Short answer: the Mitus 112A for measured tonal balance, the DZR12 for raw output and bass reach. These rank #15 and #16 out of 37 12-inch powered PA speakers, priced at $1500 and $1198.49.
The Mitus 112A posts the stronger preference score. Medium-quality vendor data produces a 4.95 ideal-subwoofer preference score from a B&C neodymium woofer, rotatable 80° x 50° horn, plywood cabinet and 133dB claimed peak output. Its own cons note measured bass extension is about 79Hz, well short of the much deeper manufacturer response claim, so a subwoofer is advisable for full-range music, and controls are limited to presets and filters rather than app-based mixing and remote DSP.
The DZR12 goes deeper and louder, at a measured tonal cost. Premium cabinet construction, a 139dB claimed output and deep onboard 96kHz DSP suit demanding live work, with 48Hz measured extension, the deepest result among the scored Yamaha models in this class. But its own cons are candid: the medium-quality vendor measurement produces only a 4.22 ideal-subwoofer preference score, so the price buys output, processing and build more than neutral tonality. It’s heavy at roughly 21kg and has no Bluetooth audio.
Buy the Mitus 112A if measured tonal balance and a plywood cabinet matter more than peak output.
Buy the DZR12 if you need the deeper measured bass extension and higher output claim for demanding live work, and app-based control isn’t a priority.
Specifications Side By Side
| FBT Mitus 112A | Yamaha DZR12 | |
|---|---|---|
| Price | $1,500.00 | $1,198.49 |
| Ranked | #15 of 37 in 12-Inch Two-Way Powered PA Speakers | #16 of 37 in 12-Inch Two-Way Powered PA Speakers |
| Configuration | Active 2-way bass-reflex PA speaker | Active 2-way bass-reflex PA speaker |
| Drivers | 12" B&C neodymium woofer, 1" compression driver | 12" woofer, 2" compression driver |
| Frequency Response | 50Hz - 20kHz (-6dB, manufacturer specified) | 39Hz - 20kHz (manufacturer specified) |
| Dimensions | 25.8"H x 15"W x 15"D (655 x 380 x 380 mm) | 25.4"H x 16.1"W x 15.5"D (646 x 410 x 394 mm) |
| Amplifier Power | 900W RMS (600W LF + 300W HF); 1,800W peak (1,200W LF + 600W HF) | 2000W dynamic / 1100W burst / 950W continuous |
| Crossover Frequency | 1.5kHz (manufacturer specified) | 1800Hz (FIR-X) |
| Cabinet Material | 15mm Baltic birch plywood | Plywood with polyurea coating |
| Rigging | Twelve M10 fly points; 35mm pole socket | M10 points; dual 35mm pole mounts |
| Bass Extension (-3dB) | 103Hz (measured, vendor Spinorama data) | 48Hz (measured, vendor Spinorama data) |
| Coverage | 80° x 50°, rotatable | 90° x 60° |
| Maximum SPL | 133dB peak (manufacturer specified) | 139dB peak (manufacturer specified) |
| Inputs | XLR input and link | 2 x XLR/TRS combo |
| DSP | Yes, 8 EQ presets and high-pass filter | Yes |
| Bluetooth | No | No |
| Weight | 46.3 lbs / 21 kg | 47.2 lbs / 21.4 kg |
Related Speaker Comparisons
A few more comparisons worth a look in the same class:
- Yamaha DXR12mkII vs Axiom ED120A
- HK Audio LINEAR 7 112 FA vs RCF ART 732-A MK5
- HK Audio LINEAR 7 112 FA vs LD Systems DDQ12
- Axiom ED120A vs Yamaha DZR12
- Yamaha DXR12mkII vs FBT Mitus 112A
Prices on this page were last checked September 7, 2026 at 7:47 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
FBT Mitus 112A: $1,500.00 eBay
Pros: The medium-quality vendor data produces a 4.95 ideal-subwoofer preference score. A B&C neodymium woofer, rotatable 80° x 50° horn, plywood cabinet and 133dB claimed peak output form a capable professional package.
Cons: Measured bass extension is about 79Hz despite the much deeper manufacturer response claim, so a subwoofer is advisable for full-range music. Controls are limited to presets and filters rather than the app-based mixing and remote DSP found on newer competitors.
Full FBT Mitus 112A review and specifications →
| Amplifier Power | 900W RMS (600W LF + 300W HF); 1,800W peak (1,200W LF + 600W HF) |
|---|---|
| Bass Extension (-3dB) | 103Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | 15mm Baltic birch plywood |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 80° x 50°, rotatable |
| Crossover Frequency | 1.5kHz (manufacturer specified) |
| DSP | Yes, 8 EQ presets and high-pass filter |
| Dimensions | 25.8"H x 15"W x 15"D (655 x 380 x 380 mm) |
| Drivers | 12" B&C neodymium woofer, 1" compression driver |
| Frequency Response | 50Hz - 20kHz (-6dB, manufacturer specified) |
| Inputs | XLR input and link |
| Maximum SPL | 133dB peak (manufacturer specified) |
| Rigging | Twelve M10 fly points; 35mm pole socket |
| Weight | 46.3 lbs / 21 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Yamaha DZR12: $1,198.49 Amazon B&H Photo Video Guitar Center eBay
Pros: Premium cabinet construction, 139dB claimed output and deep onboard 96kHz DSP suit demanding live work. The local vendor data shows useful 48Hz measured extension, the deepest result among the scored Yamaha models here.
Cons: Its medium-quality vendor measurement produces only a 4.22 ideal-subwoofer preference score, so the price buys output, processing and build more than neutral tonality. It is heavy at roughly 21kg and has no Bluetooth audio.
Full Yamaha DZR12 review and specifications →
| Amplifier Power | 2000W dynamic / 1100W burst / 950W continuous |
|---|---|
| Bass Extension (-3dB) | 48Hz (measured, vendor Spinorama data) |
| Bluetooth | No |
| Cabinet Material | Plywood with polyurea coating |
| Configuration | Active 2-way bass-reflex PA speaker |
| Coverage | 90° x 60° |
| Crossover Frequency | 1800Hz (FIR-X) |
| DSP | Yes |
| Dimensions | 25.4"H x 16.1"W x 15.5"D (646 x 410 x 394 mm) |
| Drivers | 12" woofer, 2" compression driver |
| Frequency Response | 39Hz - 20kHz (manufacturer specified) |
| Inputs | 2 x XLR/TRS combo |
| Maximum SPL | 139dB peak (manufacturer specified) |
| Rigging | M10 points; dual 35mm pole mounts |
| Weight | 47.2 lbs / 21.4 kg |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons