JBL Tune 710BT Review: Ranked #34 of 512

Last updated: October 20, 2026

The JBL Tune 710BT ranks #34 out of 512 total Over-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: JBL

Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#34 JBL Tune 710BT: $59.54 Wireless Amazon $59.54 eBay

Pros: A budget wireless headphone at about $60 with a preference score of 89 and 50 hours of battery. Sub bass, bass and lower mids sit within 1 dB of target, so bass is full and natural, and it weighs a light 220 g.

Cons: There is no ANC and only SBC. Presence dips 9 dB near 4.6 kHz and a 13 dB dip near 10.6 kHz removes air, so detail sounds a little muted, and the score rests on a single measurement.

Is the JBL Tune 710BT right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 89).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you want long battery life (claimed 50 hours).
Released2021 (5 years ago)
Active Noise CancellingNo
BackClosed
Battery Life50 hours
Bluetooth CodecsSBC
Bluetooth Version5.0
Built-in MicrophoneYes
ConnectionWireless and wired
Deviation From Target1.93 dB standard deviation
Driver TypeDynamic
Drivers1 x 40mm dynamic
Form FactorOver-ear
Frequency Response20Hz - 20kHz (Manufacturer specified)
Harman Preference Score89 (1 squig.link measurement, calibrated to AutoEQ)
Impedance32 ohms
Sensitivity103 dB @ 1kHz/1mW
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-1.0 dB at 30 Hz)
Tonal Tilt-0.18 (negative is warmer, positive brighter)
Weight0.5 lbs (220 g)

EQ Presets

Harman target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 100 out of 100, up from 89.

FilterFrequencyGainQ
Low shelf105 Hz+0.3 dB0.70
High shelf10,000 Hz-4.2 dB0.70
Peak207 Hz+1.3 dB3.30
Peak1,638 Hz+2.1 dB4.72
Peak2,821 Hz-2.3 dB6.00
Peak4,446 Hz+6.0 dB3.29
Peak6,265 Hz-2.0 dB6.00

Neutral target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 100 out of 100, up from 66.

FilterFrequencyGainQ
Low shelf105 Hz-5.4 dB0.70
High shelf10,000 Hz-4.2 dB0.70
Peak56 Hz-1.0 dB1.78
Peak206 Hz+1.4 dB3.06
Peak642 Hz-1.2 dB1.93
Peak1,638 Hz+2.1 dB4.71
Peak2,821 Hz-2.3 dB6.00
Peak4,446 Hz+6.0 dB3.29
Peak6,265 Hz-2.0 dB6.00

Studio flat target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 100 out of 100, up from 39.

FilterFrequencyGainQ
Low shelf105 Hz-7.3 dB0.70
High shelf10,000 Hz+1.5 dB0.70
Peak108 Hz-1.7 dB5.17
Peak398 Hz-1.7 dB0.41
Peak1,580 Hz+1.6 dB6.00
Peak1,872 Hz+3.5 dB3.30
Peak4,082 Hz+6.0 dB1.94
Peak4,893 Hz+2.0 dB6.00
Peak6,311 Hz-3.2 dB4.90

Warm target

Set a preamp of -4.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 100 out of 100, up from 82.

FilterFrequencyGainQ
Low shelf105 Hz+0.5 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak208 Hz+1.5 dB2.36
Peak1,610 Hz+1.8 dB6.00
Peak2,767 Hz-3.3 dB5.44
Peak4,486 Hz+6.0 dB5.92
Peak6,779 Hz-3.7 dB3.03

Bass target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 100 out of 100, up from 82.

FilterFrequencyGainQ
Low shelf105 Hz+4.1 dB0.70
High shelf10,000 Hz-4.2 dB0.70
Peak206 Hz+1.3 dB3.09
Peak1,638 Hz+2.1 dB4.73
Peak2,821 Hz-2.3 dB6.00
Peak4,447 Hz+6.0 dB3.29
Peak6,265 Hz-2.0 dB6.00

Bright target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 97 out of 100, up from 48.

FilterFrequencyGainQ
Low shelf105 Hz-5.4 dB0.70
High shelf10,000 Hz-0.7 dB0.70
Peak56 Hz-1.1 dB1.68
Peak206 Hz+1.3 dB3.29
Peak648 Hz-1.3 dB1.77
Peak1,633 Hz+2.0 dB5.24
Peak2,771 Hz-2.2 dB6.00
Peak3,860 Hz+2.0 dB6.00
Peak4,708 Hz+6.0 dB1.75

V-shaped target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 92 out of 100, up from 78.

FilterFrequencyGainQ
Low shelf105 Hz+4.7 dB0.70
High shelf10,000 Hz+0.5 dB0.70
Peak203 Hz+2.5 dB1.35
Peak746 Hz-1.5 dB1.98
Peak1,662 Hz+1.9 dB5.22
Peak2,871 Hz-2.4 dB6.00
Peak4,321 Hz+6.0 dB1.61
Peak5,191 Hz+1.7 dB6.00

Frequency Response

How the JBL Tune 710BT measures across the audible range, against the Harman over-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

JBL Tune 710BTHarman target
Measured frequency response of the JBL Tune 710BT-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: a single measurement from the squig.link database of suporsalad. Thanks to them for publishing their work.

More JBL headphones →