KZ PR1 Review: Ranked #40 of 68

Last updated: October 10, 2026

The KZ PR1 ranks #40 out of 68 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: KZ

Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#40 KZ PR1: $87.99 Amazon eBay

Pros: The 13.2 mm planar magnetic driver is an unusual choice at this size, and Crinacle’s measurement gives a Harman preference score of 67 with a deviation of 2.36 dB. The 16 ohm impedance suits portable sources, and the 20 Hz to 40 kHz claimed range is wide.

Cons: Sensitivity of 96 dB is low for an in-ear, so volume headroom from a phone can be limited and a stronger source helps. A tilt of 0.76 dB toward the warm side gives a darker balance than the target. The TFZ T2 Galaxy is rated higher and costs less. No microphone is listed.

BackClosed
ConnectionWired
Deviation From Target2.36 dB standard deviation
Driver TypePlanar magnetic
Drivers1 x 13.2mm planar magnetic
Form FactorIn-ear
Frequency Response20Hz - 40kHz (Manufacturer specified)
Harman Preference Score67 (measured by crinacle, via AutoEQ)
Impedance16 ohms
Sensitivity96 dB
Tonal Tilt-0.76 (negative is warmer, positive brighter)
EQ preset to match the Harman target

Set a preamp of -3.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.

FilterFrequencyGainQ
Low shelf105 Hz-1.7 dB0.70
Peak171 Hz-3.5 dB0.86
Peak819 Hz+3.1 dB1.02
Peak4,351 Hz+4.0 dB1.33
Peak2,387 Hz-2.6 dB1.15
High shelf10,000 Hz-15.5 dB0.70
Peak6,790 Hz+4.5 dB2.11
Peak5,647 Hz-2.4 dB4.34
Peak9,447 Hz+3.7 dB2.87
Peak65 Hz+0.2 dB2.39

More KZ headphones →