Wharfedale Super Linton vs ELAC VELA BS 403

Last updated: October 1, 2026

Short answer: the ELAC VELA BS 403 for bass extension, the Wharfedale Super Linton for flexible placement. The VELA BS 403’s JET 5 ribbon tweeter and 6-inch sandwich woofer reach usable extension around 50Hz, deeper than JBL’s L52 Classic, but its dip-and-peak voicing near 2kHz reduces attack and clarity. The Super Linton is a heavily damped three-way that rolls off earlier than the original Linton at F3 77Hz, a trade for closer wall placement.

Wharfedale Super Linton vs ELAC VELA BS 403

Buy the Wharfedale Super Linton. It is rated higher for sound quality and still sold new, while the ELAC VELA BS 403 is discontinued.

Still deciding? The full Passive Home rankings cover every ranked option.

Specifications Side By Side

Wharfedale Super Linton ELAC VELA BS 403
Price$2,699.00 per pair$2,899 per pair Discontinued
Ranked#24 of 134 in Large Size Bookshelf Speakers#35 of 134 in Large Size Bookshelf Speakers
Bass Extension (-10dB)34Hz (measured, Erin’s Audio Corner)46Hz (measured average, Erin’s Audio Corner)
Bass Extension (-3dB)77Hz (measured, Erin’s Audio Corner)59Hz (measured average, Erin’s Audio Corner)
Dimensions23.8”H x 11.8”W x 13”D (604.5 x 299.7 x 330.2 mm)14-3/16”H x 7-1/2”W x 9-3/8”D
Impedance4 ohms nominal (3 ohms minimum, measured, Erin’s Audio Corner)4 ohms nominal, 3.2 ohms minimum (measured, Erin’s Audio Corner)
Drivers8”(200mm) black woven Kevlar® cone woofer, 5”(135mm) black woven Kevlar® cone midrange, 1” (25mm) soft dome tweeterJET 5 folded ribbon tweeter, 6” aluminum/paper sandwich cone woofer
Sensitivity88.2dB (measured, Erin’s Audio Corner)84.3dB (measured average, Erin’s Audio Corner)
Weight43.7 lbs (19.8 kg) each15.7 lbs (7.1 kg) each
Woofer Cabinetported, rear-
Spinorama Preference Score6.093.94
Spinorama Preference Score with Perfect Sub7.946.28
DIY KitNoNo
Frequency Response-41Hz - 50kHz (manufacturer specified)
Recommended Power-up to 100W RMS
Crossover Frequency-2.4kHz

More worthwhile head-to-heads for Wharfedale Super Linton:

Prices on this page were last checked October 3, 2026 at 10:26 PM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Wharfedale Super Linton: $2,699.00 per pair Amazon Crutchfield eBay

Wharfedale Super Linton ranking card

Pros: Three-way design with a 1” soft dome tweeter, 5” woven Kevlar mid-range, and 8” woven Kevlar woofer in a dual rear-ported, heavily damped MDF/particle-board cabinet. Comes as a genuinely matched pair (measured within about 1dB of each other) and includes custom matching stands. A major dynamic-range improvement over the original Heritage Linton: kick drums retain their impact from low to high volume instead of compressing, the standout objective improvement in this update. Fixes the original Linton’s main flaw: a 1-3kHz scoop that made it sound a bit soft and subdued is filled in here, giving noticeably more attack and dynamic punch. About 3dB more sensitivity than the original Linton (measured ~88.2dB), meaning roughly half the amplifier power for the same output. Wide horizontal radiation of about ±70°, right in the reviewer’s preferred range for an enveloping soundstage. Lower midrange distortion than the original Linton. Bass-shelf tuning intentionally allows closer-to-wall placement (about 1 foot worked well) without excess boominess, more flexible than the original Linton in that regard. Measured bass extension of 77Hz (-3dB), with a measured sensitivity of 88.2dB.

Cons: Rolls off earlier than the original Linton (F3 77Hz versus the original’s 52Hz), a deliberate trade-off for the closer-wall-placement flexibility. On-axis, there’s a mild treble lift around 4-6kHz that can sound a touch sibilant, though the reviewer found it not very noteworthy in practice. Diffraction shows up around 1.5-2kHz on-axis; needs about 10° of toe-out to smooth this out, though going further to 30° starts to lose some top-end air. Distortion peaks slightly higher than the original Linton in the 50-70Hz region. Minimum impedance dips to about 3 ohms around 150Hz, so a 4-ohm-stable amplifier is recommended for best results. Vertical dispersion of about ±20° means multi-row home theater seating outside that window will hear reduced top-end. Asymmetrical design requires attention to setup (tweeters need to face outward) for the most linear in-room response. A costly upgrade for existing Linton owners if the original’s specific flaws didn’t bother them.

Bass Extension (-10dB)34Hz (measured, Erin’s Audio Corner)
Bass Extension (-3dB)77Hz (measured, Erin’s Audio Corner)
DIY KitNo
Dimensions23.8”H x 11.8”W x 13”D (604.5 x 299.7 x 330.2 mm)
Drivers8”(200mm) black woven Kevlar® cone woofer, 5”(135mm) black woven Kevlar® cone midrange, 1” (25mm) soft dome tweeter
Impedance4 ohms nominal (3 ohms minimum, measured, Erin’s Audio Corner)
Sensitivity88.2dB (measured, Erin’s Audio Corner)
Spinorama Preference Score6.09
Spinorama Preference Score with Perfect Sub7.94
Weight43.7 lbs (19.8 kg) each
Woofer Cabinetported, rear

ELAC VELA BS 403: $2,899 per pair Discontinued eBay

ELAC VELA BS 403 ranking card

Newer model: the ELAC Vela BS 403.2. It’s likely to perform similarly, though we don’t have measurements to confirm that yet.

Pros: JET 5 folded ribbon tweeter pairs with a 6” aluminum/paper sandwich woofer for extended, well-controlled bass: Erin measured usable in-room extension to about 50 Hz, deeper than JBL’s competing L52 Classic despite lacking that speaker’s mild upper-bass bump. Compression stays within about 1 dB above 100 Hz up to 102 dB, on the better side of normal for a bookshelf this size, indicating good dynamic and transient capability. Wide, spacious soundstage radiation. Overall neutral voicing that Erin called “a really good speaker,” from the looks to the sound. Measured bass extension of 59Hz (-3dB), with a measured sensitivity of 84.3dB.

Cons: Deliberate dip-and-peak voicing in the crossover region around 2 kHz reduces attack and clarity in the mids and highs: intentional per ELAC’s design, but not to Erin’s personal preference. Lower measured sensitivity (84.3 dB) means it wants more amplifier power than average to reach the same levels. Multitone distortion roughly triples, from about 1% to 3%, between 88 dB and 96 dB output, so it’s happiest at moderate listening levels. A minor distortion bump shows up around 800 Hz in the data, though Erin didn’t hear it. Discontinued and no longer sold new.

Bass Extension (-10dB)46Hz (measured average, Erin’s Audio Corner)
Bass Extension (-3dB)59Hz (measured average, Erin’s Audio Corner)
Crossover Frequency2.4kHz
DIY KitNo
Dimensions14-3/16”H x 7-1/2”W x 9-3/8”D
DriversJET 5 folded ribbon tweeter, 6” aluminum/paper sandwich cone woofer
Frequency Response41Hz - 50kHz (manufacturer specified)
Impedance4 ohms nominal, 3.2 ohms minimum (measured, Erin’s Audio Corner)
Recommended Powerup to 100W RMS
Sensitivity84.3dB (measured average, Erin’s Audio Corner)
Spinorama Preference Score3.94
Spinorama Preference Score with Perfect Sub6.28
Weight15.7 lbs (7.1 kg) each