Short answer: a tie on sound quality. Both are rated 4.6/5 (#39 and #52 of 450 in-ear headphones) at nearly the same price ($22.99 vs $23.99), so choose on features and fit.
The case for the DUNU Kima Classic: Across 10 hobbyist measurements on squig.link it earns a preference score of 81.6 with only 1.22 dB of deviation, so the tuning stays close to what most listeners prefer from deep bass through the upper mids. Watch for: A 6.6 dB dip near 10.9 kHz takes some sparkle and shimmer off cymbals.
Why pick the Shanling Tino: Five squig.link measurements give it a preference score of 80.8 with 1.37 dB of deviation, and its dual dynamic drivers keep sub-bass within a fraction of a dB of target to 30 Hz. The tradeoff: A 5.2 dB dip near 10.6 kHz and treble about 1.2 dB under target trim some sparkle from cymbals and ambience.
Buy the DUNU Kima Classic or the Shanling Tino on features: they are rated the same for sound quality at close to the same price.
Looking for alternatives? See the complete Headphones rankings.
Specifications Side By Side
| DUNU Kima Classic | Shanling Tino | |
|---|---|---|
| Price | $22.99 | $23.99 |
| Ranked | #39 of 450 in In-Ear Headphones | #52 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 82 (median of 10 squig.link measurements, calibrated to AutoEQ) | 81 (median of 5 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 1.22 dB standard deviation | 1.37 dB standard deviation |
| Tonal Tilt | -0.26 (negative is warmer, positive brighter) | -0.22 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.8 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (-0.2 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 10mm dynamic | 1 x 10mm dynamic + 1 x 8mm dynamic |
| Impedance | 32 ohms | 16 ohms |
| Sensitivity | 108 dB | 113 dB |
| Frequency Response | 5Hz - 40kHz (Manufacturer specified) | 18Hz - 28kHz (Manufacturer specified) |
| Built-in Microphone | No | No |
| Weight | - | 0 lbs (4.6 g) per earbud |
Related Headphone Comparisons
How DUNU Kima Classic compares with other leading options:
- Aoshida E20 vs DUNU Kima Classic
- DUNU Kima Classic vs ThieAudio Monarch MKII
- DUNU Kima Classic vs Moondrop Chu 2 DSP
- DUNU Kima Classic vs Tanchjim Ola Bass
- Shanling Tino vs Tanchjim Ola Bass
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
DUNU Kima Classic: $22.99 Amazon eBay
Pros: Across 10 hobbyist measurements on squig.link it earns a preference score of 81.6 with only 1.22 dB of deviation, so the tuning stays close to what most listeners prefer from deep bass through the upper mids. Bass sits about 1.2 dB above target and sub-bass reaches 20 Hz without rolling off, giving kick drums real weight without muddying vocals. The single 10mm dynamic driver at 32 ohms and 108 dB plays loudly from a phone dongle, and it carries a higher rating than the pricier KBEAR KB01.
Cons: A 6.6 dB dip near 10.9 kHz takes some sparkle and shimmer off cymbals. There is no inline microphone, so it cannot double as a calling headset.
Full DUNU Kima Classic review and specifications →
| Released | Apr 2023 (3 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.22 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 5Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 82 (median of 10 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 108 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.8 dB at 30 Hz) |
| Tonal Tilt | -0.26 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Shanling Tino: $23.99 Amazon eBay
Pros: Five squig.link measurements give it a preference score of 80.8 with 1.37 dB of deviation, and its dual dynamic drivers keep sub-bass within a fraction of a dB of target to 30 Hz. A 1.4 dB bass lift adds warmth while the upper mids and presence stay within about half a dB of target, so vocals sound natural. At 113 dB sensitivity and 16 ohms it gets loud from any phone, and it shares its rating with the Moondrop Marigold and DUNU Kima Classic.
Cons: A 5.2 dB dip near 10.6 kHz and treble about 1.2 dB under target trim some sparkle from cymbals and ambience. A 4 dB peak at 8.1 kHz can occasionally emphasize sibilance, and there is no built-in mic.
Full Shanling Tino review and specifications →
| Back | Closed |
|---|---|
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.37 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic + 1 x 8mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 18Hz - 28kHz (Manufacturer specified) |
| Harman Preference Score | 81 (median of 5 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 16 ohms |
| Sensitivity | 113 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.2 dB at 30 Hz) |
| Tonal Tilt | -0.22 (negative is warmer, positive brighter) |
| Weight | 0 lbs (4.6 g) per earbud |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons