EarFun Air Pro 2 Review: Ranked #302 of 1490

Last updated: October 20, 2026

The EarFun Air Pro 2 ranks #302 out of 1490 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: EarFun

Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

EarFun Air Pro 2 - ranked #302 of 1490 In-Ear Headphones · Editor's rating 4.3/5

#302 EarFun Air Pro 2: $79.99 Wireless Discontinued eBay

Pros: Budget wireless ANC earbuds with a preference score of 77 and bass boosted about 3 dB down to 20 Hz. Battery life is 7 hours (27 with the case), and they are rated IPX5.

Cons: A 5 dB peak near 9.4 kHz adds some sizzle, and the warm tilt (minus 0.56) can sound heavy. They are discontinued and replaced by the EarFun Air Pro 4, and the score rests on a single measurement.

Is the EarFun Air Pro 2 right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 77).
  • your taste runs bass-heavy: it scores 86 for that sound.
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you want noise cancelling for commutes or flights.

Skip it if

  • you want to buy it new: it is discontinued.
ReleasedSep 2021 (5 years ago)
Active Noise CancellingYes
BackClosed
Battery Life7 hours; 27 hours with case
Bluetooth CodecsSBC, AAC
Bluetooth Version5.2
ConnectionWireless
Deviation From Target1.69 dB standard deviation
Driver TypeDynamic
Drivers1 x 10mm dynamic per earbud
Form FactorIn-ear
Harman Preference Score77 (1 squig.link measurement, calibrated to AutoEQ)
IP RatingIPX5
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+3.1 dB at 30 Hz)
Tonal Tilt-0.56 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -2.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 91 out of 100, up from 77.

FilterFrequencyGainQ
Low shelf105 Hz-2.8 dB0.70
High shelf10,000 Hz-0.5 dB0.70
Peak2,918 Hz+1.0 dB2.35
Peak5,345 Hz+2.8 dB2.72
Peak7,645 Hz-3.1 dB6.00

Neutral target

Set a preamp of -2.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 92 out of 100, up from 34.

FilterFrequencyGainQ
Low shelf105 Hz-11.2 dB0.70
High shelf10,000 Hz-0.5 dB0.70
Peak33 Hz-0.8 dB0.40
Peak2,917 Hz+1.1 dB2.35
Peak5,345 Hz+2.8 dB2.71
Peak7,645 Hz-3.1 dB6.00

Studio flat target

Set a preamp of -4.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 88 out of 100, up from 16.

FilterFrequencyGainQ
Low shelf105 Hz-11.9 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak124 Hz-2.5 dB0.50
Peak356 Hz-0.8 dB3.57
Peak2,749 Hz+3.9 dB2.24
Peak5,825 Hz+1.5 dB6.00
Peak7,611 Hz-2.3 dB6.00

Warm target

Set a preamp of -0.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 88 out of 100, up from 80.

FilterFrequencyGainQ
Low shelf105 Hz-2.6 dB0.70
High shelf10,000 Hz-3.5 dB0.70
Peak7,591 Hz-4.9 dB5.44

Bass target

Set a preamp of -2.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 91 out of 100, up from 86.

FilterFrequencyGainQ
Low shelf105 Hz+0.9 dB0.70
High shelf10,000 Hz-0.5 dB0.70
Peak2,920 Hz+1.0 dB2.35
Peak5,345 Hz+2.8 dB2.72
Peak7,645 Hz-3.1 dB6.00

Bright target

Set a preamp of -5.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 92 out of 100, up from 25.

FilterFrequencyGainQ
Low shelf105 Hz-11.3 dB0.70
High shelf10,000 Hz+1.4 dB0.70
Peak2,846 Hz+1.1 dB3.21
Peak5,345 Hz+5.3 dB1.50
Peak6,757 Hz-1.6 dB6.00

V-shaped target

Set a preamp of -5.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 92 out of 100, up from 80.

FilterFrequencyGainQ
Low shelf105 Hz+1.6 dB0.70
High shelf10,000 Hz+1.8 dB0.70
Peak5,016 Hz+5.6 dB1.32

Frequency Response

How the EarFun Air Pro 2 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

EarFun Air Pro 2Harman target
Measured frequency response of the EarFun Air Pro 2-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: a single measurement from the squig.link database of dhrme. Thanks to them for publishing their work.

Head-to-Head Comparisons

1 comparisons

More EarFun headphones →