Dynaudio LYD 5 vs Neumi BS5P

Last updated: August 25, 2026

Short answer: the Dynaudio LYD 5 for better sound quality, the Neumi BS5P for the lower price. The Dynaudio LYD 5 ranks #45 of 64 powered bookshelf speakers at $1000. The Neumi BS5P ranks #60 at $150, $850 cheaper.

What the Dynaudio LYD 5 offers: CEA2034 spinorama shows a generally flat on-axis response with well-controlled low-frequency distortion. Early reflections summation is smart engineering the reviewer called “pretty clever.” 100W total Class D amplification across a 5” woofer and 1” tweeter. Watch for: A dip shows up around 1.64kHz on-axis, and the upper bass is boosted to compensate for a lack of real deep bass extension, giving a mild tubbiness. Treble energy runs a bit hot, and the woofer beams around 4kHz, creating a directivity error there. Bass distortion exceeds acceptable levels above 1kHz at higher volumes. The reviewer said he’d personally reach for a JBL 305P MKII or Neumann KH80 DSP instead at this price.

What the Neumi BS5P offers: Exceptionally broad connectivity for the price: Bluetooth, optical, coaxial and RCA inputs, remote control and 75W total amplification. The 5-inch fiberglass woofer/1-inch silk-dome platform has generally useful directivity outside port resonances and therefore responds well to corrective EQ. Compact dimensions and ample nearfield volume make it practical for a desk or small room. Watch for: The original firmware Erin reviewed produces a pronounced V-curve—excess midbass and treble with recessed dialogue/midrange—and is a fidelity step backward from the passive BS5. Nearfield treble above 8kHz rises as much as 4dB relative to farfield, distortion is already substantial at 86dB, and compression becomes severe above 96dB. Port resonances further contaminate the response. Erin later measured improved firmware, but buyers must confirm revision. Passive sensitivity and impedance are not applicable.

Buy the Dynaudio LYD 5 if sound quality matters more than the price. Buy the Neumi BS5P if the price matters more than sound quality.

If sound quality matters at all to you, skip the Neumi BS5P. It ranks near the bottom of the 64 powered bookshelf speakers, so look higher up the list instead.

Dynaudio LYD 5 vs Neumi BS5P

Specifications Side By Side

Dynaudio LYD 5 Neumi BS5P
Price$1000$150/pair
Ranked#45 of 64 in Medium Size Powered Bookshelf Speakers#60 of 64 in Medium Size Powered Bookshelf Speakers
Bass Extension (-3dB)68Hz (measured, Audio Science Review)90.8Hz (measured, Erin’s Audio Corner)
Bass Extension (-10dB)50Hz (measured, Audio Science Review)56.1Hz (measured, Erin’s Audio Corner)
Dimensions10.2"H x 6.7"W x 8.3"D (260 x 170 x 211 mm)-
Frequency Response50Hz - 21kHz (Manufacturer specified)-
Weight11.9 lbs / 5.4 kg each-
Drivers5" woofer, 28mm soft dome tweeter1" silk-dome tweeter; 5" fiberglass woofer
AppNo-
EQNo-
DSPNo-
Output Power100W total (50W LF, 50W HF)-
Bass Extension-Erin’s response shows usable midbass but limited deep-bass headroom
Sensitivity-Not applicable (active DSP loudspeaker)
Power-75W total
Inputs-Bluetooth, optical, coaxial and RCA

More useful head-to-heads from the same speaker class:

Prices on this page were last checked August 25, 2026 at 6:19 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Dynaudio LYD 5: $1000 Bhphotovideo eBay

Dynaudio LYD 5 ranking card

Pros: CEA2034 spinorama shows a generally flat on-axis response with well-controlled low-frequency distortion. Early reflections summation is smart engineering the reviewer called “pretty clever.” 100W total Class D amplification across a 5” woofer and 1” tweeter.

Cons: A dip shows up around 1.64kHz on-axis, and the upper bass is boosted to compensate for a lack of real deep bass extension, giving a mild tubbiness. Treble energy runs a bit hot, and the woofer beams around 4kHz, creating a directivity error there. Bass distortion exceeds acceptable levels above 1kHz at higher volumes. The reviewer said he’d personally reach for a JBL 305P MKII or Neumann KH80 DSP instead at this price.

AppNo
Bass Extension (-10dB)50Hz (measured, Audio Science Review)
Bass Extension (-3dB)68Hz (measured, Audio Science Review)
DSPNo
Dimensions10.2"H x 6.7"W x 8.3"D (260 x 170 x 211 mm)
Drivers5" woofer, 28mm soft dome tweeter
EQNo
Frequency Response50Hz - 21kHz (Manufacturer specified)
Output Power100W total (50W LF, 50W HF)
Weight11.9 lbs / 5.4 kg each

Neumi BS5P: $150/pair Amazon eBay

Neumi BS5P ranking card

Pros: Exceptionally broad connectivity for the price: Bluetooth, optical, coaxial and RCA inputs, remote control and 75W total amplification. The 5-inch fiberglass woofer/1-inch silk-dome platform has generally useful directivity outside port resonances and therefore responds well to corrective EQ. Compact dimensions and ample nearfield volume make it practical for a desk or small room.

Cons: The original firmware Erin reviewed produces a pronounced V-curve—excess midbass and treble with recessed dialogue/midrange—and is a fidelity step backward from the passive BS5. Nearfield treble above 8kHz rises as much as 4dB relative to farfield, distortion is already substantial at 86dB, and compression becomes severe above 96dB. Port resonances further contaminate the response. Erin later measured improved firmware, but buyers must confirm revision. Passive sensitivity and impedance are not applicable.

Bass ExtensionErin's response shows usable midbass but limited deep-bass headroom
Bass Extension (-10dB)56.1Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)90.8Hz (measured, Erin's Audio Corner)
Drivers1" silk-dome tweeter; 5" fiberglass woofer
InputsBluetooth, optical, coaxial and RCA
Power75W total
SensitivityNot applicable (active DSP loudspeaker)