Short answer: a tie on sound quality. Both are rated 3.8/5 (#322 and #327 of 450 in-ear headphones) at nearly the same price ($36.99 vs $39.99), so choose on features and fit.
What the MEE Audio M6 Pro does well: A preference score of 71 in crinacle’s measurement is a decent result for a single 10mm dynamic driver. The catch: The 100 dB/mW sensitivity is the lowest in this group, so it needs a little more volume than the hybrids.
Buy the 7Hz G1 or the MEE Audio M6 Pro on features: they are rated the same for sound quality at close to the same price.
Still deciding? The full Headphones rankings cover every ranked option.
Specifications Side By Side
| 7Hz G1 | MEE Audio M6 Pro | |
|---|---|---|
| Price | $36.99 | $39.99 |
| Ranked | #322 of 450 in In-Ear Headphones | #327 of 450 in In-Ear Headphones |
| Form Factor | In-ear | In-ear |
| Back | Closed | Closed |
| Harman Preference Score | 72 (median of 14 squig.link measurements, calibrated to AutoEQ) | 71 (measured by crinacle, via AutoEQ) |
| Deviation From Target | 1.95 dB standard deviation | 2.20 dB standard deviation |
| Tonal Tilt | -0.54 (negative is warmer, positive brighter) | -0.39 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+2.4 dB at 30 Hz) | - |
| Connection | Wired | Wired |
| Driver Type | Dynamic | Dynamic |
| Drivers | 1 x 10mm dynamic | 1 x 10mm dynamic |
| Impedance | 18 ohms | 16 ohms |
| Sensitivity | 107 dB/V | 100 dB/mW |
| Weight | 0 lbs (8.8 g) per earbud | - |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) | 20Hz - 20kHz (Manufacturer specified) |
| Built-in Microphone | Yes | - |
Related Headphone Comparisons
More worthwhile head-to-heads for 7Hz G1:
- ZiiGaat Rumba vs 7Hz G1
- Roseselsa Ceramics MK2 vs 7Hz G1
- 7Hz G1 vs Tin HiFi C5
- 7Hz G1 vs Kiwi Ears Belle
- MEE Audio M6 Pro vs Tin HiFi C5
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
7Hz G1: $36.99 Amazon eBay
Full 7Hz G1 review and specifications →
| Released | 2024 (2 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | Yes |
| Connection | Wired |
| Deviation From Target | 1.95 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 10Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 72 (median of 14 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 18 ohms |
| Sensitivity | 107 dB/V |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+2.4 dB at 30 Hz) |
| Tonal Tilt | -0.54 (negative is warmer, positive brighter) |
| Weight | 0 lbs (8.8 g) per earbud |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
MEE Audio M6 Pro: $39.99 Amazon eBay
Pros: A preference score of 71 in crinacle’s measurement is a decent result for a single 10mm dynamic driver. At 16 ohms and 100 dB/mW it is simple to drive from a phone, and the slightly warm tilt gives a smooth, easy listen. Its rating matches the CCA C12 and KZ ZAX.
Cons: The 100 dB/mW sensitivity is the lowest in this group, so it needs a little more volume than the hybrids. The 2.2 dB deviation from the target leaves audible coloration, and the 7Hz x Crinacle Zero 2 rates higher at a lower price.
Full MEE Audio M6 Pro review and specifications →
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.20 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 10mm dynamic |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 71 (measured by crinacle, via AutoEQ) |
| Impedance | 16 ohms |
| Sensitivity | 100 dB/mW |
| Tonal Tilt | -0.39 (negative is warmer, positive brighter) |
EQ preset to match the Harman target
Set a preamp of -3.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +3.2 dB | 0.70 |
| Peak | 721 Hz | +4.8 dB | 0.62 |
| Peak | 92 Hz | -4.5 dB | 0.22 |
| Peak | 2,434 Hz | -4.4 dB | 2.44 |
| Peak | 6,340 Hz | +3.1 dB | 5.50 |
| High shelf | 10,000 Hz | +3.4 dB | 0.70 |
| Peak | 9,270 Hz | +2.2 dB | 1.90 |
| Peak | 7,139 Hz | -1.9 dB | 4.63 |
| Peak | 4,980 Hz | -1.9 dB | 5.48 |
| Peak | 4,087 Hz | +0.6 dB | 3.54 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons