The Shanling MG600 ranks #505 out of 749 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: Shanling
Prices on this page were last checked October 12, 2026 at 4:13 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#505 Shanling MG600 Discontinued eBay
Pros: Crinacle’s measurement gives it a solid Harman preference score of 69 with a 2.67 dB spread. Its tonal tilt of -0.09 sits close to the target, so the overall balance is neither dark nor bright. It uses 1 x 10mm dynamic with an easy 22 ohm load.
Cons: Discontinued, so it is mainly found used. Its 2.67 dB spread is less even than the best measured sets.
| Released | May 2022 (4 years ago) |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.67 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz |
| Harman Preference Score | 69 (measured by crinacle, via AutoEQ) |
| Impedance | 22 ohms |
| Tonal Tilt | -0.09 (negative is warmer, positive brighter) |
| Weight | 0 lbs (3.3g) per earpiece |
EQ preset to match the Harman target
Set a preamp of -5.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +4.4 dB | 0.70 |
| Peak | 76 Hz | -3.6 dB | 0.28 |
| Peak | 863 Hz | +4.8 dB | 0.70 |
| Peak | 2,542 Hz | -6.0 dB | 0.55 |
| Peak | 7,031 Hz | +7.4 dB | 0.94 |
| High shelf | 10,000 Hz | +4.6 dB | 0.70 |
| Peak | 4,376 Hz | -4.6 dB | 6.00 |
| Peak | 3,256 Hz | +3.3 dB | 3.22 |
| Peak | 2,393 Hz | -2.6 dB | 4.51 |
| Peak | 7,812 Hz | -2.9 dB | 5.46 |
- Reviews, Comparisons and Sound Samples