHz, so vocals, snare and guitar edges sound distant and veiled. Air above 10 kHz runs 5.4 dB hot, with a peak of 4.9 dB near 10.5 kHz, which adds a hissy edge on top of the recessed mids. The preference score of 66 and deviation of 2.59 dB confirm the response sits well off the target. The KZ PR1 is rated higher at a similar cost, though it lacks wireless and ANC. Discontinued.
Full Sennheiser Momentum True Wireless 3 review and specifications →
| Released | Apr 2022 (4 years ago) |
|---|---|
| Active Noise Cancelling | Yes |
| Back | Closed |
| Battery Life | 7 hours (28 with case, Manufacturer specified) |
| Bluetooth Codecs | SBC, AAC, aptX, aptX Adaptive |
| Bluetooth Version | 5.2 |
| Built-in Microphone | Yes |
| Connection | True wireless |
| Deviation From Target | 2.59 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 7mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 5Hz - 21kHz (Manufacturer specified) |
| Harman Preference Score | 66 (measured by oratory1990, via AutoEQ) |
| IP Rating | IPX4 |
| Sensitivity | 107 dB SPL (1 kHz / 1 mW) |
| Tonal Tilt | -0.85 (negative is warmer, positive brighter) |
| Weight | 0 lbs (5.8 g) per earbud |
EQ preset to match the Harman target
Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -2.6 dB | 0.70 |
| Peak | 4,231 Hz | +5.9 dB | 1.39 |
| Peak | 209 Hz | -2.2 dB | 0.78 |
| Peak | 1,433 Hz | -2.6 dB | 1.99 |
| Peak | 69 Hz | +1.5 dB | 1.35 |
| High shelf | 10,000 Hz | -5.4 dB | 0.70 |
| Peak | 5,556 Hz | +1.7 dB | 5.29 |
| Peak | 759 Hz | +0.5 dB | 2.36 |
| Peak | 335 Hz | -0.4 dB | 3.16 |
| Peak | 4,230 Hz | -0.6 dB | 5.10 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
FiiO FH3: $119.99 Amazon eBay
Pros: Bass and sub-bass sit within about 1 dB above the Harman target, giving kick drums and bass guitar a full, warm foundation without bloat. The hybrid design pairs a 10mm dynamic driver with two balanced armatures, and 114 dB/mW sensitivity at 24 ohms means a phone runs it easily. A preference score of 65 suits listeners who like a warm, bassy tilt.
Cons: The 3 to 6 kHz presence region sits about 5.7 dB below target, with a dip of 7.4 dB near 6.5 kHz, so vocals and cymbals lose bite and detail. Treble from 6 to 10 kHz is also about 2.2 dB low, which makes the sound dark and a little veiled. The KZ PR1 has a higher rating.
Full FiiO FH3 review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.59 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x 10mm dynamic + 2 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 65 (measured by HypetheSonics, via AutoEQ) |
| Impedance | 24 ohms |
| Sensitivity | 114 dB/mW |
| Tonal Tilt | -0.86 (negative is warmer, positive brighter) |
| Weight | 0 lbs (7.3 g) per earbud |
EQ preset to match the Harman target
Set a preamp of -4.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -4.0 dB | 0.70 |
| Peak | 4,061 Hz | +4.3 dB | 1.02 |
| Peak | 178 Hz | -2.5 dB | 1.19 |
| Peak | 1,183 Hz | -3.9 dB | 2.64 |
| Peak | 60 Hz | +2.7 dB | 0.83 |
| High shelf | 10,000 Hz | -0.6 dB | 0.70 |
| Peak | 545 Hz | +1.1 dB | 2.57 |
| Peak | 2,365 Hz | -2.4 dB | 4.99 |
| Peak | 6,488 Hz | +2.3 dB | 6.00 |
| Peak | 2,972 Hz | +1.8 dB | 5.25 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons