The FiiO x JadeAudio JH5 ranks #895 out of 1291 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: Fiio
Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#895 FiiO x JadeAudio JH5: 9.99 Amazon eBay
Pros: A broadly balanced tuning with a preference score of 66 against the Harman target.
Cons: Treble about 2 dB below target from 3 to 10 kHz, which can sound dull or veiled next to brighter headphones. An uneven response, 2.4 dB standard deviation from target.
Is the FiiO x JadeAudio JH5 right for you?
Buy it if
- you are sensitive to bright or sharp treble (treble sits 2.0 dB below target).
- you want sub-bass rumble that reaches down to 20 Hz.
- you are happy to use EQ: our preset lifts its Harman match by about 24 points.
| Back | Closed |
|---|---|
| Connection | Wired |
| Deviation From Target | 2.43 dB standard deviation |
| Driver Type | Hybrid |
| Drivers | 1 DD + 4 BA (1 x 10mm carbon-based dynamic driver + 4 x custom balanced armatures) |
| Form Factor | In-ear |
| Frequency Response | 20Hz - 40,000Hz |
| Harman Preference Score | 66 (median of 5 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 13 ohms |
| Sensitivity | 111 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-1.9 dB at 30 Hz) |
| Tonal Tilt | -0.69 (negative is warmer, positive brighter) |
| Weight | 0 lbs (7.6 g) (per earpiece) |
EQ Presets
Harman target
Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 66.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -0.4 dB | 0.70 |
| High shelf | 10,000 Hz | -0.7 dB | 0.70 |
| Peak | 198 Hz | -4.8 dB | 0.65 |
| Peak | 1,825 Hz | +3.1 dB | 3.16 |
| Peak | 2,608 Hz | -1.7 dB | 6.00 |
| Peak | 3,490 Hz | +1.7 dB | 6.00 |
| Peak | 5,327 Hz | +6.0 dB | 4.91 |
Neutral target
Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 91 out of 100, up from 34.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -8.9 dB | 0.70 |
| High shelf | 10,000 Hz | -0.7 dB | 0.70 |
| Peak | 187 Hz | -4.7 dB | 0.58 |
| Peak | 1,823 Hz | +3.1 dB | 3.10 |
| Peak | 2,608 Hz | -1.7 dB | 6.00 |
| Peak | 3,490 Hz | +1.7 dB | 6.00 |
| Peak | 5,327 Hz | +6.0 dB | 4.90 |
Studio flat target
Set a preamp of -2.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 86 out of 100, up from 13.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -11.5 dB | 0.70 |
| High shelf | 10,000 Hz | +2.0 dB | 0.70 |
| Peak | 191 Hz | -6.6 dB | 0.65 |
| Peak | 4,708 Hz | +2.4 dB | 0.40 |
Warm target
Set a preamp of -3.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 92 out of 100, up from 76.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| High shelf | 10,000 Hz | -4.2 dB | 0.70 |
| Peak | 25 Hz | +0.9 dB | 1.13 |
| Peak | 192 Hz | -4.6 dB | 0.64 |
| Peak | 1,808 Hz | +2.5 dB | 3.44 |
| Peak | 2,670 Hz | -2.1 dB | 6.00 |
| Peak | 5,309 Hz | +3.5 dB | 6.00 |
Bass target
Set a preamp of -6.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 90 out of 100, up from 67.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +3.4 dB | 0.70 |
| High shelf | 10,000 Hz | -0.7 dB | 0.70 |
| Peak | 201 Hz | -4.8 dB | 0.67 |
| Peak | 1,826 Hz | +3.1 dB | 3.18 |
| Peak | 2,608 Hz | -1.7 dB | 6.00 |
| Peak | 3,490 Hz | +1.7 dB | 6.00 |
| Peak | 5,327 Hz | +6.0 dB | 4.91 |
Bright target
Set a preamp of -4.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 85 out of 100, up from 21.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -9.0 dB | 0.70 |
| High shelf | 10,000 Hz | +2.0 dB | 0.70 |
| Peak | 198 Hz | -4.8 dB | 0.57 |
| Peak | 1,812 Hz | +2.8 dB | 3.73 |
| Peak | 2,607 Hz | -1.8 dB | 6.00 |
| Peak | 5,017 Hz | +4.6 dB | 1.23 |
V-shaped target
Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 5 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 82 out of 100, up from 58.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +4.1 dB | 0.70 |
| High shelf | 10,000 Hz | +2.0 dB | 0.70 |
| Peak | 204 Hz | -3.4 dB | 0.59 |
| Peak | 1,852 Hz | +2.9 dB | 4.61 |
| Peak | 2,625 Hz | -1.8 dB | 6.00 |
| Peak | 4,767 Hz | +4.6 dB | 0.97 |
| Peak | 5,474 Hz | +1.5 dB | 6.00 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the FiiO x JadeAudio JH5 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 5 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: median of 5 measurements from the squig.link databases of ekaudio, flare, iemocean, joshtbvo and superreview. Thanks to each of them for publishing their work.