The Whizzer Kylin HE01B ranks #378 out of 1490 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: Whizzer
Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#378 Whizzer Kylin HE01B: $84.90 Discontinued eBay
Pros: A 10.2 mm dynamic IEM with a preference score of 76. Bass reaches 20 Hz with a 2.4 dB upper bass lift, the midrange is on target, and the 2 pin cable is detachable.
Cons: Treble from 5 to 12 kHz runs about 3 dB low with dips of 5.7 dB near 6.3 kHz and 5.4 dB near 10 kHz, so cymbals sound soft. It is discontinued after selling for $85, and the score rests on a single measurement.
Is the Whizzer Kylin HE01B right for you?
Buy it if
- you want the tuning most listeners prefer in blind tests out of the box (Harman score 76).
- you want sub-bass rumble that reaches down to 20 Hz.
Skip it if
- you want to buy it new: it is discontinued.
| Released | Sep 2021 (5 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 2.15 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10.2mm dynamic (PU + PEEK composite diaphragm) |
| Form Factor | In-ear |
| Frequency Response | 15Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 76 (1 squig.link measurement, calibrated to AutoEQ) |
| Impedance | 18 ohms |
| Sensitivity | 112 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-2.7 dB at 30 Hz) |
| Tonal Tilt | +0.00 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -4.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 86 out of 100, up from 76.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.6 dB | 0.70 |
| High shelf | 10,000 Hz | -4.5 dB | 0.70 |
| Peak | 165 Hz | -3.8 dB | 0.73 |
| Peak | 2,631 Hz | -1.8 dB | 1.53 |
| Peak | 5,903 Hz | +5.6 dB | 5.50 |
Neutral target
Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 49.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -6.9 dB | 0.70 |
| High shelf | 10,000 Hz | -4.5 dB | 0.70 |
| Peak | 154 Hz | -3.9 dB | 0.66 |
| Peak | 802 Hz | +1.5 dB | 2.20 |
| Peak | 2,634 Hz | -1.8 dB | 1.54 |
| Peak | 5,903 Hz | +5.6 dB | 5.49 |
| Peak | 7,083 Hz | +1.3 dB | 6.00 |
Studio flat target
Set a preamp of -3.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 88 out of 100, up from 31.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -9.5 dB | 0.70 |
| High shelf | 10,000 Hz | +1.1 dB | 0.70 |
| Peak | 170 Hz | -5.7 dB | 0.72 |
| Peak | 823 Hz | +1.4 dB | 2.25 |
| Peak | 2,849 Hz | +1.0 dB | 3.46 |
| Peak | 4,355 Hz | -2.4 dB | 6.00 |
| Peak | 6,020 Hz | +3.5 dB | 5.89 |
Warm target
Set a preamp of -3.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 89 out of 100, up from 73.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +1.8 dB | 0.70 |
| High shelf | 10,000 Hz | -6.0 dB | 0.70 |
| Peak | 162 Hz | -3.6 dB | 0.76 |
| Peak | 804 Hz | +1.7 dB | 2.16 |
| Peak | 2,237 Hz | -1.8 dB | 2.44 |
| Peak | 3,654 Hz | -3.0 dB | 1.57 |
| Peak | 5,962 Hz | +4.2 dB | 5.56 |
Bass target
Set a preamp of -5.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 87 out of 100, up from 62.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.1 dB | 0.70 |
| High shelf | 10,000 Hz | -4.5 dB | 0.70 |
| Peak | 174 Hz | -3.8 dB | 0.80 |
| Peak | 2,629 Hz | -1.8 dB | 1.52 |
| Peak | 5,903 Hz | +5.6 dB | 5.50 |
Bright target
Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 81 out of 100, up from 38.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -7.0 dB | 0.70 |
| High shelf | 10,000 Hz | -1.2 dB | 0.70 |
| Peak | 156 Hz | -3.9 dB | 0.67 |
| Peak | 2,286 Hz | -1.5 dB | 2.37 |
| Peak | 5,640 Hz | +6.0 dB | 3.22 |
V-shaped target
Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 78 out of 100, up from 61.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.4 dB | 0.70 |
| Peak | 41 Hz | +1.0 dB | 1.66 |
| Peak | 166 Hz | -2.4 dB | 0.92 |
| Peak | 5,552 Hz | +6.0 dB | 2.90 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the Whizzer Kylin HE01B measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: a single measurement from the squig.link database of fahryst. Thanks to them for publishing their work.