CMF by Nothing Buds Pro Review: Ranked #226 of 1490

Last updated: October 20, 2026

The CMF by Nothing Buds Pro ranks #226 out of 1490 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 20, 2026 at 10:35 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

CMF by Nothing Buds Pro - ranked #226 of 1490 In-Ear Headphones · Editor's rating 4.4/5

#226 CMF by Nothing Buds Pro: $42 Wireless Discontinued eBay

Pros: Budget wireless ANC earbuds at about $42 with a preference score of 78. Bass is full to 20 Hz with a 3.4 dB lift, battery life is 11 hours (39 with the case), and they are rated IP54.

Cons: A 4.5 dB peak near 7.7 kHz can make sibilants stand out. They are discontinued and Bluetooth codecs stop at AAC, and the score rests on a single measurement.

Is the CMF by Nothing Buds Pro right for you?

Buy it if

  • you want the tuning most listeners prefer in blind tests out of the box (Harman score 78).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you want noise cancelling for commutes or flights.

Skip it if

  • you want to buy it new: it is discontinued.
ReleasedSep 2023 (3 years ago)
Active Noise CancellingYes
BackClosed
Battery Life11 hours; 39 hours with case (ANC off)
Bluetooth CodecsSBC, AAC
Bluetooth Version5.3
ConnectionWireless
Deviation From Target1.74 dB standard deviation
Driver TypeDynamic
Drivers1 x 11mm dynamic per earbud
Form FactorIn-ear
Harman Preference Score78 (1 squig.link measurement, calibrated to AutoEQ)
IP RatingIP54
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.4 dB at 30 Hz)
Tonal Tilt-0.27 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -2.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 92 out of 100, up from 78.

FilterFrequencyGainQ
Low shelf105 Hz-1.5 dB0.70
Peak23 Hz+3.8 dB2.46
Peak49 Hz-1.2 dB3.38
Peak70 Hz-3.5 dB2.10
Peak154 Hz+2.2 dB4.65
Peak1,272 Hz-1.5 dB4.93
Peak3,671 Hz+1.9 dB2.13
Peak7,216 Hz-3.0 dB4.19

Neutral target

Set a preamp of -1.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 94 out of 100, up from 38.

FilterFrequencyGainQ
Low shelf105 Hz-10.0 dB0.70
Peak23 Hz+3.4 dB2.76
Peak47 Hz-1.2 dB3.36
Peak69 Hz-4.0 dB1.89
Peak96 Hz-1.2 dB5.88
Peak155 Hz+2.3 dB4.42
Peak1,272 Hz-1.5 dB4.97
Peak3,668 Hz+1.9 dB2.12
Peak7,216 Hz-3.0 dB4.20

Studio flat target

Set a preamp of -4.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 86 out of 100, up from 20.

FilterFrequencyGainQ
Low shelf105 Hz-11.5 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak88 Hz-3.7 dB1.21
Peak147 Hz+1.3 dB4.67
Peak266 Hz-1.4 dB1.76
Peak1,263 Hz-1.4 dB4.43
Peak2,675 Hz+3.9 dB2.37
Peak3,705 Hz+1.5 dB4.30
Peak6,472 Hz-3.5 dB2.61

Warm target

Set a preamp of -2.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 94 out of 100, up from 78.

FilterFrequencyGainQ
Low shelf105 Hz-1.3 dB0.70
High shelf10,000 Hz-3.6 dB0.70
Peak23 Hz+3.9 dB2.45
Peak49 Hz-1.2 dB3.30
Peak69 Hz-3.4 dB2.21
Peak95 Hz-1.2 dB5.81
Peak155 Hz+2.3 dB4.10
Peak725 Hz+1.4 dB2.94
Peak1,331 Hz-1.5 dB4.65
Peak7,073 Hz-4.8 dB1.92

Bass target

Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 93 out of 100, up from 79.

FilterFrequencyGainQ
Low shelf105 Hz+2.2 dB0.70
Peak23 Hz+4.0 dB2.36
Peak51 Hz-1.2 dB3.60
Peak70 Hz-3.2 dB2.27
Peak154 Hz+2.2 dB4.61
Peak1,272 Hz-1.5 dB4.92
Peak3,673 Hz+1.9 dB2.14
Peak7,216 Hz-3.0 dB4.18

Bright target

Set a preamp of -4.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 91 out of 100, up from 30.

FilterFrequencyGainQ
Low shelf105 Hz-10.1 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak23 Hz+3.4 dB2.73
Peak47 Hz-1.2 dB3.41
Peak69 Hz-4.0 dB1.90
Peak96 Hz-1.2 dB5.92
Peak154 Hz+2.3 dB4.53
Peak733 Hz+1.1 dB3.96
Peak1,280 Hz-1.6 dB4.29
Peak4,186 Hz+3.9 dB1.44

V-shaped target

Set a preamp of -6.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from a single measurement from squig.link, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 88 out of 100, up from 78.

FilterFrequencyGainQ
Low shelf105 Hz+2.8 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak23 Hz+3.7 dB2.99
Peak30 Hz+1.0 dB4.90
Peak67 Hz-3.0 dB1.85
Peak163 Hz+3.2 dB2.99
Peak343 Hz+0.8 dB0.72
Peak1,250 Hz-2.0 dB3.92
Peak4,234 Hz+4.3 dB1.15

Frequency Response

How the CMF by Nothing Buds Pro measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is a single measurement, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

CMF by Nothing Buds ProHarman target
Measured frequency response of the CMF by Nothing Buds Pro-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: a single measurement from the squig.link database of filk. Thanks to them for publishing their work.