The Kinera Nanna 2.1 Z-Tune Edition ranks #242 out of 1476 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: Kinera
Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.

#242 Kinera Nanna 2.1 Z-Tune Edition: $949 eBay
Pros: A dynamic, balanced armature and two electrostatic tribrid with a preference score of 78 and bass exactly on target to 20 Hz. The cable comes with swappable 3.5, 2.5 and 4.4 mm plugs.
Cons: Presence sits 3.3 dB low with a 6.1 dB dip near 3.5 kHz, and a 5.7 dB peak near 8.2 kHz follows, so vocals can sound recessed while hi hats stand out. It was limited to 500 units at $949, and the score rests on a single measurement.
Is the Kinera Nanna 2.1 Z-Tune Edition right for you?
Buy it if
- you want the tuning most listeners prefer in blind tests out of the box (Harman score 78).
- you want sub-bass rumble that reaches down to 20 Hz.
Skip it if
- you want the best value: the higher-rated QCY HT05 MeloBuds ANC costs about $915 less.
| Released | Jan 2023 (3 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 1.93 dB standard deviation |
| Driver Type | Tribrid (dynamic + balanced armature + electrostatic) |
| Drivers | 1 x 7mm dynamic + 1 x Sonion balanced armature + 2 x Sonion electrostatic |
| Form Factor | In-ear |
| Frequency Response | 5Hz - 50kHz (Manufacturer specified) |
| Harman Preference Score | 78 (1 squig.link measurement, calibrated to AutoEQ) |
| Impedance | 60 ohms |
| Sensitivity | 110 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.0 dB at 30 Hz) |
| Tonal Tilt | -0.14 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 94 out of 100, up from 78.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +0.7 dB | 0.70 |
| High shelf | 10,000 Hz | -5.0 dB | 0.70 |
| Peak | 736 Hz | +1.5 dB | 2.92 |
| Peak | 1,502 Hz | -2.1 dB | 2.76 |
| Peak | 2,927 Hz | +1.4 dB | 5.61 |
| Peak | 3,548 Hz | +6.0 dB | 1.79 |
| Peak | 6,043 Hz | +2.0 dB | 6.00 |
| Peak | 8,000 Hz | -2.4 dB | 6.00 |
Neutral target
Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 89 out of 100, up from 44.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -7.8 dB | 0.70 |
| High shelf | 10,000 Hz | -5.0 dB | 0.70 |
| Peak | 3,548 Hz | +6.0 dB | 1.78 |
| Peak | 6,043 Hz | +2.0 dB | 6.00 |
Studio flat target
Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 90 out of 100, up from 26.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -10.4 dB | 0.70 |
| High shelf | 10,000 Hz | +1.3 dB | 0.70 |
| Peak | 192 Hz | -2.5 dB | 0.97 |
| Peak | 3,148 Hz | +6.0 dB | 1.74 |
| Peak | 3,865 Hz | +2.0 dB | 6.00 |
| Peak | 8,000 Hz | -2.4 dB | 4.34 |
Warm target
Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 92 out of 100, up from 76.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +0.9 dB | 0.70 |
| High shelf | 10,000 Hz | -6.0 dB | 0.70 |
| Peak | 720 Hz | +1.8 dB | 2.34 |
| Peak | 1,560 Hz | -2.1 dB | 2.96 |
| Peak | 3,426 Hz | +5.8 dB | 3.17 |
| Peak | 8,000 Hz | -4.6 dB | 4.33 |
Bass target
Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 88 out of 100, up from 68.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +4.5 dB | 0.70 |
| High shelf | 10,000 Hz | -5.0 dB | 0.70 |
| Peak | 3,548 Hz | +6.0 dB | 1.79 |
| Peak | 6,043 Hz | +2.0 dB | 6.00 |
Bright target
Set a preamp of -6.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 89 out of 100, up from 35.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -7.9 dB | 0.70 |
| High shelf | 10,000 Hz | -1.1 dB | 0.70 |
| Peak | 739 Hz | +1.4 dB | 3.19 |
| Peak | 1,522 Hz | -2.5 dB | 2.38 |
| Peak | 3,158 Hz | +3.3 dB | 4.18 |
| Peak | 3,960 Hz | +1.3 dB | 5.77 |
| Peak | 5,345 Hz | +5.2 dB | 0.67 |
| Peak | 7,154 Hz | -2.7 dB | 3.52 |
V-shaped target
Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 88 out of 100, up from 69.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +5.2 dB | 0.70 |
| High shelf | 10,000 Hz | +0.4 dB | 0.70 |
| Peak | 1,471 Hz | -2.9 dB | 2.13 |
| Peak | 3,354 Hz | +6.0 dB | 1.13 |
| Peak | 5,675 Hz | +4.0 dB | 4.35 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the Kinera Nanna 2.1 Z-Tune Edition measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: a single measurement from the squig.link database of vsg. Thanks to them for publishing their work.