The BGVP NS10 Pro ranks #516 out of 1084 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.
Brand: BGVP
Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
#516 BGVP NS10 Pro e-earphone (JP) eBay
Pros: A hybrid with an 8mm dynamic driver and a 6mm planar, interchangeable nozzles and a metal shell. Measurements show treble right on the Harman target (score 71 across six measurements).
Cons: Bass sits about 3.4 dB below target, so it sounds lean. It is sold mainly through Japanese retailers.
Is the BGVP NS10 Pro right for you?
Buy it if
- you are happy to use EQ: our preset lifts its Harman match by about 20 points.
Skip it if
- you want more bass (about 3 dB below target).
| Released | 2024 (2 years ago) |
|---|---|
| Back | Closed |
| Connection | Wired |
| Deviation From Target | 1.97 dB standard deviation |
| Driver Type | Hybrid |
| Drivers | 1 x 8mm dynamic + 1 x 6mm planar |
| Form Factor | In-ear |
| Harman Preference Score | 71 (median of 6 squig.link measurements, calibrated to AutoEQ) |
| Impedance | 8 ohms |
| Sensitivity | 104 dB SPL/mW |
| Sub-bass Extension | Within 6 dB of target down to 20 Hz (-2.5 dB at 30 Hz) |
| Tonal Tilt | +0.78 (negative is warmer, positive brighter) |
EQ Presets
Harman target
Set a preamp of -4.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 91 out of 100, up from 71.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +3.9 dB | 0.70 |
| High shelf | 10,000 Hz | -2.2 dB | 0.70 |
| Peak | 424 Hz | +2.7 dB | 1.17 |
| Peak | 1,451 Hz | -2.6 dB | 1.99 |
| Peak | 3,731 Hz | +3.7 dB | 2.85 |
| Peak | 5,738 Hz | +2.3 dB | 6.00 |
Neutral target
Set a preamp of -3.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 93 out of 100, up from 62.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -4.6 dB | 0.70 |
| High shelf | 10,000 Hz | -2.2 dB | 0.70 |
| Peak | 424 Hz | +2.7 dB | 1.22 |
| Peak | 1,453 Hz | -2.6 dB | 2.01 |
| Peak | 3,732 Hz | +3.7 dB | 2.85 |
| Peak | 5,738 Hz | +2.3 dB | 6.00 |
Studio flat target
Set a preamp of -4.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 93 out of 100, up from 48.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -7.2 dB | 0.70 |
| High shelf | 10,000 Hz | +1.9 dB | 0.70 |
| Peak | 551 Hz | +2.1 dB | 1.83 |
| Peak | 1,391 Hz | -2.4 dB | 3.40 |
| Peak | 3,269 Hz | +4.9 dB | 2.79 |
Warm target
Set a preamp of -4.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 91 out of 100, up from 62.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +4.2 dB | 0.70 |
| High shelf | 10,000 Hz | -5.8 dB | 0.70 |
| Peak | 424 Hz | +3.0 dB | 1.09 |
| Peak | 1,516 Hz | -2.9 dB | 2.03 |
| Peak | 3,569 Hz | +2.4 dB | 5.38 |
| Peak | 7,505 Hz | -3.0 dB | 4.53 |
Bass target
Set a preamp of -6.4 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 89 out of 100, up from 54.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +6.0 dB | 0.70 |
| High shelf | 10,000 Hz | -2.2 dB | 0.70 |
| Peak | 85 Hz | +1.1 dB | 0.89 |
| Peak | 424 Hz | +2.6 dB | 1.04 |
| Peak | 695 Hz | +1.0 dB | 3.66 |
| Peak | 1,443 Hz | -2.7 dB | 1.93 |
| Peak | 3,731 Hz | +3.7 dB | 2.85 |
| Peak | 5,738 Hz | +2.3 dB | 6.00 |
| Peak | 8,000 Hz | -1.3 dB | 3.92 |
Bright target
Set a preamp of -5.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 94 out of 100, up from 56.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | -4.6 dB | 0.70 |
| High shelf | 10,000 Hz | +1.7 dB | 0.70 |
| Peak | 424 Hz | +2.7 dB | 1.27 |
| Peak | 1,442 Hz | -2.9 dB | 2.19 |
| Peak | 3,489 Hz | +2.8 dB | 5.74 |
| Peak | 5,016 Hz | +5.0 dB | 1.22 |
V-shaped target
Set a preamp of -6.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 6 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 86 out of 100, up from 58.
| Filter | Frequency | Gain | Q |
|---|---|---|---|
| Low shelf | 105 Hz | +6.0 dB | 0.70 |
| High shelf | 10,000 Hz | +2.0 dB | 0.70 |
| Peak | 103 Hz | +1.7 dB | 1.28 |
| Peak | 350 Hz | +3.3 dB | 0.69 |
| Peak | 1,332 Hz | -3.4 dB | 2.00 |
| Peak | 3,456 Hz | +2.8 dB | 5.17 |
| Peak | 5,016 Hz | +5.4 dB | 1.15 |
| Peak | 6,788 Hz | -1.9 dB | 6.00 |
- Reviews, Comparisons and Sound Samples
Frequency Response
How the BGVP NS10 Pro measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 6 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.
Measurement data: median of 6 measurements from the squig.link databases of aftersound, atechreviews, flare, hu-fi, soundcheck39 and tonedeafmonk. Thanks to each of them for publishing their work.