ThieAudio Prestige Review: Ranked #607 of 1061

Last updated: October 15, 2026

The ThieAudio Prestige ranks #607 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Thieaudio

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#607 ThieAudio Prestige: $1,299.00 Linsoul $1,299.00 eBay

Pros: A tribrid flagship with four electrostatic tweeters, four balanced armatures and a dynamic driver. Measurements show full sub-bass to 20 Hz (score 69 across nine measurements).

Cons: Very expensive for its rating, and a low 95 dB sensitivity needs more volume.

Is the ThieAudio Prestige right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 2.4 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 22 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $1,275 less.
Released2022 (4 years ago)
BackClosed
ConnectionWired
Deviation From Target2.10 dB standard deviation
Driver TypeTribrid
Drivers1 x dynamic + 4 x balanced armature + 4 x electrostatic
Form FactorIn-ear
Harman Preference Score69 (median of 9 squig.link measurements, calibrated to AutoEQ)
Impedance11 ohms
Sensitivity95 dB @1kHz
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.2 dB at 30 Hz)
Tonal Tilt-0.79 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -4.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 9 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 91 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz-1.0 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak139 Hz-3.5 dB0.84
Peak4,039 Hz+4.6 dB1.03

Neutral target

Set a preamp of -4.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 9 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 93 out of 100, up from 31.

FilterFrequencyGainQ
Low shelf105 Hz-9.6 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak131 Hz-3.5 dB0.75
Peak4,039 Hz+4.6 dB1.03

Studio flat target

Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 9 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 11.

FilterFrequencyGainQ
Low shelf105 Hz-11.9 dB0.70
High shelf10,000 Hz-3.1 dB0.70
Peak148 Hz-5.1 dB0.72
Peak2,773 Hz+5.5 dB1.13
Peak4,187 Hz+2.4 dB6.00
Peak7,656 Hz+1.9 dB6.00

Warm target

Set a preamp of -3.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 9 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 93 out of 100, up from 80.

FilterFrequencyGainQ
Low shelf105 Hz-0.8 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak134 Hz-3.4 dB0.95
Peak3,884 Hz+3.2 dB2.04

Bass target

Set a preamp of -4.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 9 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 92 out of 100, up from 76.

FilterFrequencyGainQ
Low shelf105 Hz+2.8 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak26 Hz+1.1 dB1.01
Peak142 Hz-3.5 dB0.88
Peak4,040 Hz+4.6 dB1.03

Bright target

Set a preamp of -5.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 9 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 85 out of 100, up from 20.

FilterFrequencyGainQ
Low shelf105 Hz-9.6 dB0.70
High shelf10,000 Hz-5.9 dB0.70
Peak132 Hz-3.5 dB0.72
Peak4,434 Hz+6.0 dB0.90

V-shaped target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 9 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 83 out of 100, up from 65.

FilterFrequencyGainQ
Low shelf105 Hz+3.4 dB0.70
High shelf10,000 Hz-4.3 dB0.70
Peak25 Hz+1.0 dB1.06
Peak123 Hz-2.5 dB1.23
Peak1,032 Hz-1.2 dB2.08
Peak2,443 Hz+1.1 dB1.60
Peak4,708 Hz+6.0 dB0.77
Peak6,695 Hz-1.8 dB6.00

Frequency Response

How the ThieAudio Prestige measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 9 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

ThieAudio PrestigeHarman target
Measured frequency response of the ThieAudio Prestige-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 9 measurements from the squig.link databases of atechreviews, bloomaudio, eliseaudio, hbb, precog, seanwee, sl0the, timmyv and vsg. Thanks to each of them for publishing their work.

More Thieaudio headphones →