The Shanling ME100 ranks #780 out of 865 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: Shanling
Prices on this page were last checked October 13, 2026 at 3:17 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#780 Shanling ME100 Discontinued eBay
Pros: Its tonal tilt of +0.56 sits close to the target, so the overall balance is neither dark nor bright. It uses 1 x 10mm dynamic with an easy 16 ohm load.
Cons: Discontinued, so it is mainly found used. A Harman score of 50 places it in the lower part of the in-ear rankings.
| Released | 2019 (7 years ago) |
|---|---|
| Connection | Wired |
| Deviation From Target | 3.90 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40kHz |
| Harman Preference Score | 50 (measured by crinacle, via AutoEQ) |
| Impedance | 16 ohms |
| Tonal Tilt | +0.56 (negative is warmer, positive brighter) |
| Weight | 0.1 lbs (28g) |
EQ preset to match the Harman target
Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +6.3 dB | 0.70 |
| Peak | 268 Hz | -4.0 dB | 0.44 |
| Peak | 865 Hz | +4.2 dB | 1.64 |
| Peak | 6,485 Hz | +4.7 dB | 4.07 |
| Peak | 9,429 Hz | +4.4 dB | 2.14 |
| High shelf | 10,000 Hz | +1.4 dB | 0.70 |
| Peak | 3,415 Hz | +3.5 dB | 2.57 |
| Peak | 4,841 Hz | -5.5 dB | 5.25 |
| Peak | 1,551 Hz | -0.7 dB | 2.51 |
| Peak | 5,793 Hz | +1.5 dB | 6.00 |
- Reviews, Comparisons and Sound Samples