Wharfedale Super Linton vs ATC SCM19

Last updated: September 16, 2026

Short answer: the Wharfedale Super Linton. It ranks #24 of 130 bookshelf speakers by sound quality at $2699; the ATC SCM19 ranks #119 and costs $3750, which makes this an easy call rather than a real tradeoff.

Wharfedale Super Linton vs ATC SCM19

What the Wharfedale Super Linton offers: Three-way design with a 1” soft dome tweeter, 5” woven Kevlar mid-range, and 8” woven Kevlar woofer in a dual rear-ported, heavily damped MDF/particle-board cabinet. Comes as a genuinely matched pair (measured within about 1dB of each other) and includes custom matching stands. A major dynamic-range improvement over the original Heritage Linton - kick drums retain their impact from low to high volume instead of compressing, the standout objective improvement in this update. Fixes the original Linton’s main flaw: a 1-3kHz scoop that made it sound a bit soft and subdued is filled in here, giving noticeably more attack and dynamic punch. About 3dB more sensitivity than the original Linton (measured ~88.2dB), meaning roughly half the amplifier power for the same output. Wide horizontal radiation of about ±70°, right in the reviewer’s preferred range for an enveloping soundstage. Lower midrange distortion than the original Linton. Bass-shelf tuning intentionally allows closer-to-wall placement (about 1 foot worked well) without excess boominess, more flexible than the original Linton in that regard. Watch for: Rolls off earlier than the original Linton (F3 77Hz versus the original’s 52Hz), a deliberate trade-off for the closer-wall-placement flexibility. On-axis, there’s a mild treble lift around 4-6kHz that can sound a touch sibilant, though the reviewer found it not very noteworthy in practice. Diffraction shows up around 1.5-2kHz on-axis; needs about 10° of toe-out to smooth this out, though going further to 30° starts to lose some top-end air. Distortion peaks slightly higher than the original Linton in the 50-70Hz region. Minimum impedance dips to about 3 ohms around 150Hz, so a 4-ohm-stable amplifier is recommended for best results. Vertical dispersion of about ±20° means multi-row home theater seating outside that window will hear reduced top-end. Asymmetrical design requires attention to setup (tweeters need to face outward) for the most linear in-room response. A costly upgrade for existing Linton owners if the original’s specific flaws didn’t bother them.

What the ATC SCM19 offers: Harmonic distortion at 96dB SPL/1m stays generally low across the range aside from the spike tied to the 700-800Hz resonance. Sealed (unported) cabinet avoids port noise and resonance, and the extremely dense, heavy-duty enclosure (17.8kg/39lb each) reflects ATC’s pro-audio build standards. Watch for: Some stored energy resonance around 500-700hz, 4dB bump around 700hz. Not recommended for the price. CEA2034 spinorama and predicted in-room response both show a very uneven overall balance - a broad accentuation from midrange to treble paired with too little bass - along with directivity error. At 96dB SPL/1m, harmonic distortion tied to the 500-700Hz resonance rises to a level the reviewer says “should not be there.”

Buy the Wharfedale Super Linton. It ranks higher for sound quality than the ATC SCM19 and costs less, so there is no real case for the other one.

Skip the ATC SCM19 if sound quality matters to you. It ranks near the bottom of the 130 bookshelf speakers.

Looking for alternatives? See the complete Passive Home rankings.

Specifications Side By Side

Wharfedale Super Linton ATC SCM19
Price$2,699.00 per pair$3750 per pair
Ranked#24 of 130 in Large Size Bookshelf Speakers#119 of 130 in Large Size Bookshelf Speakers
Bass Extension (-10dB)34Hz (measured, Erin's Audio Corner)34Hz (measured, Audio Science Review)
Bass Extension (-3dB)77Hz (measured, Erin's Audio Corner)60Hz (measured, Audio Science Review)
Dimensions23.8"H x 11.8"W x 13"D (604.5 x 299.7 x 330.2 mm)17.2"H x 10.4"W x 11.8"D (436.9 x 264.2 x 299.7 mm)
Impedance4 ohms nominal (3 ohms minimum, measured, Erin's Audio Corner)6 ohms
Drivers8"(200mm) black woven Kevlar® cone woofer, 5"(135mm) black woven Kevlar® cone midrange, 1" (25mm) soft dome tweeter5.9" Super Linear Magnet cone woofer, 1" soft dome tweeter
Sensitivity88.2dB (measured, Erin's Audio Corner)85dB (measured, Audio Science Review)
Weight43.7 lbs (19.8 kg) each39.2 lbs (17.8 kg) each
Woofer Cabinetported, rearsealed
Spinorama Preference Score5.283.79
Spinorama Preference Score with Perfect Sub7.126.21

More top alternatives to Wharfedale Super Linton:

Prices on this page were last checked September 16, 2026 at 12:41 AM UTC. Product prices and availability are accurate as of that date/time and are subject to change; the price and availability shown on Amazon at the time of purchase will apply to the purchase of this product.

As an eBay Partner, we may be compensated if you make a purchase.

The Two Speakers In Full

Wharfedale Super Linton: $2,699.00 per pair Amazon Crutchfield eBay

Wharfedale Super Linton ranking card

Pros: Three-way design with a 1” soft dome tweeter, 5” woven Kevlar mid-range, and 8” woven Kevlar woofer in a dual rear-ported, heavily damped MDF/particle-board cabinet. Comes as a genuinely matched pair (measured within about 1dB of each other) and includes custom matching stands. A major dynamic-range improvement over the original Heritage Linton - kick drums retain their impact from low to high volume instead of compressing, the standout objective improvement in this update. Fixes the original Linton’s main flaw: a 1-3kHz scoop that made it sound a bit soft and subdued is filled in here, giving noticeably more attack and dynamic punch. About 3dB more sensitivity than the original Linton (measured ~88.2dB), meaning roughly half the amplifier power for the same output. Wide horizontal radiation of about ±70°, right in the reviewer’s preferred range for an enveloping soundstage. Lower midrange distortion than the original Linton. Bass-shelf tuning intentionally allows closer-to-wall placement (about 1 foot worked well) without excess boominess, more flexible than the original Linton in that regard. Measured bass extension of 77Hz (-3dB), with a measured sensitivity of 88.2dB.

Cons: Rolls off earlier than the original Linton (F3 77Hz versus the original’s 52Hz), a deliberate trade-off for the closer-wall-placement flexibility. On-axis, there’s a mild treble lift around 4-6kHz that can sound a touch sibilant, though the reviewer found it not very noteworthy in practice. Diffraction shows up around 1.5-2kHz on-axis; needs about 10° of toe-out to smooth this out, though going further to 30° starts to lose some top-end air. Distortion peaks slightly higher than the original Linton in the 50-70Hz region. Minimum impedance dips to about 3 ohms around 150Hz, so a 4-ohm-stable amplifier is recommended for best results. Vertical dispersion of about ±20° means multi-row home theater seating outside that window will hear reduced top-end. Asymmetrical design requires attention to setup (tweeters need to face outward) for the most linear in-room response. A costly upgrade for existing Linton owners if the original’s specific flaws didn’t bother them.

Bass Extension (-10dB)34Hz (measured, Erin's Audio Corner)
Bass Extension (-3dB)77Hz (measured, Erin's Audio Corner)
Dimensions23.8"H x 11.8"W x 13"D (604.5 x 299.7 x 330.2 mm)
Drivers8"(200mm) black woven Kevlar® cone woofer, 5"(135mm) black woven Kevlar® cone midrange, 1" (25mm) soft dome tweeter
Impedance4 ohms nominal (3 ohms minimum, measured, Erin's Audio Corner)
Sensitivity88.2dB (measured, Erin's Audio Corner)
Spinorama Preference Score5.28
Spinorama Preference Score with Perfect Sub7.12
Weight43.7 lbs (19.8 kg) each
Woofer Cabinetported, rear

ATC SCM19: $3750 per pair Tmraudio eBay

ATC SCM19 ranking card

Pros: Harmonic distortion at 96dB SPL/1m stays generally low across the range aside from the spike tied to the 700-800Hz resonance. Sealed (unported) cabinet avoids port noise and resonance, and the extremely dense, heavy-duty enclosure (17.8kg/39lb each) reflects ATC’s pro-audio build standards. Measured bass extension of 60Hz (-3dB), with a measured sensitivity of 85dB.

Cons: Some stored energy resonance around 500-700hz, 4dB bump around 700hz. Not recommended for the price. CEA2034 spinorama and predicted in-room response both show a very uneven overall balance - a broad accentuation from midrange to treble paired with too little bass - along with directivity error. At 96dB SPL/1m, harmonic distortion tied to the 500-700Hz resonance rises to a level the reviewer says “should not be there.”

Bass Extension (-10dB)34Hz (measured, Audio Science Review)
Bass Extension (-3dB)60Hz (measured, Audio Science Review)
Dimensions17.2"H x 10.4"W x 11.8"D (436.9 x 264.2 x 299.7 mm)
Drivers5.9" Super Linear Magnet cone woofer, 1" soft dome tweeter
Impedance6 ohms
Sensitivity85dB (measured, Audio Science Review)
Spinorama Preference Score3.79
Spinorama Preference Score with Perfect Sub6.21
Weight39.2 lbs (17.8 kg) each
Woofer Cabinetsealed