The intime Miyabi MarkII ranks #623 out of 1253 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: intime
Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#623 intime Miyabi MarkII: $180 eBay
Pros: A broadly balanced tuning with a preference score of 71 against the Harman target.
Cons: Treble about 4 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.4 dB standard deviation from target.
Is the intime Miyabi MarkII right for you?
Buy it if
- you are sensitive to bright or sharp treble (treble sits 3.7 dB below target).
- you are happy to use EQ: our preset lifts its Harman match by about 16 points.
Skip it if
- you want the best value: the higher-rated EPZ G10 costs about $156 less.
| Back | Closed |
|---|---|
| Connection | Wired (3.5mm) |
| Deviation From Target | 2.36 dB standard deviation |
| Driver Type | Hybrid |
| Drivers | 1 Dynamic, 1 Piezoelectric (VST2) |
| Form Factor | In-ear |
| Harman Preference Score | 71 (median of 4 squig.link measurements, calibrated to AutoEQ) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-2.9 dB at 30 Hz) |
| Tonal Tilt | -0.25 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 87 out of 100, up from 71.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.4 dB | 0.70 |
| High shelf | 10,000 Hz | -2.2 dB | 0.70 |
| Peak | 23 Hz | +1.5 dB | 1.65 |
| Peak | 139 Hz | -2.0 dB | 0.73 |
| Peak | 1,502 Hz | -1.6 dB | 3.16 |
| Peak | 3,148 Hz | +1.5 dB | 2.14 |
| Peak | 5,345 Hz | +6.0 dB | 1.17 |
| Peak | 7,466 Hz | -3.0 dB | 4.52 |
Neutral target
Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 89 out of 100, up from 43.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -6.2 dB | 0.70 |
| High shelf | 10,000 Hz | -2.2 dB | 0.70 |
| Peak | 23 Hz | +1.2 dB | 1.05 |
| Peak | 85 Hz | -2.0 dB | 0.69 |
| Peak | 225 Hz | -1.2 dB | 1.81 |
| Peak | 1,493 Hz | -1.6 dB | 3.02 |
| Peak | 3,148 Hz | +1.5 dB | 2.18 |
| Peak | 5,345 Hz | +6.0 dB | 1.17 |
| Peak | 7,466 Hz | -3.0 dB | 4.51 |
Studio flat target
Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 88 out of 100, up from 25.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -8.7 dB | 0.70 |
| High shelf | 10,000 Hz | +1.9 dB | 0.70 |
| Peak | 161 Hz | -3.8 dB | 0.67 |
| Peak | 1,480 Hz | -1.7 dB | 3.04 |
| Peak | 2,567 Hz | +2.7 dB | 6.00 |
| Peak | 4,148 Hz | +5.7 dB | 0.95 |
| Peak | 7,538 Hz | -1.9 dB | 6.00 |
Warm target
Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 84 out of 100, up from 76.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +2.6 dB | 0.70 |
| High shelf | 10,000 Hz | -5.8 dB | 0.70 |
| Peak | 4,903 Hz | +5.4 dB | 1.95 |
| Peak | 7,697 Hz | -2.7 dB | 6.00 |
Bass target
Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 88 out of 100, up from 63.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.5 dB | 0.70 |
| High shelf | 10,000 Hz | -2.2 dB | 0.70 |
| Peak | 198 Hz | -1.8 dB | 0.98 |
| Peak | 1,503 Hz | -1.6 dB | 3.19 |
| Peak | 3,148 Hz | +1.5 dB | 2.14 |
| Peak | 5,345 Hz | +6.0 dB | 1.17 |
| Peak | 7,467 Hz | -3.0 dB | 4.52 |
Bright target
Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 73 out of 100, up from 31.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -6.2 dB | 0.70 |
| High shelf | 10,000 Hz | +1.0 dB | 0.70 |
| Peak | 4,321 Hz | +6.0 dB | 1.09 |
V-shaped target
Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 79 out of 100, up from 60.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.7 dB | 0.70 |
| High shelf | 10,000 Hz | +1.8 dB | 0.70 |
| Peak | 535 Hz | +1.0 dB | 2.17 |
| Peak | 1,389 Hz | -2.0 dB | 2.78 |
| Peak | 2,755 Hz | +1.3 dB | 3.64 |
| Peak | 4,263 Hz | +6.0 dB | 1.01 |
| Peak | 5,632 Hz | +1.6 dB | 6.00 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the intime Miyabi MarkII measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 4 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: median of 4 measurements from the squig.link databases of bryaudioreviews, freeryder05, lown-fi and smirk. Thanks to each of them for publishing their work.