I/O Audio Volare Review: Ranked #10 of 1476

Last updated: October 21, 2026

The I/O Audio Volare ranks #10 out of 1476 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

I/O Audio Volare - ranked #10 of 1476 In-Ear Headphones · Editor's rating 4.9/5

#10 I/O Audio Volare: $599 eBay

Pros: A dynamic, four balanced armature and four electrostatic flagship with a preference score of 87 and only 0.96 dB average deviation from target, one of the most accurate tunings measured. Bass, midrange and treble all stay within about 1 dB of target, and it ships with swappable 3.5, 2.5 and 4.4 mm plugs.

Cons: It is sold out at $599, with only backorders available. The 4.8 ohm impedance and 121 dB/Vrms sensitivity can expose hiss from noisy sources, and the score rests on a single measurement.

Is the I/O Audio Volare right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 87).
  • you want sub-bass rumble that reaches down to 20 Hz.
BackClosed
ConnectionWired
Deviation From Target0.96 dB standard deviation
Driver TypeTribrid (dynamic + balanced armature + electrostatic)
Drivers1 x dynamic + 4 x balanced armature + 4 x electrostatic
Form FactorIn-ear
Frequency Response10Hz - 40kHz (Manufacturer specified)
Harman Preference Score87 (1 squig.link measurement, calibrated to AutoEQ)
Impedance4.8 ohms
Sensitivity121 dB/Vrms
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-0.0 dB at 30 Hz)
Tonal Tilt-0.12 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -2.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 93 out of 100, up from 87.

FilterFrequencyGainQ
Low shelf105 Hz+0.3 dB0.70
High shelf10,000 Hz-2.8 dB0.70
Peak212 Hz-1.2 dB1.53
Peak687 Hz+0.9 dB2.43
Peak1,376 Hz-1.1 dB4.00
Peak3,286 Hz+1.0 dB2.62
Peak5,345 Hz+2.2 dB1.25
Peak7,529 Hz-1.9 dB6.00

Neutral target

Set a preamp of -2.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 95 out of 100, up from 49.

FilterFrequencyGainQ
Low shelf105 Hz-8.2 dB0.70
High shelf10,000 Hz-2.8 dB0.70
Peak23 Hz-0.7 dB0.87
Peak198 Hz-1.1 dB1.01
Peak671 Hz+0.9 dB2.19
Peak1,380 Hz-1.1 dB4.10
Peak3,284 Hz+0.9 dB2.60
Peak5,345 Hz+2.2 dB1.25
Peak7,529 Hz-1.9 dB6.00

Studio flat target

Set a preamp of -3.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 93 out of 100, up from 30.

FilterFrequencyGainQ
Low shelf105 Hz-10.8 dB0.70
High shelf10,000 Hz+1.5 dB0.70
Peak25 Hz-1.2 dB1.68
Peak190 Hz-2.9 dB0.84
Peak2,908 Hz+3.8 dB1.99

Warm target

Set a preamp of -1.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 95 out of 100, up from 85.

FilterFrequencyGainQ
Low shelf105 Hz+0.6 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak214 Hz-0.9 dB1.61
Peak711 Hz+1.2 dB2.48
Peak1,555 Hz-1.3 dB2.90
Peak7,526 Hz-3.0 dB6.00

Bass target

Set a preamp of -4.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 95 out of 100, up from 76.

FilterFrequencyGainQ
Low shelf105 Hz+4.1 dB0.70
High shelf10,000 Hz-2.8 dB0.70
Peak46 Hz+0.5 dB1.85
Peak218 Hz-1.2 dB1.72
Peak689 Hz+0.8 dB2.47
Peak1,376 Hz-1.1 dB3.98
Peak3,287 Hz+1.0 dB2.63
Peak5,345 Hz+2.2 dB1.25
Peak7,529 Hz-1.9 dB6.00

Bright target

Set a preamp of -4.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 92 out of 100, up from 38.

FilterFrequencyGainQ
Low shelf105 Hz-8.3 dB0.70
High shelf10,000 Hz+0.8 dB0.70
Peak23 Hz-0.7 dB1.08
Peak198 Hz-1.1 dB0.98
Peak669 Hz+0.8 dB2.29
Peak1,394 Hz-1.2 dB3.60
Peak3,391 Hz+1.1 dB2.66
Peak5,345 Hz+4.8 dB1.17
Peak6,794 Hz-1.6 dB6.00

V-shaped target

Set a preamp of -5.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 89 out of 100, up from 74.

FilterFrequencyGainQ
Low shelf105 Hz+4.8 dB0.70
High shelf10,000 Hz+1.7 dB0.70
Peak424 Hz+0.7 dB0.73
Peak1,292 Hz-1.5 dB3.61
Peak3,041 Hz+1.0 dB2.52
Peak5,016 Hz+5.4 dB1.17
Peak6,824 Hz-1.6 dB6.00

Frequency Response

How the I/O Audio Volare measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

I/O Audio VolareHarman target
Measured frequency response of the I/O Audio Volare-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: a single measurement from the squig.link database of dentreviews. Thanks to them for publishing their work.