RAAL Requisite 1995 Immanis Review: Ranked #82 of 517

Last updated: October 21, 2026

The RAAL Requisite 1995 Immanis ranks #82 out of 517 total Over-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#82 RAAL Requisite 1995 Immanis: $10200.00 Bloom Audio $10200.00 eBay

Pros: A flagship open back with three true ribbon drivers at about $10200 and a preference score of 86. Bass extends to 20 Hz without boom, and treble above 5 kHz averages close to target.

Cons: Dips of about 5 dB near 1.9 to 2 kHz and a 9.0 dB dip near 9.4 kHz followed by a 7.2 dB peak near 11.2 kHz make the upper range uneven. It needs the included interface plus a powerful amp, weighs 626 g, and the score rests on a single measurement. See headphone amps and DACs with enough power to drive it.

Is the RAAL Requisite 1995 Immanis right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 86).

Skip it if

  • you want more bass (about 3 dB below target).
  • you need isolation or will use it in public: open-back headphones leak sound both ways.
  • you want the best value: the higher-rated Dan Clark Audio E3 costs about $7,901 less.
ReleasedFeb 2024 (2 years ago)
BackOpen
ConnectionWired
Deviation From Target2.35 dB standard deviation
Driver TypeRibbon
Drivers3 x corrugated aluminum true ribbon
Form FactorOver-ear
Harman Preference Score86 (1 squig.link measurement, calibrated to AutoEQ)
Impedance0.057 ohms (0.29 ohms with supplied cable)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-4.6 dB at 30 Hz)
Tonal Tilt-0.05 (negative is warmer, positive brighter)
Weight1.4 lbs (626 g)

EQ Presets

Harman target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 92 out of 100, up from 86.

FilterFrequencyGainQ
Low shelf105 Hz+3.6 dB0.70
High shelf10,000 Hz-4.8 dB0.70
Peak245 Hz-2.2 dB5.07
Peak922 Hz-3.5 dB2.38
Peak1,522 Hz+2.1 dB6.00
Peak1,941 Hz+5.9 dB2.72
Peak3,935 Hz+3.4 dB6.00

Neutral target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 91 out of 100, up from 72.

FilterFrequencyGainQ
Low shelf105 Hz-2.1 dB0.70
High shelf10,000 Hz-4.8 dB0.70
Peak116 Hz-1.7 dB4.36
Peak245 Hz-2.2 dB4.91
Peak923 Hz-3.5 dB2.38
Peak1,522 Hz+2.1 dB6.00
Peak1,941 Hz+5.9 dB2.72
Peak3,935 Hz+3.4 dB6.00

Studio flat target

Set a preamp of -6.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 89 out of 100, up from 39.

FilterFrequencyGainQ
Low shelf105 Hz-4.0 dB0.70
High shelf10,000 Hz+1.6 dB0.70
Peak115 Hz-1.8 dB6.00
Peak211 Hz-2.6 dB0.78
Peak851 Hz-3.5 dB1.12
Peak1,598 Hz+2.4 dB4.63
Peak2,020 Hz+6.0 dB1.70
Peak3,430 Hz+2.3 dB1.32
Peak5,129 Hz-2.8 dB6.00

Warm target

Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 98 out of 100, up from 77.

FilterFrequencyGainQ
Low shelf105 Hz+3.9 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak244 Hz-2.0 dB6.00
Peak938 Hz-3.2 dB2.68
Peak1,509 Hz+2.0 dB6.00
Peak1,874 Hz+5.4 dB3.54
Peak3,085 Hz-1.3 dB6.00
Peak3,968 Hz+1.7 dB6.00
Peak5,394 Hz-3.2 dB3.60

Bass target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 95 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz+6.0 dB0.70
High shelf10,000 Hz-4.8 dB0.70
Peak77 Hz+1.6 dB3.38
Peak245 Hz-2.3 dB6.00
Peak924 Hz-3.5 dB2.41
Peak1,522 Hz+2.0 dB6.00
Peak1,941 Hz+5.9 dB2.72
Peak3,935 Hz+3.3 dB6.00
Peak5,058 Hz-1.3 dB6.00
Peak8,000 Hz+1.7 dB2.75

Bright target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 83 out of 100, up from 54.

FilterFrequencyGainQ
Low shelf105 Hz-2.1 dB0.70
High shelf10,000 Hz-1.0 dB0.70
Peak116 Hz-1.7 dB4.17
Peak245 Hz-2.2 dB4.39
Peak927 Hz-3.9 dB2.29
Peak1,653 Hz+2.0 dB4.63
Peak2,152 Hz+4.9 dB1.43
Peak2,785 Hz-2.2 dB4.68
Peak3,927 Hz+1.8 dB6.00
Peak4,604 Hz+2.8 dB1.48

V-shaped target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 83 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz+6.0 dB0.70
Peak958 Hz-4.7 dB2.75
Peak2,152 Hz+5.3 dB1.36
Peak2,763 Hz-2.1 dB4.57
Peak4,604 Hz+3.3 dB1.54

Frequency Response

How the RAAL Requisite 1995 Immanis measures across the audible range, against the Harman over-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

RAAL Requisite 1995 ImmanisHarman target
Measured frequency response of the RAAL Requisite 1995 Immanis-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: a single measurement from the squig.link database of kr0mka. Thanks to them for publishing their work.