Akoustyx S-6 Review: Ranked #544 of 1061

Last updated: October 15, 2026

The Akoustyx S-6 ranks #544 out of 1061 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Prices on this page were last checked October 15, 2026 at 5:41 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#544 Akoustyx S-6: $200.00 Akoustyx $200.00 eBay

Pros: A single planar magnetic IEM. Measurements show full sub-bass to 20 Hz (score 70 across three measurements).

Cons: Treble sits about 2.4 dB above target, so it can sound bright. Bass sits about 3.3 dB above target, a bass heavy balance. Its score rests on three measurements.

Is the Akoustyx S-6 right for you?

Buy it if

  • you like extra bass (about +3 dB below 150 Hz versus the target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 20 points.

Skip it if

  • you are treble-sensitive (treble sits about 2.4 dB above target).
  • you want the best value: the higher-rated EPZ G10 costs about $176 less.
BackClosed
ConnectionWired
Deviation From Target2.24 dB standard deviation
Driver TypePlanar Magnetic
Drivers1 x planar magnetic
Form FactorIn-ear
Harman Preference Score70 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance18 ohms
Sensitivity108 dB SPL
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+5.2 dB at 30 Hz)
Tonal Tilt-0.32 (negative is warmer, positive brighter)

EQ Presets

Harman target

Set a preamp of -1.2 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz-4.0 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz-3.0 dB3.05
Peak60 Hz+1.6 dB1.65
Peak213 Hz-1.9 dB1.92
Peak756 Hz+1.3 dB2.03
Peak2,997 Hz-6.6 dB1.73
Peak5,401 Hz-4.8 dB6.00
Peak7,527 Hz+2.0 dB3.37

Neutral target

Set a preamp of -1.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 86 out of 100, up from 31.

FilterFrequencyGainQ
Low shelf105 Hz-11.3 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak36 Hz-0.9 dB1.08
Peak186 Hz-1.7 dB1.05
Peak741 Hz+1.3 dB1.76
Peak2,997 Hz-6.6 dB1.74
Peak5,401 Hz-4.8 dB6.00
Peak7,527 Hz+2.0 dB3.37

Studio flat target

Set a preamp of -0.8 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 74 out of 100, up from 16.

FilterFrequencyGainQ
Low shelf105 Hz-11.9 dB0.70
High shelf10,000 Hz-2.7 dB0.70
Peak160 Hz-3.8 dB0.70
Peak746 Hz+1.2 dB2.02
Peak2,881 Hz-3.6 dB6.00
Peak4,708 Hz-5.1 dB1.29
Peak5,514 Hz-2.5 dB6.00
Peak7,491 Hz+2.0 dB4.08

Warm target

Set a preamp of -0.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 84 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz-3.8 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak3,354 Hz-6.9 dB0.94
Peak5,493 Hz-4.6 dB6.00

Bass target

Set a preamp of -1.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 92 out of 100, up from 74.

FilterFrequencyGainQ
High shelf10,000 Hz-6.0 dB0.70
Peak23 Hz-3.0 dB3.05
Peak60 Hz+1.6 dB1.65
Peak213 Hz-1.9 dB1.92
Peak756 Hz+1.3 dB2.04
Peak2,997 Hz-6.6 dB1.73
Peak5,401 Hz-4.8 dB6.00
Peak7,527 Hz+2.0 dB3.37

Bright target

Set a preamp of -1.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 80 out of 100, up from 25.

FilterFrequencyGainQ
Low shelf105 Hz-11.3 dB0.70
High shelf10,000 Hz-5.5 dB0.70
Peak36 Hz-0.9 dB1.11
Peak186 Hz-1.7 dB0.95
Peak710 Hz+1.2 dB2.34
Peak2,852 Hz-7.0 dB3.34
Peak5,333 Hz-2.3 dB6.00
Peak7,329 Hz+2.0 dB3.06

V-shaped target

Set a preamp of -1.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 80 out of 100, up from 76.

FilterFrequencyGainQ
Low shelf105 Hz+0.4 dB0.70
High shelf10,000 Hz-3.9 dB0.70
Peak2,858 Hz-6.5 dB3.89
Peak7,295 Hz+2.0 dB2.71

Frequency Response

How the Akoustyx S-6 measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

Akoustyx S-6Harman target
Measured frequency response of the Akoustyx S-6-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of dentreviews, superreview and treblewellxtended. Thanks to each of them for publishing their work.