Tangzu Li Zhi Review: Ranked #923 of 1291

Last updated: October 17, 2026

The Tangzu Li Zhi ranks #923 out of 1291 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: TANGZU

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#923 Tangzu Li Zhi: 79.00 Linsoul eBay

Pros: A broadly balanced tuning with a preference score of 65 against the Harman target.

Cons: Treble about 3 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.4 dB standard deviation from target.

Is the Tangzu Li Zhi right for you?

Buy it if

  • you are sensitive to bright or sharp treble (treble sits 2.8 dB below target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 28 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $55 less.
BackClosed
ConnectionWired
Deviation From Target2.38 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm CVD diamond crystal evaporated diaphragm dynamic driver
Form FactorIn-ear
Frequency Response20Hz - 20,000Hz
Harman Preference Score65 (median of 5 squig.link measurements, calibrated to AutoEQ)
Impedance18 ohms
Sensitivity107.5 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.2 dB at 30 Hz)
Tonal Tilt-0.81 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 93 out of 100, up from 65.

FilterFrequencyGainQ
High shelf10,000 Hz+1.6 dB0.70
Peak188 Hz-4.0 dB0.62
Peak1,297 Hz-1.0 dB3.78
Peak2,516 Hz+2.2 dB3.26
Peak5,345 Hz+3.3 dB0.46
Peak7,570 Hz-2.0 dB5.25

Neutral target

Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 95 out of 100, up from 31.

FilterFrequencyGainQ
Low shelf105 Hz-8.8 dB0.70
High shelf10,000 Hz+1.6 dB0.70
Peak183 Hz-3.9 dB0.59
Peak1,299 Hz-1.0 dB3.86
Peak2,515 Hz+2.2 dB3.24
Peak5,345 Hz+3.3 dB0.46
Peak7,569 Hz-2.0 dB5.25

Studio flat target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 10.

FilterFrequencyGainQ
Low shelf105 Hz-11.4 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak191 Hz-5.7 dB0.64
Peak2,267 Hz+1.1 dB6.00
Peak2,773 Hz+6.0 dB1.45
Peak5,953 Hz+2.2 dB3.46

Warm target

Set a preamp of -2.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 93 out of 100, up from 77.

FilterFrequencyGainQ
High shelf10,000 Hz-1.3 dB0.70
Peak184 Hz-3.8 dB0.75
Peak2,737 Hz+2.7 dB1.32
Peak5,806 Hz+2.3 dB6.00

Bass target

Set a preamp of -4.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 95 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz+3.5 dB0.70
High shelf10,000 Hz+1.6 dB0.70
Peak32 Hz+1.0 dB1.15
Peak199 Hz-4.0 dB0.70
Peak1,292 Hz-1.1 dB3.62
Peak2,518 Hz+2.2 dB3.29
Peak5,345 Hz+3.3 dB0.46
Peak7,572 Hz-2.0 dB5.24

Bright target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 86 out of 100, up from 19.

FilterFrequencyGainQ
Low shelf105 Hz-8.8 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak182 Hz-3.9 dB0.58
Peak1,299 Hz-1.0 dB3.99
Peak2,445 Hz+1.9 dB3.68
Peak4,419 Hz+5.6 dB0.82
Peak6,971 Hz-1.8 dB6.00

V-shaped target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 82 out of 100, up from 58.

FilterFrequencyGainQ
Low shelf105 Hz+4.2 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak196 Hz-2.6 dB0.64
Peak4,148 Hz+6.0 dB0.83

Frequency Response

How the Tangzu Li Zhi measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 5 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Tangzu Li ZhiHarman target
Measured frequency response of the Tangzu Li Zhi-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 5 measurements from the squig.link databases of bassaudio, csi-zone, dl, soundcheck39 and soundignity. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

4 comparisons

More TANGZU headphones →