AME Custom Mousa Review: Ranked #935 of 1291

Last updated: October 17, 2026

The AME Custom Mousa ranks #935 out of 1291 total In-Ear Headphones for sound quality. See all Headphones rankings for every top pick.

Brand: AME

Prices on this page were last checked October 16, 2026 at 5:46 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

#935 AME Custom Mousa: $4,500 MusicTeck $4,500 eBay

Pros: About 4 dB more bass than the Harman target below 150 Hz, for listeners who want a fuller low end.

Cons: An uneven response, 2.5 dB standard deviation from target.

Is the AME Custom Mousa right for you?

Buy it if

  • you like extra bass (about +4 dB below 150 Hz versus the target).
  • you want sub-bass rumble that reaches down to 20 Hz.
  • you are happy to use EQ: our preset lifts its Harman match by about 26 points.

Skip it if

  • you want the best value: the higher-rated EPZ G10 costs about $4,476 less.
BackClosed
ConnectionWired
Deviation From Target2.49 dB standard deviation
Driver TypeHybrid (Balanced Armature + Bone Conduction)
Drivers15 drivers per side (13 Balanced Armatures + 2 Sonion Bone Conduction Drivers)
Form FactorIn-ear
Frequency Response10Hz - 45kHz
Harman Preference Score65 (median of 3 squig.link measurements, calibrated to AutoEQ)
Impedance8 ohms
Sensitivity106 dB
Sub-bass ExtensionWithin 6 dB of target down to 20 Hz (+0.4 dB at 30 Hz)
Tonal Tilt-0.66 (negative is warmer, positive brighter)
WeightCNC Mokume-gane pure copper housing

EQ Presets

Harman target

Set a preamp of -1.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Harman match with this EQ: 90 out of 100, up from 65.

FilterFrequencyGainQ
Low shelf105 Hz-2.6 dB0.70
High shelf10,000 Hz-4.5 dB0.70
Peak30 Hz+1.1 dB1.25
Peak191 Hz-5.9 dB0.68
Peak389 Hz-0.7 dB2.31
Peak941 Hz+1.0 dB2.13
Peak3,021 Hz+1.6 dB1.26
Peak5,789 Hz-2.2 dB6.00
Peak8,000 Hz-2.2 dB6.00

Neutral target

Set a preamp of -1.6 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Neutral match with this EQ: 92 out of 100, up from 29.

FilterFrequencyGainQ
Low shelf105 Hz-11.1 dB0.70
High shelf10,000 Hz-4.5 dB0.70
Peak32 Hz+0.6 dB1.67
Peak181 Hz-5.7 dB0.61
Peak368 Hz-0.7 dB2.23
Peak932 Hz+1.0 dB2.06
Peak3,021 Hz+1.6 dB1.22
Peak5,788 Hz-2.2 dB6.00
Peak8,000 Hz-2.2 dB6.00

Studio flat target

Set a preamp of -3.9 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Studio flat match with this EQ: 87 out of 100, up from 10.

FilterFrequencyGainQ
Low shelf105 Hz-12.0 dB0.70
High shelf10,000 Hz+1.4 dB0.70
Peak181 Hz-7.9 dB0.67
Peak2,836 Hz+4.0 dB1.97
Peak5,811 Hz-4.1 dB3.95

Warm target

Set a preamp of -0.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Warm match with this EQ: 89 out of 100, up from 71.

FilterFrequencyGainQ
Low shelf105 Hz-2.4 dB0.70
High shelf10,000 Hz-6.0 dB0.70
Peak189 Hz-5.7 dB0.69
Peak7,704 Hz-3.9 dB1.30

Bass target

Set a preamp of -2.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bass match with this EQ: 92 out of 100, up from 70.

FilterFrequencyGainQ
Low shelf105 Hz+1.2 dB0.70
High shelf10,000 Hz-4.5 dB0.70
Peak30 Hz+1.3 dB1.21
Peak94 Hz-0.7 dB2.16
Peak194 Hz-5.9 dB0.70
Peak398 Hz-0.7 dB2.62
Peak943 Hz+1.0 dB2.16
Peak3,021 Hz+1.6 dB1.28
Peak5,789 Hz-2.2 dB6.00
Peak8,000 Hz-2.2 dB6.00

Bright target

Set a preamp of -3.3 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted Bright match with this EQ: 91 out of 100, up from 20.

FilterFrequencyGainQ
Low shelf105 Hz-11.2 dB0.70
High shelf10,000 Hz-0.6 dB0.70
Peak186 Hz-5.8 dB0.62
Peak4,148 Hz+3.2 dB0.79

V-shaped target

Set a preamp of -4.1 dB, then add these filters in any parametric equalizer (Wavelet, Equalizer APO, Peace, or a player with parametric EQ). Calculated by Speaker Ranking from the median of 3 squig.link measurements, in the filter layout AutoEQ uses. Predicted V-shaped match with this EQ: 91 out of 100, up from 68.

FilterFrequencyGainQ
Low shelf105 Hz+1.8 dB0.70
High shelf10,000 Hz+0.9 dB0.70
Peak194 Hz-4.5 dB0.66
Peak4,148 Hz+4.0 dB0.99

Frequency Response

How the AME Custom Mousa measures across the audible range, against the Harman in-ear target that most listeners prefer in blind tests. Where the line sits above the target that range sounds louder (more bass, brighter treble), below it quieter. The curve is the median of 3 independent measurements, so one odd sample or rig cannot skew it, and both lines are shifted so their 500 Hz to 2 kHz average sits at 0 dB.

AME Custom MousaHarman target
Measured frequency response of the AME Custom Mousa-24-18-12-60+6+12+18dB20501002005001k2k5k10k20k

Measurement data: median of 3 measurements from the squig.link databases of ducbloke, jaytiss and treblewellxtended. Thanks to each of them for publishing their work.

Head-to-Head Comparisons

3 comparisons

More AME headphones →