QoA Adonis Review: Ranked #636 of 1061

Last updated: October 15, 2026

The QoA Adonis ranks #636 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: QoA

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#636 QoA Adonis: $181.00 Linsoul $181.00 eBay

Pros: A hybrid with a 9.2mm dynamic driver and two balanced armatures. Measurements show bass and treble both within 1 dB of the Harman target (score 68 across three measurements).

Cons: A 2.44 dB spread from the target shows peaks and dips that better tuned sets avoid. Linsoul sells a revised Adonis New, and it is not confirmed whether it matches the tuning measured here. Its score rests on three measurements.

Is the QoA Adonis right for you?

Buy it if

  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 21 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $157 less.
BackClosed
ConnectionWired
Deviation From Target2.44 dB standard deviation
Driver TypeHybrid
Drivers1 x 9.2mm dynamic + 2 x balanced armature
Form FactorIn-ear
Harman Preference Score68 (median of 3 squig.link measurements, calibrated to AutoEQ)
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.7 dB at 30 Hz)
Tonal Tilt-0.39 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 89 out of 100, up from 68.

FilterFrequencyGainQ
Peak202 Hz-4.2 dB0.70
Peak2,168 Hz+3.0 dB3.33
Peak4,074 Hz+5.7 dB2.17
Peak7,596 Hz-4.3 dB4.50

Neutral target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 92 out of 100, up from 38.

FilterFrequencyGainQ
Low shelf105 Hz-8.5 dB0.70
Peak190 Hz-4.1 dB0.61
Peak2,165 Hz+3.0 dB3.29
Peak4,074 Hz+5.7 dB2.16
Peak7,596 Hz-4.3 dB4.50

Studio flat target

Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 93 out of 100, up from 18.

FilterFrequencyGainQ
Low shelf105 Hz-11.1 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak194 Hz-5.8 dB0.62
Peak2,179 Hz+1.3 dB6.00
Peak2,773 Hz+5.4 dB1.30
Peak4,332 Hz+3.5 dB5.37
Peak5,975 Hz-1.4 dB6.00
Peak7,420 Hz-3.8 dB4.06

Warm target

Set a preamp of -4.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 88 out of 100, up from 73.

FilterFrequencyGainQ
High shelf10,000 Hz-3.5 dB0.70
Peak203 Hz-3.9 dB0.76
Peak2,175 Hz+2.5 dB3.74
Peak4,170 Hz+4.3 dB3.17
Peak6,186 Hz-1.8 dB4.96
Peak7,510 Hz-6.3 dB5.55

Bass target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 90 out of 100, up from 64.

FilterFrequencyGainQ
Low shelf105 Hz+3.8 dB0.70
Peak206 Hz-4.2 dB0.73
Peak2,169 Hz+3.0 dB3.35
Peak4,075 Hz+5.7 dB2.17
Peak7,596 Hz-4.3 dB4.50

Bright target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 94 out of 100, up from 28.

FilterFrequencyGainQ
Low shelf105 Hz-8.6 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak194 Hz-4.1 dB0.59
Peak2,150 Hz+2.3 dB4.59
Peak3,048 Hz-1.4 dB6.00
Peak4,158 Hz+6.0 dB1.17
Peak5,145 Hz+0.8 dB3.55
Peak7,639 Hz-2.0 dB6.00

V-shaped target

Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 91 out of 100, up from 64.

FilterFrequencyGainQ
Low shelf105 Hz+4.4 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak217 Hz-2.7 dB0.64
Peak2,167 Hz+2.2 dB5.46
Peak3,042 Hz-1.5 dB6.00
Peak4,056 Hz+6.0 dB0.96

Frequency Response

How the QoA Adonis measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

QoA AdonisHarman target
Measured frequency response of the QoA Adonis-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of practiphile, soundcheck39 and timmyv. Thanks to each of them for publishing their work.

More QoA headphones →