Yamaha HS5 vs Neumi BS5P

Last updated: August 24, 2026

Short answer: the Yamaha HS5 for better sound quality, the Neumi BS5P for the lower price. The Yamaha HS5 ranks #13 of 58 powered bookshelf speakers at $339.98. The Neumi BS5P ranks #54 at $150, $189.98 cheaper.

What the Yamaha HS5 offers: Very neutral. Excellent for mixing and anything needing a neutral output. Watch for: Not quite as deep of bass as some of the others in this size class. Slight midrange boost.

What the Neumi BS5P offers: Exceptionally broad connectivity for the price: Bluetooth, optical, coaxial and RCA inputs, remote control and 75W total amplification. The 5-inch fiberglass woofer/1-inch silk-dome platform has generally useful directivity outside port resonances and therefore responds well to corrective EQ. Compact dimensions and ample nearfield volume make it practical for a desk or small room. Watch for: The original firmware Erin reviewed produces a pronounced V-curve—excess midbass and treble with recessed dialogue/midrange—and is a fidelity step backward from the passive BS5. Nearfield treble above 8kHz rises as much as 4dB relative to farfield, distortion is already substantial at 86dB, and compression becomes severe above 96dB. Port resonances further contaminate the response. Erin later measured improved firmware, but buyers must confirm revision. Passive sensitivity and impedance are not applicable.

Buy the Yamaha HS5 if sound quality matters more than the price. Buy the Neumi BS5P if the price matters more than sound quality.

If sound quality matters at all to you, skip the Neumi BS5P. It ranks near the bottom of the 58 powered bookshelf speakers, so look higher up the list instead.

Yamaha HS5 vs Neumi BS5P

Specifications Side By Side

Yamaha HS5 Neumi BS5P
Price$339.98$150/pair
Ranked#13 of 58 in Medium Size Powered Bookshelf Speakers#54 of 58 in Medium Size Powered Bookshelf Speakers
Bass Extension (-3dB)88Hz (measured, Audio Science Review)90.8Hz (measured, Erin’s Audio Corner)
Bass Extension (-10dB)68Hz (measured, Audio Science Review)56.1Hz (measured, Erin’s Audio Corner)
Dimensions11.2"H x 6.7"W x 8.7"D (284.5 x 170.2 x 221 mm)-
Frequency Response58Hz - 24kHz (-3dB) (Manufacturer specified)-
InputsXLRBluetooth, optical, coaxial and RCA
Weight12.1 lbs / 5.5 kg each-
Drivers5" (127mm) woofer1" silk-dome tweeter; 5" fiberglass woofer
AppNo-
BluetoothNo-
EQYes (Room adjustment)-
Output Power45w Per Speaker-
Bass Extension-Erin’s response shows usable midbass but limited deep-bass headroom
Sensitivity-Not applicable (active DSP loudspeaker)
Power-75W total

More useful head-to-heads from the same speaker class:

Prices on this page were last checked August 24, 2026 at 6:53 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Yamaha HS5: $339.98 Amazon eBay

Yamaha HS5 ranking card

Pros: Very neutral. Excellent for mixing and anything needing a neutral output.

Cons: Not quite as deep of bass as some of the others in this size class. Slight midrange boost.

AppNo
Bass Extension (-10dB)68Hz (measured, Audio Science Review)
Bass Extension (-3dB)88Hz (measured, Audio Science Review)
BluetoothNo
Dimensions11.2"H x 6.7"W x 8.7"D (284.5 x 170.2 x 221 mm)
Drivers5" (127mm) woofer
EQYes (Room adjustment)
Frequency Response58Hz - 24kHz (-3dB) (Manufacturer specified)
InputsXLR
Output Power45w Per Speaker
Weight12.1 lbs / 5.5 kg each

Neumi BS5P: $150/pair Amazon eBay

Neumi BS5P ranking card

Pros: Exceptionally broad connectivity for the price: Bluetooth, optical, coaxial and RCA inputs, remote control and 75W total amplification. The 5-inch fiberglass woofer/1-inch silk-dome platform has generally useful directivity outside port resonances and therefore responds well to corrective EQ. Compact dimensions and ample nearfield volume make it practical for a desk or small room.

Cons: The original firmware Erin reviewed produces a pronounced V-curve—excess midbass and treble with recessed dialogue/midrange—and is a fidelity step backward from the passive BS5. Nearfield treble above 8kHz rises as much as 4dB relative to farfield, distortion is already substantial at 86dB, and compression becomes severe above 96dB. Port resonances further contaminate the response. Erin later measured improved firmware, but buyers must confirm revision. Passive sensitivity and impedance are not applicable.

Bass ExtensionErin's response shows usable midbass but limited deep-bass headroom
Bass Extension (-10dB)56.1Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)90.8Hz (measured, Erin's Audio Corner)
Drivers1" silk-dome tweeter; 5" fiberglass woofer
InputsBluetooth, optical, coaxial and RCA
Power75W total
SensitivityNot applicable (active DSP loudspeaker)