Astrotec GX100 Review: Ranked #859 of 1291

Last updated: October 17, 2026

The Astrotec GX100 ranks #859 out of 1291 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#859 Astrotec GX100: $49.90 Astrotec $49.90 eBay

Pros: A broadly balanced tuning with a preference score of 67 against the Harman target.

Cons: Treble about 2 dB above target from 3 to 10 kHz, which can sound sharp or tiring at higher volume. An uneven response, 2.4 dB standard deviation from target.

Is the Astrotec GX100 right for you?

Buy it if

  • you are happy to use EQ: our preset lifts its Harman match by about 20 points.

Skip it if

  • you are treble-sensitive (treble sits about 2.2 dB above target).
  • you want the best value: the higher-rated EPZ G10 costs about $26 less.
BackClosed
ConnectionWired
Deviation From Target2.39 dB standard deviation
Driver TypeHybrid
Drivers1 DD + 1 PZT (1 x 10mm LCP dynamic driver + 1 x 10.6mm piezoelectric ceramic driver)
Form FactorIn-ear
Frequency Response5Hz - 40kHz
Harman Preference Score67 (median of 4 squig.link measurements, calibrated to AutoEQ)
Impedance32 ohms
Sensitivity108 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (-4.3 dB at 30 Hz)
Tonal Tilt+0.98 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -3.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 87 out of 100, up from 67.

FilterFrequencyGainQ
Low shelf105 Hz+3.6 dB0.70
High shelf10,000 Hz+1.4 dB0.70
Peak174 Hz-2.5 dB0.77
Peak2,500 Hz-2.7 dB3.37
Peak5,289 Hz-4.9 dB2.23

Neutral target

Set a preamp of -1.5 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 88 out of 100, up from 69.

FilterFrequencyGainQ
Low shelf105 Hz-5.0 dB0.70
High shelf10,000 Hz+1.4 dB0.70
Peak174 Hz-2.5 dB0.70
Peak2,501 Hz-2.7 dB3.37
Peak5,288 Hz-4.9 dB2.25

Studio flat target

Set a preamp of -2.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 94 out of 100, up from 53.

FilterFrequencyGainQ
Low shelf105 Hz-7.5 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak168 Hz-4.4 dB0.74
Peak739 Hz+1.3 dB2.83
Peak3,433 Hz+1.4 dB4.87
Peak5,297 Hz-7.5 dB3.62
Peak7,695 Hz-1.4 dB6.00

Warm target

Set a preamp of -5.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 92 out of 100, up from 57.

FilterFrequencyGainQ
Low shelf105 Hz+3.8 dB0.70
High shelf10,000 Hz-0.7 dB0.70
Peak23 Hz+1.4 dB1.65
Peak174 Hz-2.2 dB0.86
Peak741 Hz+1.8 dB2.04
Peak2,522 Hz-1.8 dB4.29
Peak3,915 Hz+2.4 dB5.25
Peak5,237 Hz-2.2 dB6.00
Peak5,899 Hz-5.1 dB0.55

Bass target

Set a preamp of -6.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 86 out of 100, up from 49.

FilterFrequencyGainQ
Low shelf105 Hz+5.8 dB0.70
High shelf10,000 Hz+1.4 dB0.70
Peak53 Hz+0.9 dB2.27
Peak198 Hz-2.3 dB1.14
Peak737 Hz+1.3 dB2.90
Peak2,500 Hz-2.7 dB3.37
Peak4,019 Hz+1.7 dB4.89
Peak5,289 Hz-4.9 dB2.22
Peak7,976 Hz-2.0 dB6.00

Bright target

Set a preamp of -2.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 93 out of 100, up from 63.

FilterFrequencyGainQ
Low shelf105 Hz-5.0 dB0.70
High shelf10,000 Hz+2.0 dB0.70
Peak23 Hz+0.9 dB1.58
Peak78 Hz-1.0 dB2.35
Peak174 Hz-2.6 dB0.66
Peak696 Hz+1.4 dB2.24
Peak2,476 Hz-2.5 dB4.11
Peak3,899 Hz+1.9 dB5.62
Peak5,180 Hz-2.3 dB6.00
Peak6,666 Hz+2.0 dB3.94

V-shaped target

Set a preamp of -6.0 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 4 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 81 out of 100, up from 55.

FilterFrequencyGainQ
Low shelf105 Hz+5.9 dB0.70
High shelf10,000 Hz+2.0 dB0.70

Frequency Response

How the Astrotec GX100 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 4 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Astrotec GX100Harman target
Measured frequency response of the Astrotec GX100-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 4 measurements from the squig.link databases of audioamigo, pw, soundcheck39 and tonedeafmonk. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

3 comparisons