Short answer: the MEE Audio M6 Pro. Both are rated 3.8/5 for sound quality (#327 and #321 of 450 in-ear headphones), and the MEE Audio M6 Pro costs $39.99 against $44.99 for the DUNU Titan X, and with sound quality even, the cheaper one is the better buy.
What the MEE Audio M6 Pro does well: A preference score of 71 in crinacle’s measurement is a decent result for a single 10mm dynamic driver. The tradeoff: The 100 dB/mW sensitivity is the lowest in this group, so it needs a little more volume than the hybrids.
Buy the MEE Audio M6 Pro. Both are rated the same for sound quality, and it costs $5 less than the DUNU Titan X.
Still deciding? The full Headphones rankings cover every ranked option.
Specifications Side By Side
| DUNU Titan X | MEE Audio M6 Pro | |
|---|---|---|
| Price | $44.99 | $39.99 |
| Ranked | #321 of 450 in In-Ear Headphones | #327 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 72 (median of 25 squig.link measurements, calibrated to AutoEQ) | 71 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 2.00 dB standard deviation | 2.20 dB standard deviation |
| Tonal Tilt | -0.63 (negative is warmer, positive brighter) | -0.39 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.6 dB at 30 Hz) | - |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 10mm dynamic | 1 x 10mm dynamic |
| Impedance | 16 ohms | 16 ohms |
| Sensitivity | 123 dB/Vrms | 100 dB/mW |
| Weight | 0 lbs (13 g) per earbud | - |
| Built-in Microphone | Yes | - |
| Frequency Response | - | 20Hz - 20kHz (Manufacturer specified) |
Related Headphone Comparisons
How DUNU Titan X compares with other leading options:
- DUNU Titan X vs Tin HiFi C5
- CCA C12 vs DUNU Titan X
- DUNU Titan X vs CCA C10
- DUNU Titan X vs KZ ZS10 Pro 2
- DUNU Titan X vs KZ ZS10 Pro
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
DUNU Titan X: $44.99 Amazon eBay
Full DUNU Titan X review and specifications →
| Released | 2026 (this year) |
|---|---|
| Back | Closed |
| Built-in Microphone | Yes |
| Connection | Wired |
| Deviation From Target | 2.00 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Harman Preference Score | 72 (median of 25 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 16 ohms |
| Sensitivity | 123 dB/Vrms |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.6 dB at 30 Hz) |
| Tonal Tilt | -0.63 (negative is warmer, positive brighter) |
| Weight | 0 lbs (13 g) per earbud |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
MEE Audio M6 Pro: $39.99 Amazon eBay
Pros: A preference score of 71 in crinacle’s measurement is a decent result for a single 10mm dynamic driver. At 16 ohms and 100 dB/mW it is simple to drive from a phone, and the slightly warm tilt gives a smooth, easy listen. Its rating matches the CCA C12 and KZ ZAX.
Cons: The 100 dB/mW sensitivity is the lowest in this group, so it needs a little more volume than the hybrids. The 2.2 dB deviation from the target leaves audible coloration, and the 7Hz x Crinacle Zero 2 rates higher at a lower price.
Full MEE Audio M6 Pro review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.20 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 71 (measured by crinacle, via AutoEQ) |
| Impedance | 16 ohms |
| Sensitivity | 100 dB/mW |
| Tonal Tilt | -0.39 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -3.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +3.2 dB | 0.70 |
| Peak | 721 Hz | +4.8 dB | 0.62 |
| Peak | 92 Hz | -4.5 dB | 0.22 |
| Peak | 2,434 Hz | -4.4 dB | 2.44 |
| Peak | 6,340 Hz | +3.1 dB | 5.50 |
| High shelf | 10,000 Hz | +3.4 dB | 0.70 |
| Peak | 9,270 Hz | +2.2 dB | 1.90 |
| Peak | 7,139 Hz | -1.9 dB | 4.63 |
| Peak | 4,980 Hz | -1.9 dB | 5.48 |
| Peak | 4,087 Hz | +0.6 dB | 3.54 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons