Short answer: the Wharfedale Super Linton on measured sound quality, the Triangle Borea BR03 on price. The Wharfedale Super Linton ranks #24 of 130 bookshelf speakers at $2699. The Triangle Borea BR03 ranks #109 at $399, $2300 cheaper.
What the Wharfedale Super Linton offers: Three-way design with a 1” soft dome tweeter, 5” woven Kevlar mid-range, and 8” woven Kevlar woofer in a dual rear-ported, heavily damped MDF/particle-board cabinet. Comes as a genuinely matched pair (measured within about 1dB of each other) and includes custom matching stands. A major dynamic-range improvement over the original Heritage Linton - kick drums retain their impact from low to high volume instead of compressing, the standout objective improvement in this update. Fixes the original Linton’s main flaw: a 1-3kHz scoop that made it sound a bit soft and subdued is filled in here, giving noticeably more attack and dynamic punch. About 3dB more sensitivity than the original Linton (measured ~88.2dB), meaning roughly half the amplifier power for the same output. Wide horizontal radiation of about ±70°, right in the reviewer’s preferred range for an enveloping soundstage. Lower midrange distortion than the original Linton. Bass-shelf tuning intentionally allows closer-to-wall placement (about 1 foot worked well) without excess boominess, more flexible than the original Linton in that regard. Watch for: Rolls off earlier than the original Linton (F3 77Hz versus the original’s 52Hz), a deliberate trade-off for the closer-wall-placement flexibility. On-axis, there’s a mild treble lift around 4-6kHz that can sound a touch sibilant, though the reviewer found it not very noteworthy in practice. Diffraction shows up around 1.5-2kHz on-axis; needs about 10° of toe-out to smooth this out, though going further to 30° starts to lose some top-end air. Distortion peaks slightly higher than the original Linton in the 50-70Hz region. Minimum impedance dips to about 3 ohms around 150Hz, so a 4-ohm-stable amplifier is recommended for best results. Vertical dispersion of about ±20° means multi-row home theater seating outside that window will hear reduced top-end. Asymmetrical design requires attention to setup (tweeters need to face outward) for the most linear in-room response. A costly upgrade for existing Linton owners if the original’s specific flaws didn’t bother them.
What the Triangle Borea BR03 offers: Bass output is genuinely decent for the price - measured extension reaches F3 57Hz/F10 42Hz, which the reviewer had no real complaints about. Dual front-firing ports and a well-stuffed, well-braced cabinet. Solid build quality overall. Watch for: A noticeable mid-range suckout, most pronounced in the upper mid-range/lower treble, that the reviewer attributes to cabinet resonances and driver breakup rather than a deliberate voicing choice - it makes vocals and instruments sound recessed and thin rather than warm. Sibilance in the 4-8kHz region shows up on every track the reviewer tried. Measured minimum impedance dips to about 4.2 ohms (with an even lower EPDR), despite the speaker and its own rear panel being labeled 8 ohms - worth knowing if you’re planning to drive these with a receiver/AVR that assumes an 8-ohm nominal load. The reviewer is upfront that this speaker has a devoted following among other reviewers, but says he specifically doesn’t hear what they hear and wants people who own it to trust their own ears rather than assume something’s wrong with their hearing if they don’t love it either.
Buy the Wharfedale Super Linton if sound quality matters more than the price. Buy the Triangle Borea BR03 if the price matters more than sound quality.
The Triangle Borea BR03 is not a sound-quality pick. It sits near the bottom of the 130 bookshelf speakers; there are better options higher up.
Want more options? Browse the full Passive Home rankings.
Specifications Side By Side
| Wharfedale Super Linton | Triangle Borea BR03 | |
|---|---|---|
| Price | $2,699.00 per pair | $399.00 per pair |
| Ranked | #24 of 130 in Large Size Bookshelf Speakers | #109 of 130 in Large Size Bookshelf Speakers |
| Bass Extension (-10dB) | 34Hz (measured, Erin's Audio Corner) | 42Hz (measured, Erin's Audio Corner) |
| Bass Extension (-3dB) | 77Hz (measured, Erin's Audio Corner) | 57Hz (measured, Erin's Audio Corner) |
| Dimensions | 23.8"H x 11.8"W x 13"D (604.5 x 299.7 x 330.2 mm) | 14.96"H x 8.11"W x 12.36"D |
| Impedance | 4 ohms nominal (3 ohms minimum, measured, Erin's Audio Corner) | 8 ohms nominal (manufacturer spec), 4.2 ohms minimum (measured, Erin's Audio Corner) |
| Drivers | 8"(200mm) black woven Kevlar® cone woofer, 5"(135mm) black woven Kevlar® cone midrange, 1" (25mm) soft dome tweeter | 6.5" natural cellulose midwoofer, 1" (25mm) EFS silk dome tweeter |
| Sensitivity | 88.2dB (measured, Erin's Audio Corner) | 87.5dB (measured at 2.83V/1m, Erin's Audio Corner) |
| Weight | 43.7 lbs (19.8 kg) each | 13.2 lbs (6 kg) each |
| Woofer Cabinet | ported, rear | ported, dual front ports |
| Spinorama Preference Score | 5.28 | 3.12 |
| Spinorama Preference Score with Perfect Sub | 7.12 | 5.47 |
| Crossover Frequency | - | 3600Hz |
| Recommended Power | - | 100W |
Related Speaker Comparisons
More worthwhile head-to-heads for Wharfedale Super Linton:
- Wharfedale Super Linton vs Perlisten S4b
- Wharfedale Super Linton vs KEF Reference 1 Meta
- Wharfedale Super Linton vs GR-Research NX-Studio
- Wharfedale Super Linton vs AsciLab C6B
- Wharfedale Super Linton vs Audio First Cadentia 3
Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.
As an eBay Partner, we may be compensated if you make a purchase.
The Two Speakers In Full
Wharfedale Super Linton: $2,699.00 per pair Amazon Crutchfield eBay
Pros: Three-way design with a 1” soft dome tweeter, 5” woven Kevlar mid-range, and 8” woven Kevlar woofer in a dual rear-ported, heavily damped MDF/particle-board cabinet. Comes as a genuinely matched pair (measured within about 1dB of each other) and includes custom matching stands. A major dynamic-range improvement over the original Heritage Linton - kick drums retain their impact from low to high volume instead of compressing, the standout objective improvement in this update. Fixes the original Linton’s main flaw: a 1-3kHz scoop that made it sound a bit soft and subdued is filled in here, giving noticeably more attack and dynamic punch. About 3dB more sensitivity than the original Linton (measured ~88.2dB), meaning roughly half the amplifier power for the same output. Wide horizontal radiation of about ±70°, right in the reviewer’s preferred range for an enveloping soundstage. Lower midrange distortion than the original Linton. Bass-shelf tuning intentionally allows closer-to-wall placement (about 1 foot worked well) without excess boominess, more flexible than the original Linton in that regard. Measured bass extension of 77Hz (-3dB), with a measured sensitivity of 88.2dB.
Cons: Rolls off earlier than the original Linton (F3 77Hz versus the original’s 52Hz), a deliberate trade-off for the closer-wall-placement flexibility. On-axis, there’s a mild treble lift around 4-6kHz that can sound a touch sibilant, though the reviewer found it not very noteworthy in practice. Diffraction shows up around 1.5-2kHz on-axis; needs about 10° of toe-out to smooth this out, though going further to 30° starts to lose some top-end air. Distortion peaks slightly higher than the original Linton in the 50-70Hz region. Minimum impedance dips to about 3 ohms around 150Hz, so a 4-ohm-stable amplifier is recommended for best results. Vertical dispersion of about ±20° means multi-row home theater seating outside that window will hear reduced top-end. Asymmetrical design requires attention to setup (tweeters need to face outward) for the most linear in-room response. A costly upgrade for existing Linton owners if the original’s specific flaws didn’t bother them.
Full Wharfedale Super Linton review and specifications →
| Bass Extension (-10dB) | 34Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 77Hz (measured, Erin's Audio Corner) |
| Dimensions | 23.8"H x 11.8"W x 13"D (604.5 x 299.7 x 330.2 mm) |
| Drivers | 8"(200mm) black woven Kevlar® cone woofer, 5"(135mm) black woven Kevlar® cone midrange, 1" (25mm) soft dome tweeter |
| Impedance | 4 ohms nominal (3 ohms minimum, measured, Erin's Audio Corner) |
| Sensitivity | 88.2dB (measured, Erin's Audio Corner) |
| Spinorama Preference Score | 5.28 |
| Spinorama Preference Score with Perfect Sub | 7.12 |
| Weight | 43.7 lbs (19.8 kg) each |
| Woofer Cabinet | ported, rear |
- Links
- Reviews, Comparisons and Sound Samples
- Erin’s Audio Corner: 5 Reasons Wharfedale Super Linton is the Hidden Gem of Audio Equipment More from Erin’s Audio Corner →
- Erin’s Audio Corner Website Wharfedale Super Linton Review
- Erin’s Audio Corner: Upgrade Your Sound with These 6 Surprisingly Affordable Speakers!
- Erin’s Audio Corner: My Absolute Favorite Products of 2024 Revealed
- Erin’s Audio Corner Measurements (spinorama.org)
- Head-to-Head Comparisons
- Wharfedale Super Linton vs Ascend Acoustics CMT-340 SE2
- Wharfedale Super Linton vs Arendal 1528 Monitor 8
- Wharfedale Super Linton vs MoFi SourcePoint 10
- Wharfedale Super Linton vs Radiant Acoustics Clarity 6.2
- Wharfedale Super Linton vs Dynaudio Heritage Special
- Wharfedale Super Linton vs AsciLab F6Bs
- Wharfedale Super Linton vs MoFi SourcePoint 8
- Wharfedale Super Linton vs Wharfedale Linton 85
- See all 51 comparisons
Triangle Borea BR03: $399.00 per pair Amazon eBay
Pros: Bass output is genuinely decent for the price - measured extension reaches F3 57Hz/F10 42Hz, which the reviewer had no real complaints about. Dual front-firing ports and a well-stuffed, well-braced cabinet. Solid build quality overall. Measured bass extension of 57Hz (-3dB), with a measured sensitivity of 87.5dB.
Cons: A noticeable mid-range suckout, most pronounced in the upper mid-range/lower treble, that the reviewer attributes to cabinet resonances and driver breakup rather than a deliberate voicing choice - it makes vocals and instruments sound recessed and thin rather than warm. Sibilance in the 4-8kHz region shows up on every track the reviewer tried. Measured minimum impedance dips to about 4.2 ohms (with an even lower EPDR), despite the speaker and its own rear panel being labeled 8 ohms - worth knowing if you’re planning to drive these with a receiver/AVR that assumes an 8-ohm nominal load. The reviewer is upfront that this speaker has a devoted following among other reviewers, but says he specifically doesn’t hear what they hear and wants people who own it to trust their own ears rather than assume something’s wrong with their hearing if they don’t love it either.
Full Triangle Borea BR03 review and specifications →
| Bass Extension (-10dB) | 42Hz (measured, Erin's Audio Corner) |
|---|---|
| Bass Extension (-3dB) | 57Hz (measured, Erin's Audio Corner) |
| Crossover Frequency | 3600Hz |
| Dimensions | 14.96"H x 8.11"W x 12.36"D |
| Drivers | 6.5" natural cellulose midwoofer, 1" (25mm) EFS silk dome tweeter |
| Impedance | 8 ohms nominal (manufacturer spec), 4.2 ohms minimum (measured, Erin's Audio Corner) |
| Recommended Power | 100W |
| Sensitivity | 87.5dB (measured at 2.83V/1m, Erin's Audio Corner) |
| Spinorama Preference Score | 3.12 |
| Spinorama Preference Score with Perfect Sub | 5.47 |
| Weight | 13.2 lbs (6 kg) each |
| Woofer Cabinet | ported, dual front ports |
- Links
- Reviews, Comparisons and Sound Samples
- Head-to-Head Comparisons
- Triangle Borea BR03 vs B&W 805S
- Triangle Borea BR03 vs Wharfedale Diamond 9.1
- Triangle Borea BR03 vs Klipsch RP-600M
- Triangle Borea BR03 vs Sonus Faber Lumina II Amator
- Triangle Borea BR03 vs Aperion Audio Verus V8B
- Triangle Borea BR03 vs KEF Q350
- Triangle Borea BR03 vs Sonus Faber Sonetto II G2
- Triangle Borea BR03 vs Emotiva Airmotiv B2+
- See all 51 comparisons