What this page covers. The Selah Audio models ranked here span passive speakers, including Selah Audio Purezza and Selah Audio Integrity. Use each model’s category position to compare it with alternatives of the same size and use case.
This page lists all 2 Selah Audio speakers ranked on this site across passive speakers. Each model is shown in the category where it competes, with its current rank and the size of that ranking.
Use the category position rather than the brand name alone: speakers from the same manufacturer can perform very differently by size, price and product family.
Prices on this page were last checked September 6, 2026 at 7:27 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
Large Size Bookshelf Speakers
Ranked #30 of 131 in Large Size Bookshelf Speakers - Selah Audio Purezza: Contact manufacturer Selah Audio eBay
Pros: Premium two-way built around Purifi’s exceptionally linear 6.5-inch woofer and a tall RAAL ribbon. Erin measured about 85dB/2.83V/1m sensitivity, a 4.7-ohm minimum and the lowest midrange nonlinear distortion he had measured at the time. It reached roughly 103dB at 1m with little audible strain; horizontal response is smooth and broad, and Erin’s 200Hz low shelf (+3.5dB, Q 0.7) flattened the lower-mid/bass balance effectively.
Cons: The ribbon’s tall aperture creates deliberately narrow vertical radiation (roughly 20-30 degrees around 7kHz), so stand height and listening elevation are critical. Erin found a directivity change around 1-2kHz, a feature near 4kHz, and insufficient baffle-step compensation below 200-300Hz in his sample. The 4.7-ohm minimum and modest sensitivity favor a separate amplifier. A subwoofer crossed near 80Hz is recommended for distance and output.
Full Selah Audio Purezza review and specifications →
| Bass Extension | Subwoofer crossover near 80Hz recommended by Erin's Audio Corner |
|---|---|
| Bass Extension (-10dB) | 34.9Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 86.0Hz (measured, Erin's Audio Corner) |
| Drivers | RAAL ribbon tweeter; 6.5" Purifi woofer |
| Impedance | 4.7 ohms minimum (measured, Erin's Audio Corner) |
| Max SPL | Approximately 103dB at 1m (measured, Erin's Audio Corner) |
| Sensitivity | Approximately 85dB/2.83V/1m (measured, Erin's Audio Corner) |
| Woofer Cabinet | ported |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Ranked #37 of 131 in Large Size Bookshelf Speakers - Selah Audio Integrity: $750 eBay
Pros: CEA2034 spinorama shows a very good overall on-axis response with wide, even beamwidth and directivity through the midrange from its 3-way design. Nominal impedance sits around 5.5 ohms, an easier load than many small speakers. A tribute design to DIY speaker builder Jeff Bagby, priced at $750 per pair as a kit.
Cons: A dip/perturbation around 1.7kHz shows up in both on- and off-axis measurements, correlating with a matching midrange distortion peak at the same frequency. Very inefficient, requiring more amplifier power for the same volume. Susceptible to subsonic content, which can cause massive distortion without a high-pass filter. Requires building the cabinets and installing the drivers yourself.
Full Selah Audio Integrity review and specifications →
| Bass Extension (-10dB) | 50Hz (measured, Audio Science Review) |
|---|---|
| Bass Extension (-3dB) | 68Hz (measured, Audio Science Review) |
| Dimensions | not published (DIY kit) |
| Drivers | Dayton Esoteric woofer, SB Acoustics midrange, tweeter, rear oval passive radiator (3-way) |
| Impedance | 5.5 ohms nominal |
| Sensitivity | 80.5dB (2.83V/1m, measured, Audio Science Review) |
| Weight | not published (DIY kit) |
| Woofer Cabinet | sealed with passive radiator |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons