Coverage note. Speaker Ranking currently covers 4 Shanling models across headphones. These are the products in our database, not a complete list of everything Shanling makes.
What this page covers. The Shanling models ranked here span headphones, including Shanling Tino, Shanling ME500 and Shanling ME200. Use each model’s category position to compare it with alternatives of the same size and use case.
This page lists all 4 Shanling speakers ranked on this site across headphones. Each model is shown in the category where it competes, with its current rank and the size of that ranking.
Use the category position rather than the brand name alone: speakers from the same manufacturer can perform very differently by size, price and product family.
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
In-Ear Headphones
Ranked #51 of 297 in In-Ear Headphones - Shanling Tino: $23.99 Amazon eBay
Pros: Five squig.link measurements give it a preference score of 80.8 with 1.37 dB of deviation, and its dual dynamic drivers keep sub-bass within a fraction of a dB of target to 30 Hz. A 1.4 dB bass lift adds warmth while the upper mids and presence stay within about half a dB of target, so vocals sound natural. At 113 dB sensitivity and 16 ohms it gets loud from any phone, and it shares its rating with the Moondrop Marigold and DUNU Kima Classic.
Cons: A 5.2 dB dip near 10.6 kHz and treble about 1.2 dB under target trim some sparkle from cymbals and ambience. A 4 dB peak at 8.1 kHz can occasionally emphasize sibilance, and there is no built-in mic.
Full Shanling Tino review and specifications →
| Back | Closed |
|---|---|
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 1.37 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic + 1 x 8mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 18Hz - 28kHz (Manufacturer specified) |
| Harman Preference Score | 81 (median of 5 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 16 ohms |
| Sensitivity | 113 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-0.2 dB at 30 Hz) |
| Tonal Tilt | -0.22 (negative is warmer, positive brighter) |
| Weight | 0 lbs (4.6 g) per earbud |
- Reviews, Comparisons and Sound Samples
Ranked #193 of 297 in In-Ear Headphones - Shanling ME500: $269.00 Apos Audio eBay
Pros: A one dynamic plus two balanced armature hybrid with a preference score of 69 in crinacle’s measurement and a balance that leans very slightly bright rather than warm. It rates higher than the cheaper Shanling ME200, and at 18 ohms and 111 dB sensitivity it is easy to drive from a phone.
Cons: An average deviation of about 2.8 dB from target means some frequency bands still stand out. The Fearless Audio Shangri-la rates clearly higher for a little less money.
Full Shanling ME500 review and specifications →
| Back | Closed |
|---|---|
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 2.76 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 2 balanced armature) |
| Drivers | 1 x 10mm dynamic + 2 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 69 (measured by crinacle, via AutoEQ) |
| Impedance | 18 ohms |
| Sensitivity | 111 dB |
| Tonal Tilt | +0.15 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +7.3 dB | 0.70 |
| Peak | 83 Hz | -4.6 dB | 0.24 |
| Peak | 6,418 Hz | +5.5 dB | 2.11 |
| Peak | 876 Hz | +3.7 dB | 0.90 |
| Peak | 1,774 Hz | -2.5 dB | 1.61 |
| High shelf | 10,000 Hz | +3.0 dB | 0.70 |
| Peak | 6,985 Hz | +3.9 dB | 1.20 |
| Peak | 4,343 Hz | -5.2 dB | 4.21 |
| Peak | 3,205 Hz | +2.1 dB | 5.60 |
| Peak | 7,141 Hz | -6.2 dB | 3.77 |
- Reviews, Comparisons and Sound Samples
Ranked #211 of 297 in In-Ear Headphones - Shanling ME200: $179.00 Apos Audio eBay
Pros: A one dynamic plus one balanced armature hybrid with a preference score of 66 in crinacle’s measurement and a gently warm balance. It weighs only 6.3 g per earpiece, and at 16 ohms and 111 dB sensitivity it plays loud from any phone.
Cons: Its response deviates about 2.7 dB from target on average, so it is not especially even. The wired Sennheiser IE 40 Pro rates higher for less money.
Full Shanling ME200 review and specifications →
| Back | Closed |
|---|---|
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 2.71 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 1 balanced armature) |
| Drivers | 1 x dynamic + 1 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 66 (measured by crinacle, via AutoEQ) |
| Impedance | 16 ohms |
| Sensitivity | 111 dB |
| Tonal Tilt | -0.57 (negative is warmer, positive brighter) |
| Weight | 0 lbs (6.3 g) |
EQ preset to match the Harman target
Set a preamp of -6.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.7 dB | 0.70 |
| Peak | 10,000 Hz | +5.8 dB | 0.69 |
| Peak | 153 Hz | -4.3 dB | 0.49 |
| Peak | 996 Hz | +5.5 dB | 0.82 |
| Peak | 1,532 Hz | -4.4 dB | 0.99 |
| High shelf | 10,000 Hz | +1.5 dB | 0.70 |
| Peak | 4,590 Hz | -1.9 dB | 3.66 |
| Peak | 6,043 Hz | +2.8 dB | 5.81 |
| Peak | 7,382 Hz | -2.0 dB | 5.56 |
| Peak | 3,395 Hz | +1.1 dB | 4.13 |
- Reviews, Comparisons and Sound Samples
Ranked #236 of 297 in In-Ear Headphones - Shanling ME700: $559.00 Apos Audio eBay
Pros: A one dynamic plus four balanced armature hybrid with a preference score of 62 in crinacle’s measurement and a warm leaning balance. At 18 ohms and 106 dB sensitivity it plays loud enough from a phone, and each earpiece weighs just 6.8 g.
Cons: Its response strays about 2.9 dB from target on average, so tonal balance is less even than on higher rated in-ears. The HiBy Crystal 6 earns the same rating for less money.
Full Shanling ME700 review and specifications →
| Back | Closed |
|---|---|
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 2.89 dB standard deviation |
| Driver Type | Hybrid (1 dynamic + 4 balanced armature) |
| Drivers | 1 x 10mm dynamic + 4 x balanced armature |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 62 (measured by crinacle, via AutoEQ) |
| Impedance | 18 ohms |
| Sensitivity | 106 dB |
| Tonal Tilt | -0.79 (negative is warmer, positive brighter) |
| Weight | 0 lbs (6.8 g) |
EQ preset to match the Harman target
Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -0.1 dB | 0.70 |
| Peak | 174 Hz | -3.9 dB | 0.80 |
| Peak | 5,657 Hz | +6.1 dB | 1.73 |
| Peak | 3,797 Hz | +2.2 dB | 1.06 |
| Peak | 6,643 Hz | -2.1 dB | 2.56 |
| High shelf | 10,000 Hz | +4.9 dB | 0.70 |
| Peak | 1,444 Hz | -2.2 dB | 2.49 |
| Peak | 9,994 Hz | -2.3 dB | 1.67 |
| Peak | 2,291 Hz | +1.6 dB | 3.58 |
| Peak | 695 Hz | +0.8 dB | 1.88 |
- Reviews, Comparisons and Sound Samples