Short answer: the Shanling Tino. It ranks #52 of 450 in-ear headphones by sound quality, rated 4.6/5, at $23.99; the Tanchjim Bunny ranks #81, rated 4.5/5, at $23.99. Close enough in price that the sound-quality gap is the deciding factor.
Why pick the Shanling Tino: Five squig.link measurements give it a preference score of 80.8 with 1.37 dB of deviation, and its dual dynamic drivers keep sub-bass within a fraction of a dB of target to 30 Hz. Watch for: A 5.2 dB dip near 10.6 kHz and treble about 1.2 dB under target trim some sparkle from cymbals and ambience.
Buy the Shanling Tino. It is rated higher for sound quality than the Tanchjim Bunny at the same price, so only choose the other one for a particular feature it does better.
Still deciding? The full Headphones rankings cover every ranked option.
Specifications Side By Side
| Shanling Tino | Tanchjim Bunny | |
|---|---|---|
| Price | $23.99 | $23.99 |
| Ranked | #52 of 450 in In-Ear Headphones | #81 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 81 (median of 5 squig.link measurements, calibrated to AutoEQ) | 80 (median of 3 squig.link measurements, calibrated to AutoEQ) |
| Deviation From Target | 1.37 dB standard deviation | 1.51 dB standard deviation |
| Tonal Tilt | -0.22 (negative is warmer, positive brighter) | +0.00 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.2 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (-3.2 dB at 30 Hz) |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 10mm dynamic + 1 x 8mm dynamic | 1 x dynamic |
| Impedance | 16 ohms | 30 ohms |
| Sensitivity | 113 dB | 123 dB/Vrms |
| Weight | 0 lbs (4.6 g) per earbud | - |
| Frequency Response | 18Hz - 28kHz (Manufacturer specified) | 8Hz - 48kHz (Manufacturer specified) |
| Built-in Microphone | No | Yes |
Related Headphone Comparisons
More top alternatives to Shanling Tino:
- DUNU Kima Classic vs Shanling Tino
- Moondrop Chu 2 DSP vs Shanling Tino
- Shanling Tino vs Tanchjim Ola Bass
- Tanchjim Bunny vs Shuoer DZ4
- Tanchjim Bunny vs TANGZU Wu Heyday
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
Shanling Tino: $23.99 Amazon eBay
Pros: Five squig.link measurements give it a preference score of 80.8 with 1.37 dB of deviation, and its dual dynamic drivers keep sub-bass within a fraction of a dB of target to 30 Hz. A 1.4 dB bass lift adds warmth while the upper mids and presence stay within about half a dB of target, so vocals sound natural. At 113 dB sensitivity and 16 ohms it gets loud from any phone, and it shares its rating with the Moondrop Marigold and DUNU Kima Classic.
Cons: A 5.2 dB dip near 10.6 kHz and treble about 1.2 dB under target trim some sparkle from cymbals and ambience. A 4 dB peak at 8.1 kHz can occasionally emphasize sibilance, and there is no built-in mic.
Full Shanling Tino review and specifications →
| Back | Closed |
|---|---|
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.37 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic + 1 x 8mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 18Hz - 28kHz (Manufacturer specified) |
| Harman Preference Score | 81 (median of 5 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 16 ohms |
| Sensitivity | 113 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.2 dB at 30 Hz) |
| Tonal Tilt | -0.22 (negative is warmer, positive brighter) |
| Weight | 0 lbs (4.6 g) per earbud |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Tanchjim Bunny: $23.99 Amazon eBay
Full Tanchjim Bunny review and specifications →
| Back | Closed |
|---|---|
| Built-in Microphone | Yes |
| Connection | Wired |
| Deviation From Target | 1.51 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x dynamic |
| Form Factor | In-ear |
| Frequency Response | 8Hz - 48kHz (Manufacturer specified) |
| Harman Preference Score | 80 (median of 3 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 30 ohms |
| Sensitivity | 123 dB/Vrms |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-3.2 dB at 30 Hz) |
| Tonal Tilt | +0.00 (negative is warmer, positive brighter) |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons