TRN MT4 Review: Ranked #616 of 1061

Last updated: October 15, 2026

The TRN MT4 ranks #616 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: TRN

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#616 TRN MT4: $20.99 Amazon $20.99 eBay

Pros: A very cheap dynamic IEM. Measurements show full sub-bass to 20 Hz (score 68 across six measurements).

Cons: A 2.27 dB spread from the target still leaves some peaks and dips.

Is the TRN MT4 right for you?

Buy it if

  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 18 points.

Skip it if

  • you want the best value: the higher-rated TRN MT5 costs about $6 less.
BackClosed
ConnectionWired
Deviation From Target2.27 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic
Form FactorIn-ear
Harman Preference Score68 (median of 6 squig.link measurements, calibrated to AutoEQ)
Impedance22 ohms
Sensitivity115 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.1 dB at 30 Hz)
Tonal Tilt-0.67 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 86 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz-0.9 dB0.70
High shelf10,000 Hz-3.1 dB0.70
Peak34 Hz+0.7 dB1.28
Peak182 Hz-4.2 dB0.78
Peak851 Hz+1.1 dB2.31
Peak2,179 Hz-1.4 dB4.58
Peak3,326 Hz+3.0 dB4.79
Peak4,624 Hz-2.3 dB6.00
Peak5,919 Hz+6.0 dB5.61
Peak7,316 Hz+1.5 dB6.00

Neutral target

Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 34.

FilterFrequencyGainQ
Low shelf105 Hz-9.4 dB0.70
High shelf10,000 Hz-3.1 dB0.70
Peak174 Hz-4.1 dB0.68
Peak851 Hz+1.1 dB2.13
Peak2,184 Hz-1.4 dB4.68
Peak3,325 Hz+3.0 dB4.76
Peak4,624 Hz-2.2 dB6.00
Peak5,919 Hz+6.0 dB5.60
Peak7,317 Hz+1.5 dB6.00

Studio flat target

Set a preamp of -4.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 87 out of 100, up from 14.

FilterFrequencyGainQ
Low shelf105 Hz-11.8 dB0.70
High shelf10,000 Hz+1.6 dB0.70
Peak179 Hz-6.0 dB0.72
Peak890 Hz+1.1 dB2.10
Peak3,047 Hz+4.8 dB3.93
Peak3,562 Hz+1.4 dB6.00
Peak4,611 Hz-4.2 dB6.00
Peak5,992 Hz+4.5 dB6.00
Peak7,450 Hz+1.3 dB6.00

Warm target

Set a preamp of -3.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 90 out of 100, up from 78.

FilterFrequencyGainQ
Low shelf105 Hz-0.7 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak179 Hz-4.0 dB0.81
Peak851 Hz+1.3 dB2.41
Peak2,159 Hz-2.2 dB4.26
Peak3,303 Hz+1.7 dB5.46
Peak4,564 Hz-4.7 dB6.00
Peak6,093 Hz+4.0 dB6.00

Bass target

Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 88 out of 100, up from 71.

FilterFrequencyGainQ
Low shelf105 Hz+2.9 dB0.70
High shelf10,000 Hz-3.1 dB0.70
Peak32 Hz+0.9 dB1.12
Peak185 Hz-4.2 dB0.81
Peak851 Hz+1.1 dB2.35
Peak2,178 Hz-1.4 dB4.54
Peak3,326 Hz+3.0 dB4.80
Peak4,623 Hz-2.3 dB6.00
Peak5,919 Hz+6.0 dB5.61
Peak7,315 Hz+1.5 dB6.00

Bright target

Set a preamp of -4.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 81 out of 100, up from 22.

FilterFrequencyGainQ
Low shelf105 Hz-9.5 dB0.70
High shelf10,000 Hz+0.3 dB0.70
Peak174 Hz-4.2 dB0.68
Peak851 Hz+1.1 dB2.31
Peak2,147 Hz-1.5 dB4.05
Peak3,281 Hz+2.9 dB6.00
Peak5,568 Hz+4.0 dB1.26

V-shaped target

Set a preamp of -4.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 78 out of 100, up from 63.

FilterFrequencyGainQ
Low shelf105 Hz+3.5 dB0.70
High shelf10,000 Hz+1.3 dB0.70
Peak180 Hz-2.8 dB0.84
Peak2,073 Hz-1.3 dB2.78
Peak3,250 Hz+2.4 dB6.00
Peak5,091 Hz+3.9 dB0.92

Frequency Response

How the TRN MT4 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 6 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

TRN MT4Harman target
Measured frequency response of the TRN MT4-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 6 measurements from the squig.link databases of hbb, hore, ianfann, pw, timmyv and tonedeafmonk. Thanks to each of them for publishing their work.

More TRN headphones →