MEE Audio M6 Pro Review: Ranked #28 of 68

Last updated: October 10, 2026

The MEE Audio M6 Pro ranks #28 out of 68 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: Mee Audio

Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#28 MEE Audio M6 Pro: $39.99 Amazon eBay

Pros: A preference score of 71 in crinacle’s measurement is a decent result for a single 10mm dynamic driver. At 16 ohms and 100 dB/mW it is simple to drive from a phone, and the slightly warm tilt gives a smooth, easy listen. Its rating matches the CCA C12 and KZ ZAX.

Cons: The 100 dB/mW sensitivity is the lowest in this group, so it needs a little more volume than the hybrids. The 2.2 dB deviation from the target leaves audible coloration, and the 7Hz x Crinacle Zero 2 rates higher at a lower price.

BackClosed
ConnectionWired
Deviation From Target2.20 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic
Form FactorIn-ear
Frequency Response20Hz - 20kHz (Manufacturer specified)
Harman Preference Score71 (measured by crinacle, via AutoEQ)
Impedance16 ohms
Sensitivity100 dB/mW
Tonal Tilt-0.39 (negative is warmer, positive brighter)
EQ preset to match the Harman target

Set a preamp of -3.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz+3.2 dB0.70
Peak721 Hz+4.8 dB0.62
Peak92 Hz-4.5 dB0.22
Peak2,434 Hz-4.4 dB2.44
Peak6,340 Hz+3.1 dB5.50
High shelf10,000 Hz+3.4 dB0.70
Peak9,270 Hz+2.2 dB1.90
Peak7,139 Hz-1.9 dB4.63
Peak4,980 Hz-1.9 dB5.48
Peak4,087 Hz+0.6 dB3.54

Head-to-Head Comparisons

2 comparisons

More Mee Audio headphones →