Short answer: the FiiO FT1 Pro. It ranks #36 of 216 over-ear headphones by sound quality, rated 4.2/5, at $219.99; the Sivga Oriole ranks #58, rated 4.1/5, and costs $239, so there is not much of a tradeoff to weigh.
What the FiiO FT1 Pro does well: Planar magnetic drivers with a 20 ohm impedance and 95 dB per milliwatt sensitivity make it easy to drive from a dongle or phone while delivering a preference score of 86. Watch for: A 10 dB dip near 9.6 kHz and treble about 1 dB low soften cymbals and the upper edge of vocals, while a 3.5 dB peak near 2.9 kHz can add some forwardness.
The case for the Sivga Oriole: A preference score of 83 from a closed back design, with sub-bass extension right on target at 30 Hz, so it delivers deep, solid bass while blocking outside noise. Watch for: An 8.5 dB dip near 5.6 kHz pulls the presence band 3.8 dB below target, softening vocal clarity and the attack of guitars and snares.
Buy the FiiO FT1 Pro. It is rated higher for sound quality than the Sivga Oriole and costs less, which makes it the one to get unless you need something the other one does better.
Still deciding? The full Headphones rankings cover every ranked option.
Specifications Side By Side
| FiiO FT1 Pro | Sivga Oriole | |
|---|---|---|
| Price | $219.99 | $239.00 |
| Ranked | #36 of 216 in Over-Ear Headphones | #58 of 216 in Over-Ear Headphones |
| Form Factor | Over-ear | Over-ear |
| Harman Preference Score | 86 (measured by oratory1990, via AutoEQ) | 83 (measured by oratory1990, via AutoEQ) |
| Deviation From Target | 2.16 dB standard deviation | 2.28 dB standard deviation |
| Tonal Tilt | -0.07 (negative is warmer, positive brighter) | -0.20 (negative is warmer, positive brighter) |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-3.7 dB at 30 Hz) | Within 6 dB of target down to 20 Hz (+0.4 dB at 30 Hz) |
| Connection | Wired | Wired |
| Back | Open | Closed |
| Driver Type | Planar magnetic | Dynamic |
| Drivers | 1 x 95x86mm planar magnetic | 1 x 50mm dynamic |
| Impedance | 20 ohms | 32 ohms |
| Sensitivity | 95 dB/mW | 108 dB |
| Weight | 0.8 lbs (374 g) | 0.6 lbs (280 g) |
| Frequency Response | 7Hz - 40kHz (Manufacturer specified) | 20Hz - 20kHz (Manufacturer specified) |
| Built-in Microphone | - | No |
Related Headphone Comparisons
More top alternatives to FiiO FT1 Pro:
- Sennheiser HD 505 vs FiiO FT1 Pro
- FiiO FT1 Pro vs FiiO FT3
- FiiO FT3 vs Sivga Oriole
- AKG K701 vs Sivga Oriole
- AKG K702 vs Sivga Oriole
Prices on this page were last checked October 11, 2026 at 4:59 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Headphones In Full
FiiO FT1 Pro: $219.99 Amazon AliExpress eBay
Pros: Planar magnetic drivers with a 20 ohm impedance and 95 dB per milliwatt sensitivity make it easy to drive from a dongle or phone while delivering a preference score of 86. Bass from 60 to 200 Hz is essentially on target and sub-bass is only about 2.5 dB light, giving clean, controlled low end. Its rating matches the Audio-Technica ATH-M70x and Beyerdynamic TYGR 300 R, with a lower price than the M70x.
Cons: A 10 dB dip near 9.6 kHz and treble about 1 dB low soften cymbals and the upper edge of vocals, while a 3.5 dB peak near 2.9 kHz can add some forwardness. Low mids run about 1.6 dB above target, which adds a touch of thickness. At 374 g it is fairly heavy, and the open back leaks sound.
Full FiiO FT1 Pro review and specifications →
| Released | Nov 2024 (1 year ago) |
|---|---|
| Back | Open |
| Connection | Wired |
| Deviation From Target | 2.16 dB standard deviation |
| Driver Type | Planar magnetic |
| Drivers | 1 x 95x86mm planar magnetic |
| Form Factor | Over-ear |
| Frequency Response | 7Hz - 40kHz (Manufacturer specified) |
| Harman Preference Score | 86 (measured by oratory1990, via AutoEQ) |
| Impedance | 20 ohms |
| Sensitivity | 95 dB/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-3.7 dB at 30 Hz) |
| Tonal Tilt | -0.07 (negative is warmer, positive brighter) |
| Weight | 0.8 lbs (374 g) |
EQ preset to match the Harman target
Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +4.2 dB | 0.70 |
| Peak | 162 Hz | -1.5 dB | 0.18 |
| Peak | 1,818 Hz | +4.7 dB | 2.03 |
| Peak | 2,815 Hz | -3.9 dB | 3.58 |
| Peak | 9,183 Hz | +1.7 dB | 2.62 |
| High shelf | 10,000 Hz | -1.4 dB | 0.70 |
| Peak | 5,731 Hz | -2.5 dB | 5.92 |
| Peak | 35 Hz | -0.6 dB | 2.36 |
| Peak | 100 Hz | +0.3 dB | 1.53 |
| Peak | 3,839 Hz | +1.7 dB | 6.00 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
Sivga Oriole: $239.00 HiFiGo eBay
Pros: A preference score of 83 from a closed back design, with sub-bass extension right on target at 30 Hz, so it delivers deep, solid bass while blocking outside noise. Its 32 ohm impedance and 108 dB sensitivity mean a phone or laptop drives it to full volume without an amp. At 280 g it is light, and the bassy, warm balance suits listeners who like a fuller sound.
Cons: An 8.5 dB dip near 5.6 kHz pulls the presence band 3.8 dB below target, softening vocal clarity and the attack of guitars and snares. Low mids sit 2 dB under target, which can thin out the body of voices slightly. The AKG K371 shares the same rating at a much lower price.
Full Sivga Oriole review and specifications →
| Released | Oct 2022 (4 years ago) |
|---|---|
| Back | Closed |
| Built-in Microphone | No |
| Connection | Wired |
| Deviation From Target | 2.28 dB standard deviation |
| Driver Type | Dynamic |
| Drivers | 1 x 50mm dynamic |
| Form Factor | Over-ear |
| Frequency Response | 20Hz - 20kHz (Manufacturer specified) |
| Harman Preference Score | 83 (measured by oratory1990, via AutoEQ) |
| Impedance | 32 ohms |
| Sensitivity | 108 dB |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (+0.4 dB at 30 Hz) |
| Tonal Tilt | -0.20 (negative is warmer, positive brighter) |
| Weight | 0.6 lbs (280 g) |
EQ preset to match the Harman target
Set a preamp of -5.7 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by AutoEQ from its measured frequency response.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -1.1 dB | 0.70 |
| Peak | 1,128 Hz | -2.9 dB | 1.10 |
| Peak | 203 Hz | +8.6 dB | 1.90 |
| Peak | 5,371 Hz | +5.2 dB | 3.75 |
| Peak | 145 Hz | -3.3 dB | 0.66 |
| High shelf | 10,000 Hz | -8.7 dB | 0.70 |
| Peak | 9,481 Hz | +2.5 dB | 0.88 |
| Peak | 46 Hz | -1.1 dB | 2.44 |
| Peak | 3,926 Hz | -1.7 dB | 5.44 |
| Peak | 80 Hz | +0.9 dB | 2.91 |
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons