The FiiO FT1 Pro ranks #26 out of 134 total Over-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: Fiio
Prices on this page were last checked October 10, 2026 at 5:37 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#26 FiiO FT1 Pro: $219.99 Amazon eBay
Pros: Planar magnetic drivers with a 20 ohm impedance and 95 dB per milliwatt sensitivity make it easy to drive from a dongle or phone while delivering a preference score of 86. Bass from 60 to 200 Hz is essentially on target and sub-bass is only about 2.5 dB light, giving clean, controlled low end. Its rating matches the Audio-Technica ATH-M70x and Beyerdynamic TYGR 300 R, with a lower price than the M70x.
Cons: A 10 dB dip near 9.6 kHz and treble about 1 dB low soften cymbals and the upper edge of vocals, while a 3.5 dB peak near 2.9 kHz can add some forwardness. Low mids run about 1.6 dB above target, which adds a touch of thickness. At 374 g it is fairly heavy, and the open back leaks sound.
| Released | Nov 2024 (1 year ago) |
|---|---|
| Back | Open |
| Connection | Wired |
| Deviation From Target | 2.16 dB standard deviation |
| Driver Type | Planar magnetic |
| Drivers | 1 x 95x86mm planar magnetic |
| Form Factor | Over-ear |
| Frequency Response | 7Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 86 (measured by oratory1990, via AutoEQ) |
| Impedance | 20 ohms |
| Sensitivity | 95 dB/mW |
| Tonal Tilt | -0.07 (negative is warmer, positive brighter) |
| Weight | 0.8 lbs (374 g) |
EQ preset to match the Harman target
Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +4.2 dB | 0.70 |
| Peak | 162 Hz | -1.5 dB | 0.18 |
| Peak | 1,818 Hz | +4.7 dB | 2.03 |
| Peak | 2,815 Hz | -3.9 dB | 3.58 |
| Peak | 9,183 Hz | +1.7 dB | 2.62 |
| High shelf | 10,000 Hz | -1.4 dB | 0.70 |
| Peak | 5,731 Hz | -2.5 dB | 5.92 |
| Peak | 35 Hz | -0.6 dB | 2.36 |
| Peak | 100 Hz | +0.3 dB | 1.53 |
| Peak | 3,839 Hz | +1.7 dB | 6.00 |
- Reviews, Comparisons and Sound Samples