Yongse YOLO Review: Ranked #438 of 1476

Last updated: October 21, 2026

The Yongse YOLO ranks #438 out of 1476 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#438 Yongse YOLO: $21.39 Amazon $21.39 eBay

Pros: A budget 10 mm dynamic IEM at about $21 with a preference score of 75. Bass and midrange stay within 1.5 dB of target down to 20 Hz, and the detachable 2 pin cable includes an inline mic.

Cons: Treble is uneven: a 7.6 dB dip near 5.9 kHz, a 5.1 dB peak near 8.2 kHz and a 4.9 dB dip near 10 kHz, so detail can sound slightly veiled with occasional sparkle. Sensitivity is not published, and the score rests on a single measurement.

Is the Yongse YOLO right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 75).
  • your taste runs warm: it scores 81 for that sound.
  • you are sensitive to bright or sharp treble (treble sits 2.1 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.

Skip it if

  • you want the best value: the higher-rated TRN MT3 costs about $3 less.
BackClosed
Built-in MicrophoneYes
ConnectionWired
Deviation From Target1.98 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic
Form FactorIn-ear
Harman Preference Score75 (1 squig.link measurement, calibrated to AutoEQ)
Impedance16 ohms
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.2 dB at 30 Hz)
Tonal Tilt-0.49 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 86 out of 100, up from 75.

FilterFrequencyGainQ
High shelf10,000 Hz-2.6 dB0.70
Peak186 Hz-1.9 dB0.92
Peak703 Hz+1.0 dB2.67
Peak3,671 Hz-1.9 dB5.50
Peak5,605 Hz+6.0 dB3.27

Neutral target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 86 out of 100, up from 38.

FilterFrequencyGainQ
Low shelf105 Hz-8.7 dB0.70
High shelf10,000 Hz-2.6 dB0.70
Peak186 Hz-1.8 dB0.78
Peak703 Hz+1.0 dB2.42
Peak3,673 Hz-1.9 dB5.54
Peak5,605 Hz+6.0 dB3.26

Studio flat target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 86 out of 100, up from 21.

FilterFrequencyGainQ
Low shelf105 Hz-11.2 dB0.70
High shelf10,000 Hz+1.4 dB0.70
Peak177 Hz-3.7 dB0.80
Peak2,484 Hz+2.8 dB3.44
Peak3,925 Hz-1.8 dB6.00
Peak5,701 Hz+6.0 dB3.81

Warm target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 88 out of 100, up from 81.

FilterFrequencyGainQ
High shelf10,000 Hz-6.0 dB0.70
Peak186 Hz-1.7 dB1.13
Peak3,462 Hz-2.8 dB2.61
Peak5,117 Hz+1.8 dB6.00
Peak5,801 Hz+6.0 dB5.39

Bass target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 87 out of 100, up from 73.

FilterFrequencyGainQ
Low shelf105 Hz+3.6 dB0.70
High shelf10,000 Hz-2.6 dB0.70
Peak186 Hz-1.9 dB1.07
Peak703 Hz+0.9 dB2.92
Peak3,669 Hz-1.9 dB5.46
Peak5,605 Hz+6.0 dB3.27

Bright target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 78 out of 100, up from 27.

FilterFrequencyGainQ
Low shelf105 Hz-8.8 dB0.70
High shelf10,000 Hz+0.5 dB0.70
Peak186 Hz-1.9 dB0.79
Peak5,320 Hz+6.0 dB2.30

V-shaped target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 75 out of 100, up from 66.

FilterFrequencyGainQ
Low shelf105 Hz+4.3 dB0.70
High shelf10,000 Hz+1.3 dB0.70
Peak1,292 Hz-1.2 dB4.15
Peak5,223 Hz+6.0 dB2.06

Frequency Response

How the Yongse YOLO measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Yongse YOLOHarman target
Measured frequency response of the Yongse YOLO-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: a single measurement from the squig.link database of obodio. Thanks to them for publishing their work.